18" x 5-5/16" Rectangle. Triple incandescent tail light provides stop, turn, tail, rear reflex, and backup functions. Durable black plastic housing. Recessed mount to trailer in horizontal position. 8-Wire design.
Features:
Specs:
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to be taking a look at the Bargman Recessed Triple Long Tail Light with a backup light. This is a 84 Series light. This is a 3 light fixture that has 2 red tails and then 1 reverse light for your trailer or RV. The red lights are going to function as combination brake, tail and turn signal lights. The center is a reverse light that is surrounded by Class A red reflex reflective lens. It is a pretty narrow light for as large as it is. It has got a nice low profile design to it.
It is going to have the really nice stylish black base with the rounded corners, gives it a really nice look. The tail light is designed to be mounted horizontally. It is going to feature replaceable lenses and bulbs. The bulbs are going to sit in a J slot bay and nut socket for a dependable flicker free operation. It is a recessed mount installation, you can see this area right here, this would be recessed.
Then we are going to have mount holes going around the entire perimeter on the light, 3 on top, 3 on the bottom, and then one on each side. Mounting hardware is not included. This is the Department of Transportation compliant, it meets FMVSS and CMVSS 108 requirements. A few measurements to go over with you real quick. When it comes to the overall length, that is going to give us a measurement of right around 18 inches. When it comes to the width, that is going to measure 5 and 5/16 of an inch.
Then when it comes to the thickness, so from the flange to the outer part of the light that is going to be about an inch and a quarter, that is what is going to be what is visible. The overall thickness or depth is going to be right around 2 inches. When it comes to the cut out dimensions, this is the recessed portion, going this direction, that is going to need to be about 3 and 5/8 and then going this direction it is going to need to be about 16 and 1/8 or an inch long. When it comes to the bulb type for the tail light bulb, that is going to be a 2057 double filament and then for the reverse light it is going to be a 1156 single filament. We are going to go and hook it up to our external power source, that way you can see what it looks like with some power running to it. You can see the wire design here on the back. Now I have some of them combined just so I can run it to our external power box, but the white is going to be your ground, the black wires on the sides here are going to be for your stop and turn signals.
The black wire in the center is going to be for the reverse light, and then the green wire for the sides are going to be for the running lights. We will go ahead and get everything connected. We will also be able to turn off our overhead light so you can see it in a low light setting. Again, white is going to be our ground, the 2 black wires are for stop and turn, and 2 green wires are going to be for the running lights. This is going to be the tail light function, when we apply the brakes you can see how that illuminates for a stronger signal output. It is going to do that same thing when we activate the turn signals. Then I will go ahead and connect the reverse light so you can see that one as well. It is going to be in the center. You can see there it has got the nice white light with a clear lens in the center, allows plenty of light to come through. Again, it is going to have the Class A red reflect for reflective lens around the clear lens. That is going to do it for today's look at the Bargman Recessed Triple Long Tail Light with the included back up light. Again, this is 84 Series light.
Average Customer Rating: 4.9 out of 5 stars (234 Customer Reviews)
18" x 5-5/16" Rectangle. Triple incandescent tail light provides stop, turn, tail, rear reflex, and backup functions. Durable black plastic housing. Recessed mount to trailer in horizontal position. 8-Wire design.fast shipping, good product 765879
I plan on using these lights on the rear of an old Holiday Rambler trailer and they will fit the space and cover the holes in the body very well. The style is also very similar to what was installed at the factory. I am very pleased that I was able to find them and will install them as soon as the weather becomes milder later on. They will be easy to install since the wiring configuration is the same as the old ones being removed. thanks again. 466712
Holding up great after the first year, no problems! Thank you! 419173
Service and delivery great thanks 418241
Review from a similar 84 Series in Trailer Lights
Arrived quickly, properly packaged, undamaged, and free of defects. Even included the light bulbs! Nice! ;-) 370660
William C - 04/21/2018Review from a similar 84 Series in Trailer Lights
Exact replacement part. Trailer brake light assembly. Sent thur USPS and arrived in the days stated.. 467198
Review from a similar 84 Series in Trailer Lights
I just wanted to let you know how I came to order though etrailer. Of course I found the signal lights elsewhere online. They did not have enough information on their wiring. My plan to learn more was to go to etrailer, your price was within a few $, and you had plenty of pictures, I could see what I wanted to know. So I ordered through you for have the extra info theother guys didn't. 639550
Review from a similar 84 Series in Trailer Lights
I've installed several sets of these lights on several 5th wheels. The industry "standard" of using a couple of cheap incandescent bulbs for the tail lights is a good way to get run over in bright day light. You can barely see the OEM tail lights in bright sun. These LED lights are very bright and are easily seen even in bright day light. The lights are sealed with only the wire leads exposed to the elements so they can be mounted on a non-flat surface such as a older trailer that has aluminum siding instead of fiberglass. I install the lights using marine butt connectors that have the heat shrink seal to ensure the connection is water tight. For some reason these lights come in a black housing. Who has a trailer that uses black trim, not very many. I remove the lenses from the nylon housing (four screws), paint the housing white and reinstall the lights. No big deal and now you have a color coordinated tail light. Use a #8 one inch self tapping screws to install and you got this project completed. 127743
Review from a similar 84 Series in Trailer Lights
Just wanted to tell you that I have finally installed the product I ordered from etrailer.com, and I must say that it is by far the best product I have ever used. They are bright, and very visible even during daytime. Just wanted to tell you that I have finally installed the product I ordered from etrailer.com, and I must say that it is by far the best product I have ever used. They are bright, and very visible even during daytime. 33119
Review from a similar 84 Series in Trailer Lights
Nice taillights and secure shipping but no wiring diagram or instructions for installing be them. 591561
Heather A - 12/18/2018Review from a similar 84 Series in Trailer Lights
Completed LED conversion. Sharing my completed project with you. 478239
Review from a similar 84 Series in Trailer Lights
After speaking to the folks at ETrailer you realize that if you get a good price on a product from another company but do not have a live person that is qualified to answer your questions, how good of a deal is it? Carol was amazing and very patient making sure I was purchasing the right product. No more purchasing from the MEGA online store when it comes to our fifth wheel trailer, ETrailer is my one stop online store. Also the video reviews they offer for free are very helpful in making my product decisions. 583401
Review from a similar 84 Series in Trailer Lights
Thank you to etrailer for your quick shipping and professional follow up with our Volunteer Fire Department's order. We are updating our concession trailer for a fundraiser event in just a few weeks & your quick turnarounds are helping our deadline for repair. We will definitely purchase from your company again. 557925
Review from a similar 84 Series in Trailer Lights
Awesome product, and very bright specially the turn signal and brake lights. I am sure that people on the road will definitely see my lights on every side because I also installed LED on all my marker, clearance, and license plate lights. I highly recommend this product, and will definitely purchase all my lighting needs from etrailer.com Thanks guys for an awesome product!!! 33112
Review from a similar 84 Series in Trailer Lights
I’m very happy with these LED tail lights. Bought them to replace the ones that came on the trailer. They are bright and seem to be of high quality. They were easy to install. The only slight drawback is that it’s a bit tricky to get the wires to lay flat enough against the light to get it to sit flush with the back of the trailer. But in the end it worked fine. I would recommend these as a good replacement for older, smaller, incandescent tail lights. 612458
Review from a similar 84 Series in Trailer Lights
These are a super tail light and a great quality unit, easy to install. Beats the cheap junk that the manufacture put on your 5th wheels and motor homes. E-trailer is the best got them quick and they always are there for you when you need them. I have bought lots from them and they have never let me down. Have a problem they jump to it a solve the problem right away. GO E-TRAILER YOU ROCK!!!!!!!! 614425
Review from a similar 84 Series in Trailer Lights
Look great Nice and bright Well built Won't install until spring Will probably get the final star for 5/5 then Very fast shipping & good customer service Ordering from etrailer again is a sure thing 581818
Review from a similar 84 Series in Trailer Lights
Finally, a quality replacement for RV Tail Light--92 Series. This surface mounted LED light installs easily after removing the series 92 light. It completely covers the screw holes used for the old style fixture. It’s at least 10 times brighter, or at least it looks that way. Installation was easy. Remove the lens from the old unit and then the screws holding it to your trailer. (Note: many units are surrounded with a bead for caulking, normally white or clear. Use a razor blade around the edges to release the old unit) Once the old units released just connect the new taillight and using stainless steel screws attach the new unit. I also sealed the new unit with a bead of clear silicone caulk. FYI – This unit does not provide a license plate light or means of attaching a license plate. Looks factory installed when you are done. Pictures are old tail light and new installation 113996
Highway B - 01/16/2015Review from a similar 84 Series in Trailer Lights
Just what I needed great product 796947
Review from a similar 84 Series in Trailer Lights
The lightning i purchased looks great , dependable & bright! 793744
Review from a similar 84 Series in Trailer Lights
Found the lights we needed for our 1995 Tioga motorhome on your site. Ordering was easy and the lights arrived promptly. We will definitely use etrailer again! 786882
Review from a similar 84 Series in Trailer Lights
Great lights, works just as described. Looks great. I would recommend them to anyone. 786541
Review from a similar 84 Series in Trailer Lights
Before and after pics of the update to my motorhome. Thanks for the help! 783366
Review from a similar 84 Series in Trailer Lights
Very bright lights. Very easy to instal l. 778395
Review from a similar 84 Series in Trailer Lights
Excellent tail light and exactly as stated in the ad. Fast shipping too! 777125
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.