1. Trailer Axles
  2. etrailer
  3. 7000 lbs
  4. 95 Inch Long
  5. Leaf Spring Suspension
  6. Spindles Only
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs

Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs

Item # e95GR
lowest price pledge
Our Price: $318.53
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 68 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 79-1/4" from spring center to spring center. Easy Grease spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from etrailer. Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs part number e95GR can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Trailer Axles - e95GR

  • 7000 lbs
  • 95 Inch Long
  • Leaf Spring Suspension
  • Spindles Only
  • 79-1/4 Inch
  • No Hubs
  • Easy Lube Spindles
  • etrailer

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 79-1/4" from spring center to spring center. Easy Grease spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
  • 4" Drop, Easy Grease spindles
    • Lowered axle beam provides lower deck height for easier loading and unloading
    • Patented welding process prevents spindle failure with 40% stronger welds
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • CSA, QAI, and SAE-N certified
  • Lifetime technical support from the experts at etrailer.com
  • Made in the USA


Specs:

  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 79-1/4"
  • Spindle drop: 4"
  • Spindle/hub compatibility:
    • Bearings: 25580 inner, 14125A outer
    • Seal: GS2250-DL, inner diameter 2.25"
  • Limited lifetime warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


etrailer Axles

etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



e95GR etrailer by AxleTek Replacement Axle Beam - 4" Drop - Easy Grease - 95" Hub Face - 79.25" Spring Center - 7,000 lbs





Video of Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of etrailer by AxleTek Trailer Axles - 7,000 lbs 95 Inch Long Axle - e95GR

Hi there, I'm Michael with etrailer.com, today we're gonna take a quick look at this trailer axle with the E-Z Grease Spindles. This is gonna be a great option for those of you who are needing to replace an axle on your trailer, or if you're building your own custom trailer, and you're wanting to have more of a customized suspension system, this will also work for that as well. But of course, there are lots of different axles out there, different weight capacities, different lengths, so you wanna make sure that you're getting the right one for you. This is a three inch diameter round steel axle beam, it's got a max weight capacity of 7,000 pounds, so if you have a single axle trailer with a 7,000 pound weight capacity, this will work great for that, but if you have a dual axle trailer, this about weight capacity will obviously double with two axles. The next thing you're gonna need to know is the length, so there's two different ways to measure the length for this axle, the first is gonna be from our spring seats here, which is where our leaf springs attach. That is welded onto our axle so it is gonna be a nice static point of reference for us to measure from.

So from the center of one spring seat to the center of the other, it's gonna be right at 79 and a quarter of an inch. The other way to measure is from your hub face, obviously this axle doesn't have the hubs, those are sold separately, but once you get your brakes and hubs put in place from the hub face on one side to the hub face on the other, it's right at 95 inches. So, if you need a different axle, different weight capacity, different length, we do have lots of other options available here at etrailer.com, so again, make sure you're getting the right one for you. So this axle does have a slight bend right here in the middle, and that's gonna be our camber, and it's going to ensure that as our trailer is under load, our wheels are gonna be at the correct angle so that it's gonna have full road to tread contact across the width of your tire. So, you're not going to have to worry about uneven tire wear, and it's gonna be great for your straight line acceleration, and nice steady towing.

Our spindles are welded in place using a patented welding process that actually allows the spindle to slide over the axle rather than just budding up against it. So that's gonna create about a 40% stronger weld to help prevent spindle failure, it's also going to ensure proper spindle alignment so everything is gonna be in line like it needs to be. You can see this spindle does have a four inch drop, that's going to lower our axle beam and provide a lower deck height so it's gonna be easier to load and unload our gear from our trailer. And then of course, our spindles are the E-Z Grease Spindles, so they do have that built in grease zerk on the end there that's going to make it super easy to hook up your grease gun, pump some grease in there, it's gonna come out this hole here to help fill up that cavity, make sure everything is well lubricated in between your normal maintenance to make sure that your bearings and all that are packed properly. The axle is pre-wired for your electric brakes, so if I zoom back in here, you can see, we've got a dual wire system here that's going to allow us to run this from one side of the axle to the other side.

So it's going to be super easy to hook up your brakes and get that all connected properly, one less wire that you have to run once you get that installed. Your brake flange is here, it's got your mounting points, it's gonna be super easy to get brakes put in place. And then our spring seats, as I mentioned, they are welded onto our axle, they're welded on the underside, so we'll be able to mount our leaf springs in the underslung orientation to create a nice low ride height, again, making it easier to load and unload our gear. So, this is CSA, QAI, and SAE-N certified, so you can trust it is gonna do a good job for you. It's gonna meet those high quality standards so you can trust it is gonna do a good job, hold up well.

It also comes with a limited lifetime warranty, so if you we're to have any problems with it, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers to make sure you're getting good quality products and having a good experience. So, overall, as long as that weight capacity and length work for you, I think this is gonna be a great axle to meet your needs and get the job done so that you can enjoy that trailer again. That's gonna complete our look for today, again, I'm Michael with etrailer.com, thanks for watching..


Customer Reviews

Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs - e95GR

Average Customer Rating:  5.0 out of 5 stars   (11 Customer Reviews)

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 79-1/4" from spring center to spring center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

- e83GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles


Bolted right in. great fit. Shipped fas t.



- e23GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles


Just glad it was in stock



- e35GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e35GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e68GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e73GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e35GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e38GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e73GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e38GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles




- e63GR
by:

Review from a similar etrailer Axle Beam in Trailer Axles



11
11

Ask the Experts about this etrailer Trailer Axles

  • What Wheels and Tires Will Be Under 102" Wide On 95" 7K Trailer Axle
    In regards to a trailer axle with 95" hub face like the Trailer Axle Beam part # e95GR, you'll likely need to use offset wheels and narrow tire to stay under the 102" max trailer width. The best we could get is 103.3" using the the Dexstar Conventional Steel Wheel part # AM20766 and Westlake ST235/80R16 Radial Trailer Tire part # LHWL401. If you switch to the Trailer Axle Beam part # e35GR you can get down to 102.3" which should not get you into any legal trouble. If you don't already...
    view full answer...
  • Replacement 3 Inch Diameter Axle Beam with 95 Inch Hub Face Dimension
    An axle with a 3 inch diameter axle tube typically has a 5200, 6000 or 7000 lb capacity. The inner and outer wheel bearings would be the determining factor that would tell you the actual capacity. We do have 95 inch axles (hub face to hub face dimension) but none of our offerings have the proper spring seat spacing, so you'd need to add seats in the correct locations. • For a 95 inch 5200 lb axle with spindles compatible with a 25580 inner/LM67048 outer bearing, use # e55GR • For...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Noah M
Updated by:
Noah M
Employee Mike S
Written by:
Mike S
Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624