6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
(50 reviews)
Price: $74.99
In Stock
6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
Item # e94SR
Our Price: $74.99
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (50)
- Q & A (0)
- Photos
etrailer Trailer Leaf Springs - e94SR
- Double Eye Springs
- 26 Inch Long
- 1-3/4 Inch Wide
- 6000 lbs
- 6 Leaf
- Painted
- etrailer
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Features:
- Leaf spring acts as part of your trailer's suspension system
- Provides attachment point for your trailer's axle
- Multiple leaves allow flexibility to absorb road shock
- Allows for a smooth ride
- Reduces wear and tear on trailer
- Ensures level ride on bumpy and uneven surfaces
- Sturdy steel construction
- Nylon bushings included
- Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
- Spring attaches to hanger mounted on trailer frame at one end
- Other end connects to shackle straps suspended from hanger or equalizer
Specs:
- Quantity: 1 leaf spring
- Spring capacity: 3,000 lbs
- Axle capacity: 6,000 lbs
- Length from center of spring eye to center of spring eye (unloaded): 26"
- Spring width: 1-3/4"
- Eye diameter with bushing: 9/16"
- Eye diameter without bushing: 11/16"
- Leaf thickness: 3/8"
- Number of leaves: 6
- Additional dimensions: see table
| Part Number | A | B | C | D |
|---|---|---|---|---|
| e94SR | 13" | 14" | 26" | 4-1/4" |
Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.
Double-eye leaf springs attach to hangers that are welded onto your trailer. One end of this spring will attach directly to the hanger with a suspension bolt. The other end will attach to shackle straps that are suspended from a hanger. These straps allow the spring to move and pivot so that it can better compensate for uneven pavement. If you have a tandem- or triple-axle trailer, the shackle straps will be attached to the equalizer that connects multiple springs.
To mount this spring, you will need hangers, shackle straps, and suspension bolts. If you are simply replacing a spring, you may still have hangers welded onto your trailer. You should, however, replace your shackle straps because they are usually the first component to wear out. You may choose to replace old suspension bolts as well. It is recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.
If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.
e94SR etrailer Double Eye Trailer Leaf Spring - 6 Leaf - 6,000-lb Capacity
Compares to SP-053275
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long - e94SR
Average Customer Rating: 4.5 out of 5 stars (50 Customer Reviews)
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.by: Tyler07/18/2023
So far based on visual inspection and install I am super pleased with these springs. I have not gotten to tow with them yet but I’m sure they will not disappoint. I had to get them to increase the clearance between the axle and Frame of my car trailer due to me upsizing to a 6000lb 3” diameter axle. I purchased 2 at first because I was not sure this would work for what I was trying to do but once they were finally delivered I installed that night and ordered 2 more for the other axle.
by: MoBo10/11/2023
Junk don’t buy then! They don’t last 1000 miles before braking and bending. Old springs where 10yrs old will 100k miles on them. The are total junk and they don’t have a warranty so you will be out all your money when this crap brakes!!!!
by: Vince04/27/2023
Perfect replacement for my old springs. These 6 leafs are a great value. Replace the nylon bushings with bronze: Customer service Rep Jon answered all my questions. That’s what I like about etrailer
by: Kevin08/17/2023
Box arrived looking like it had been thrown off of a truck, it was destroyed . The lippert control panel that was thrown in with the heavy axle springs was damaged. Will not ever buy from this company again
by: Roger 11/08/2023
Every thing came very fast, took old parts out and installed new parts ,springs and hardware went together very good
by: Jacob M11/18/2023
I haven't installed them yet, but the product looks correct. However the packaging was a bit disappointing, all 4 leaf springs were seemingly dumped into a square box, although there was wrapping paper, they were not individually wrapped, this allowed them to rub against each other and chip the paint.
The box must have needed to be taped in transit, as the leaf springs appeared to have been bulging out the sides. I would have expected a rectangular box that would have fit these items better.
by: MoBo11/03/2023
This is second set and first broke after only a few hundred miles. They blamed me stating I didn’t install it right but that is a lame reason for the springs to break! One failed and caused the other to twist so if this happened again then there is no way it is my fault as I had them installed at Rv shop. I watched them torch the hell out of the bolts XXX# plus as that’s was highest torch wrench would go.
by: J.R.G.10/07/2023
I am satisfied with the product. I like the service, products and the etrailer store in general.
by: Jeremy 10/18/2023
They sent it out super fast. Great people always.
by: Phillip12/03/2022
This is not my first purchase with the trailer so I can speak with a little experience. This leaf spring kit and several other recent purchases I've made. Have been very well presented, with adequate information to make an informed choice of the product.
I did shop around I almost always do, once you consider the what it takes to get the product to you E trailer is vary competitive if not the best.
by: Chris05/02/2023
High quality parts. George J from etrailer helped get my order when it was back ordered and got my parts switched to a different manufacturer but same part. Worked out perfect
by: Kenneth 11/06/2023
As described and on time!!!
by: Aaron 10/22/2023
We’ll built springs
by: Patrick12/17/2022
I have not been able to use parts as UPS lost one entire shipment, damaged another shipment and etrailer left some parts out of the replacement shipment. I want to replace all the items on my trailer together in one day.
Anyways, your company has been good about fixing the issues.
I hope UPS pays for the damage and lost shipments.
by: Chris 09/16/2023
Quick delivery and exactly like the pic ture
by: Gerald 09/07/2023
Everything was right good job!
by: Todd 08/11/2023
Great products at great prices
by: Burton12/16/2022
Had a small issue with UPS delivering ,but eTrailer took care of the problem with a very timely replacement!!!
by: Michael 05/09/2023
fit in great
by: Ronald 05/20/2023
Hopefully the new springs hold up better then Lipperts.
by: Kevin 08/26/2022
Exactly what I needed to get my toy hauler back sitting and riding right! Thank you for your amazing customer service
by: Jake D08/02/2022
Awesome customer service
by: Gilbert 07/29/2022
Received in great shape ready to instal l!
by: Leoncio10/16/2023
25
50
Show More Reviews
See what our Experts say about this etrailer Trailer Leaf Springs
- Distance Between Front and Rear Suspension Hanger on Single Axle TrailersFor single axle trailers you want the front and rear hangers to be the exact length of the leaf spring measured from eye center to eye center. So for the leaf spring part # e94SR you would need the hangers to be 26 inches apart.
view full answer... - Determining Rough Weight Capacity Of TrailerBased solely on the information you gave, I would guess that you have a capacity between 2000 lbs max and 3500 lbs max. It is not possible for me to determine the exact weight capacity based on dimension. You will need to determine your axle capacity and the capacity of each individual component. The lowest rated component becomes your maximum capacity for your trailer. Based on your tires, you will be limited to 3200 lbs already. Most of the axles that are 38mm or 1-1/2 inches are...
view full answer... - Replacement leaf spring for 2015 Open Range 337rls with 5200lb axlesYou are correct saying that the leaf spring can stretch a bit over time, and it sounds like that is exactly what happened; you need a 26" (eye to eye) double-eye leaf spring. I recommend going with the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR, which you'll need 4 for your dual axle trailer.
view full answer... - Do I Need To Remove Trailer Leaf Spring Before Measuring For Replacement?You can measure your leaf spring (eye to eye) while it is still installed on the trailer, but first you'll want to jack up the trailer so that the leaf spring is completely unloaded. Also, it is possible that your springs are worn and stretched ever so slightly, so keep that in mind while looking for replacement springs since you may find some springs a tiny bit shorter than your current worn out springs. the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e94SR you were looking...
view full answer... - What Distance Should There Be Between Axles On A Triple Axle Trailer?From what I can find, for 5200 lb axles you will want 29.5 inches between the hangers center to center and 33.25 inches axle center to center for double eye springs in most cases. Your equalizers and shackle straps will take up some of that measurement difference between your springs.
view full answer... - Picking Out Replacement Trailer Leaf Spring Info NeededWithout knowing what axle capacity you have it's hard to say exactly what leaf spring you would need. But for a 5 leaf spring we only have 6k axle springs like the part # e34SR which is 25-1/4 inches long overall. Normally the two pieces of info needed for replacement springs is axle capacity (most important) and length so that you hopefully don't have to move hangers. The amount of leafs does not typically matter.
view full answer... - Leaf Spring Recommendation for Trailer with 3 inch Diameter Axles with Springs are 26 inches LongA 3 inch diameter trailer axle is very commonly a 6k axle so you are on the right track with your estimate on the capacity. We have the part # e94SR which is a 6k leaf spring that has 6 leafs like you need and is 26 inch from eye to eye.
view full answer... - Pick out Replacement Leaf Springs for 2018 Grand Design 303 RLSI would need to know the length of your current springs and we'd be able to help pick out the correct replacements. The etrailer springs part # e34SR are for a 6k axle like you have and are a very common size at 25-1/4 inches. Keep in mind that old worn out springs do stretch a little bit as they flatten out so if yours is a little longer than this it would be perfect. Another common size is 26 inches like the part # e94SR.
view full answer... - Replacing Leaf Springs On A 2020 Montana High Country 295RLI can certainly point you in the right direction. According to the online owners manual, a 2020 Montana High Country 295RL has a GVWR right at 14,000 lbs. So we are likely dealing with a pair of 7K rated axles. Now I do not have a way to look up the exact length of your leaf springs. If only it were so easy right? We would need you to measure the current leaf spring from eye to eye across. The best way is to jack up the camper and measure the spring when it is not under a load. For example...
view full answer... - How to Determine Correct 6,000 lb Double-Eye Leaf Springs For 5th Wheel TrailerWe can tell you how to determine the correct replacement 6,000 lb leaf springs for your 5th wheel trailer, though don't have a way of knowing specifically what is on any one trailer. It's pretty simple though, as all you have to do is measure the length from center-to-center of the spring eyes to get the right fit. Keep in mind that springs elongate and flatten a bit over time, so you can go with ones that are a bit shorter than your measurement. For example, if you get a measurement of...
view full answer... - Leaf Spring Recommendation for 2003 Arctic Fox 5th wheel 29-5TYou'd probably want 6k rated leaf springs. Which for that we have the part # e34SR which is the very common length of 25-1/4 inches. The other popular length of trailer leaf spring that we offer is 26 inch like the part # e94SR. You'd need to measure the springs of your trailer when unloaded to determine which you'd want.
view full answer... - Replacement Leaf Spring For 2022 Grand Design 295RLCertainly; the correct leaf spring for your 2022 Grand Design 295RL is the 6-Leaf Double-Eye Spring # e94SR.
view full answer... - How to Determine the Correct Replacement Double-Eye Trailer Leaf Spring for a Boat TrailerA trailer leaf spring will wear out over time and the wear will likely lengthen the spring. Therefore, the correct replacement leaf spring will likely be shorter than the leaf spring you have on your trailer now depending on the amount of wear that has occured. If the leaf springs you have on your trailer now are 26-1/2" long from the center of each eyelet, I recommend using a 26" long leaf spring like part # e77SR for 2,000 lb, part # e27SR for 4,500 lbs, or part # e94SR for 6,000 lbs. All...
view full answer... - Replacement Leaf Springs For Tandem Axle Trailer With 5,200LB Axles and 29-1/2" Hanger Seperation You are going to need 26" long leaf springs. We have our Standard # e94SR or the Rust Resistant # e88SR springs you can select from. Both of these are the correct 26" length you need and have a weight capacity of 3,000lbs per spring. Be sure to replace all 4 of your springs so they work together and do not place excess weight on one of the axles due to having a slightly higher spring rate than the 5,200lb springs you currently use.
view full answer... - Picking Out Replacement Leaf Spring for Montana High Country with 5,200 lb AxlesI don't have a way to look up what you would need but if you measure your current springs we can help point you in the right direction. We have 6k axle springs that will work great but we don't have any 5,200 lb options. So for a 26 long spring you'd want the part # e94SR, for 25-1/4 inch you'd want the part # e34SR, or 25-1/8 inch # e47SR.
view full answer... - How to Choose Correct Replacement 6K Leaf Spring for Montana High Country 5th WheelWe have a handful of 6K leaf springs, like the part # e94SR you were looking at, that could potentially work for your Montana High Country but I'll need you to measure the distance from the center of one eyelet to the center of the other eyelet to make sure we get the correct length to you. The correct way to do this is to lift your trailer up by the frame so there isn't any weight that's compressing the leaf spring. Once we know the length of your leaf spring I'll be able to make a recommendation...
view full answer... - How to Determine Correct 6,000 lb Leaf SpringsI can help you determine the right replacement 6,000 lb double-eye leaf springs for your trailer, though we don't have any way of knowing what specific ones that trailer needs and I couldn't find a reference to the part you mentioned. It's pretty easy though, as all you need to do is measure your current leaf springs from center-to-center of the spring eyes. Leaf springs also flatten a bit over time, so you should go with ones that measure a bit shorter than what you currently have. For...
view full answer... - Determining Correct Replacement Leaf Springs For 2007 Keystone Montana5th Wheel W/ 6000lb AxlesI would be happy to recommend replacement leaf springs for your 2007 Keystone Montana 3075RL 5th Wheel Trailer but I will need to know the center eye of spring eye to center of spring eye measurement, and the width of the leaf spring first. You will need to take this measurement with no weight on the axle or you will get an inaccurate measurement. For example the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR is rated for 6000lbs measures 26" from center of spring...
view full answer...
- Replacement Leaf Spring Recommendation for 2009 Forest River CardinalTypically as springs wear out they stretch or get longer as they flatten. So when picking out a replacement spring normally you go with one slightly shorter than what you measure but most importantly the correct capacity based on the axle. The temptation is to go with a higher rated spring than needed but this will just give you a harsher ride than ideal as the spring will move less. So the best solution is the leaf spring part # e94SR which is a 6k spring that is 26 inches long. This matches...
view full answer... - Replacement Options for 26-1/2" 7-Leaf Springs on Older Stock TrailerThe closest that we have is a 6-Leaf spring with a 26" eye-to-eye measurement: - 4,500 lb Axle # e27SR - 6,000 lb Axle # e94SR If you're measuring your leaf spring with the trailer loaded then either of the options referenced above should work just fine as long as the weight rating matches your axle. Be sure to change out all of your leaf springs so they all have the same amount of leaves and your trailer rides smooth.
view full answer... - How to Pick Out Replacement Leaf Springs for 2007 Weekend Warrior Model CR3905I was able to find out that your 2007 Weekend Warrior model CR3905 is triple axle trailer with a GVWR of 16k. That means for each axle you'd need a capacity of at least 5,333 lbs. Which means you most likely have 6k axles. We have a few options for that capacity for leaf springs but you'll need to measure the length of your current springs to be sure. If you have 26 inch long springs you'd need part # e94SR. If you have 25-1/4 inch long springs you'd need part # e78SR. You should note...
view full answer... - Is the Difference Between Trailer Leaf Spring Ratings the Number of LeavesThe rating of the springs part # e94SR and # e64SR is more than just the amount of leaves that are used in each. We have several very high rated springs that use just a few leaves and a few lighter rated ones that use several. It really is just a combination of the individual ratings of each leaf and the number of them.
view full answer... - How To Properly Measure For Replacement Leaf Springs on a Trailer with Triple AxlesFirst thing you will want to do is pick leaf springs that are as close to the axle capacity as possible. It is also highly recommended to replace your leaf springs in pairs, new set per axle. Thanks for your pictures it looks like you actually have a triple axle trailer with 6 leaf springs that have 6 leafs per spring like the # e94SR. You will want to also measure the distance from eye to eye of your old leaf springs and then pick a leaf spring with the same weight capacity of your trailer...
view full answer...
- Correct Replacement Leaf Springs for a 2020 Grand Design Reflections 337RKSIn order to find the correct replacement leaf springs for a 2020 Grand Design Reflections 337RKS, you'll simple need to measure their length, unloaded, from the center of each eye. I recommend going with the Double-Eye Spring for 6,000-lb Trailer Axles part # e34SR for 25-1/4" or part # e94SR for 26" long. Please note, the number of leaves does not really denote capacity as leaves have different thicknesses.
view full answer...
Do you have a question about this Trailer Leaf Spring?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Kevin C
Expert Research:
Jameson C
Video Edited:
Joshua S
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Manda E
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/21/2023
Oh no! I am sorry that the order was not packaged well enough to survive delivery. I will have our Customer Service team reach out to you.