bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. Double Eye Springs
  4. 26 Inch Long
  5. 1-3/4 Inch Wide
  6. 2000 lbs
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long

4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long

Item # e77SR
Our Price: $47.99
Trailer Leaf Springs
Orders above $99 qualify for Free Shipping
Shipping Weight: 10 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long part number e77SR can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (61)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e77SR

  • Double Eye Springs
  • 26 Inch Long
  • 1-3/4 Inch Wide
  • 2000 lbs
  • 4 Leaf
  • Painted
  • etrailer

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Spring attaches to hanger mounted on trailer frame at one end
    • Other end connects to shackle straps suspended from hanger or equalizer


  • Quantity: 1 leaf spring
  • Spring capacity: 1,000 lbs
  • Axle capacity: 2,000 lbs
  • Length from center of spring eye to center of spring eye (unloaded): 26"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 1/4"
  • Number of leaves: 4
  • Additional dimensions: see table

Double-Eye Spring Diagram

Part NumberABCD

Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.

Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.

Double-eye leaf springs attach to hangers that are welded onto your trailer. One end of this spring will attach directly to the hanger with a suspension bolt. The other end will attach to shackle straps that are suspended from a hanger. These straps allow the spring to move and pivot so that it can better compensate for uneven pavement. If you have a tandem- or triple-axle trailer, the shackle straps will be attached to the equalizer that connects multiple springs.

To mount this spring, you will need hangers, shackle straps, and suspension bolts. If you are simply replacing a spring, you may still have hangers welded onto your trailer. You should, however, replace your shackle straps because they are usually the first component to wear out. You may choose to replace old suspension bolts as well. It is recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.

If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.

e77SR etrailer Double Eye Trailer Leaf Spring - 4 Leaf - 1,000-lb Capacity

Compares to SP-124275

Customer Satisfaction Score:

Customer Reviews

4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long - e77SR

Average Customer Rating:  4.6 out of 5 stars   (61 Customer Reviews)

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


Perfect replacement springs for our 1967 Shasta Compact Trailer. "Daisy" will ride much nicer (and a tiny bit higher) with her new springs. After checking out all the videos and questions/answers etrailer had on leaf springs and also chatting with the folks on-line, we were confident that we had found the right leaf springs to replace our 57 year old ones.


Product was good, customer service turned me away from being a repeat customer. I ordered the wrong part, once I realized I ordered the wrong leaf spring I called immediately after I placed the order to cancel it and order the right one and was told since I already placed an order I would have to pay a restocking fee that was about 1/2 the price of the leaf spring. I was less than 5 minutes from when I placed the order to when I called to cancel it


i was looking for some springs that were rated for 1750 to 2000 lbs each. i ordered these and when they arrived i saw the tag on each spring then tried to return them but was told i could not. that is terrible customer service !!!! i in turn ordered another set from another supplier.

Etrailer Expert

Katrina D.


It sounds to me like you were needing part # e22YR, which is a 2,000 lbs leaf spring for a 4,000 lbs axle. I apologize for any confusion, and the fact that you were unable to return these springs.


These hubs save time being pre-greased witch means alot for shop production. Shipped on time as always.


Exact Fitment & higher quality than OEM. I’ve ordered replacement parts from etrailer for several years now and haven’t been disappointed yet.


Easy installation holding up well.


Great place to deal with, they had exactly what I was looking for.


Leaf springs were great. One was missing a bushing, so they express mailed one to me right away. They are by far the best customer service of companies I deal with!


I was in need of springs for my boat trailer and went to Etrailer first. I have purchased many items, from tow bars to trailer parts and etrailer has what I need with excellent service, parts and shipping. These springs are new and well built.


Excellent Customer service!


Perfect. More perfect if made in USA!


This part is not descriptive enough. I ordered these for a boat trailer. Axle is 2000 lbs. The boat weighs around 1400 lbs. These springs are only rate for 1000 lbs each. To me, that should be in the description. I had to place another order and have to take off the new spring and put the new order springs on. Thanks.

Etrailer Expert

Jenny N.


Whoah! Hang onto those springs! For a single 2000 pound axle trailer, each spring would be rated as 1000 pounds since 2 springs are used per axle. It is extremely common with boat trailers, especially.


Fit well and were in stock. Had my trailer repaired real soon


It worked well and was a great value.

by: 01/13/2023

Fast shipping, item a match to project from basic measurements, fits to size, quick basic installation.


It was easy to look the part up I wanted and it was great and fast service.


These springs fit well, the measurements were correct. They will work great!!


Fast Shipping. Great Quality Product!!


Exactly what I needed and was easy to i nstall.


Video is helpful came on time and fit perfect thank you


Would have been nice if it came with ha rdware


Excellent customer service the young lady I talked to did a brilliant job she helped me get the right item first time I highly recommend her and you buisness


Service is outstanding


Exact fit


It was time. Had to rid of the rusty 44' Ford springs. Another "classic" swap for new.

Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Springs

  • Recommended 26 Inch Double Eye Springs for 1-1/2 Inch Square Axle Compatibility
    The 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR are way to strong a spring for your 1-1/2 inch square axle. Typically 1-1/2 inch square axles have a capacity between 1000 and 2000 lbs. I recommend instead using the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR which will match the standard capacity without making the ride too firm adding to bounce. Don't worry about the number or leaves but rather the capacity rating. I also recommend...
    view full answer...
  • Trailer Leaf Spring Options For 2,000 lb Trailer Axle with Idler Hubs e82GR
    We do have a number of options for you to add leaf springs to go with the Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # e82GR. The right one is going to depend on some measurements though, as there isn't a spring designed specifically for any axle. So what you will want to do is measure the length of your current spring you are replacing from the center of one spring eye to the center of the other eye, and match that as close as you can. Keep in mind there...
    view full answer...
  • Replacement Trailer Suspension For Single Axle Boat Trailer
    From the looks of the photo you sent it does not look like you have an OEM suspension system on your boat trailer. I recommend securing the suspension rail to the trailer frame in a more secure manner like drilling and using bolts so that it does not shift. If you look on the frame of your trailer there should be a plate with the trailer VIN number and the axle capacities of the trailer. You will want to pick leaf springs that are as close to the axle capacity as possible. You will want...
    view full answer...
    Image 1 for
  • 12 inch Trailer Wheel and Tire with Higher Speed Rating
    I suggest moving to a radial tire for your highway application. We have a 12 inch trailer tire that has an 81 mph speed rating with the # TT48012C. This has a tire size of 4.80-12 and would fit and work well for you, except it is not mounted on a wheel. Normally I would recommend a tire and wheel combination but since you need the higher speed you will need to purchase the tire and wheel separately. There are many 12 inch styles and colors of wheels with the 4 on 4 bolt pattern for you...
    view full answer...
  • Replacement Leaf Springs and Suspension Parts for 1962 Forester Camper Trailer
    Trailer makers do not maintain specs on items like suspension components but it is not difficult to identify correct replacement suspension parts like leaf springs and shackle straps. It is usually best to remove one of the leaf springs to measure it when it is not under tension. This gives the most accurate eye-to-eye dimension. Also note that a well-worn leaf spring can actually stretch a bit. Leaf springs can easily elongate as much as 1/2-inch, sometimes more, if they are very old...
    view full answer...
  • Replacement Leaf Spring for 2,000 lb Axle with Eye to Eye Leaf Spring Measurement of 26-1/4 Inches
    Your leaf springs will expand under weight and then also use shackle straps before the equalizer. Over time the leaf springs do stretch a little, so I recommend the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR as a replacement for your springs. I've attached an article on suspension to help further.
    view full answer...
  • Leaf Springs for 1964 Aristocrat Lo-Liner 13 Single Axle Travel Trailer
    Your Aristocrat's axle may have a sticker or tag indicating its weight capacity, or you can use the Lo-Liner 13's listed dry weight of 1300-lbs as a guide. This dry weight suggests it has a 2K axle which would use 26-inch 4-leaf springs # e77SR. Your best bet for selecting new leaf springs for your vintage Aristocrat is to remove one completely so you can measure its eye-to-eye length without it being under load. You're right that springs do stretch over time and your spring that is now...
    view full answer...
  • Purpose of Steel Band on Trailer Leaf Springs and Which Side of Axle it Should Go On
    The clips on the # e77SR leaf springs are designed to be forward of the axle due to braking axle wrap (twisting). The straps/clips aren't super strong to prevent this but they're still there. If the strap comes off or the leaves come apart it is time to replace the springs.
    view full answer...
  • How to Determine the Correct Replacement Double-Eye Trailer Leaf Spring for a Boat Trailer
    A trailer leaf spring will wear out over time and the wear will likely lengthen the spring. Therefore, the correct replacement leaf spring will likely be shorter than the leaf spring you have on your trailer now depending on the amount of wear that has occured. If the leaf springs you have on your trailer now are 26-1/2" long from the center of each eyelet, I recommend using a 26" long leaf spring like part # e77SR for 2,000 lb, part # e27SR for 4,500 lbs, or part # e94SR for 6,000 lbs. All...
    view full answer...
  • Leaf Spring Recommendation for 1996 Calkins Boat Trailer
    If you can get me the overall length of your slipper springs and the axle capacity of your trailer I can help you pick out the correct replacement.
    view full answer...
    Image 1 for Image 2 for
  • Leaf Spring Recommendation for Older Trailer with 30 inch Springs
    30 inch long leaf springs are longer than what we have replacements for so the only option we'd have would be for you to move your hangers and go with a properly rated leaf spring for the axle capacity. For a similar rated leaf spring we have the part # e77SR which will work great as it is for a 2k axle and the springs are 1-3/4 inch wide like you have as well.
    view full answer...
  • New Suspension Components for 1971 StarCraft Galaxy 8 Pop-Up Camper
    I wouldn't recommend using spacers. Your best bet would be to use the replacement springs along with replacement sprig hangers of the same height as those you're replacing. To get the correct length of leaf spring, make sure you measured the eye to eye distance while the trailer was up on jacks with the axle hanging freely. The hangers would need to be welded into place, but it's a pretty simple job. If you click the provided link, you can see the replacement spring hangers and hanger/shackle/hardware...
    view full answer...
  • Replacement Leaf Springs for Small Cox Boat Trailer
    To help you get the correct springs, unfortunately the VIN is not a help as I tried to get information online. If you know the number of axles and axle capacities, then some simple measurements will help me get you the correct replacement parts. I've attached some articles and a video to assist as well as a photo to help get the dimensions needed.
    view full answer...
    Image 1 for
  • Recommended 26 Inch Leaf Springs for 1,500 or 2,000 Pound Trailer Axle
    When measuring your existing leaf springs, you will want to measure the length from the center of spring eye to the center of spring eye. If you measured a length of 26 inches, then the 4-Leaf Double-Eye Spring # e77SR should be a perfect replacement if you have a 2,000 pound axle. To confirm your axle rating, I recommend checking for a plate somewhere on the axle itself that lists its capacity. Even if you do find that your axle has a 1,500 pound capacity, this leaf spring set will still...
    view full answer...
  • Are Leaf Springs Installed Under the Axle or Over the Axle?
    Trailer leaf springs are traditionally mounted under the axle. To mount them on top of the axle, you need to use an over-under kit to allow you to put spring seats on top of your axle. If you already have the spring seats mounted on top and bottom, then you can choose which orientation you desire based on your desired trailer height but springs will mount only where spring seats are on the axle. If you only have them installed on the bottom, then you will need a kit to allow you to install...
    view full answer...
    Image 1 for
  • Replacement 2K 26 Leaf Springs for Boat Trailer
    The correct leaf spring to use will be the 4-Leaf Double-Eye Spring part # e77SR which is 26" long but keep in mind leaf springs stretch over time so the correct replacement is usually shorter than the existing. In regards to the u-bolts, the correct kit would be the CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles part # CE23000. Then for the shoulder bolts, you can just use part # 166081.
    view full answer...
  • Availability of Slipper Spring for Boat Trailer that is 24 inches Long
    What you have is a slipper spring. This is a common style of trailer spring which we have a few options that are near your 24 inch dimension. We have the part # e77SR which is for a 2,000 lb axle, # SP-178275 which is for a 1,500 lb axle, and # SP-177275 which is for a 1,000 lb axle.
    view full answer...
  • Recommended Bolt On Hangers For Aluminum Frame Trailer
    Since you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR you were looking at. If you went this route you would want to use something like the # SP-040275 as your springs, which have a 3700-lbs capacity. This would be the best solution available for your new aluminum trailer,...
    view full answer...
  • Replacement 26 Inch Long, 2,000 lb Double Eye Leaf Springs For Pacific Boat Trailer
    I would love to give you a list, but the only compatible parts we have are the leaf springs and the shackle straps. I'll go ahead and list those out for you: - 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR - Shackle Strap - 2-1/4" Long - Galvanized # 18-11GALV The prices can be seen below.
    view full answer...
  • Idea for Trailer Suspension Where Slipper Spring Pops Out of Hanger
    A better option would probably be to go with a double eye setup like with the spring part # e77SR and the hanger kit part # APS4. This for sure wouldn't ever come out like your slipper setup.
    view full answer...
  • Recommended Leaf Springs and Hardware for 2001 EZ Loader Boat Trailer With 1560 lb Axle
    There are different leaf spring lengths available for your axle capacity, so you will need to measure from the center of spring eye to spring eye. We have these 3 options: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long # SP-113275 For your connection to your hangers, you will want the Shackle Bolt with Locknut for Double-Eye...
    view full answer...
  • Length From Center of Spring Eye to Center of Spring Eye on 4-Leaf Double-Eye Spring
    The length from the center of one spring eye to the center of the other spring eye of 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # e77SR is 26 inches as you can see in the accompanying diagram.
    view full answer...
    Image 1 for
  • Recommended Suspension Components for 2014 Flagstaff MAC 206 LTD Camper
    To help you with the replacement parts you need, you will need to measure your springs from eye to eye. We have the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR, the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR, or the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long # SP-113275. If you are replacing one hanger, then you will need to know the dimensions. I have attached the link to your options. If you are replacing...
    view full answer...
    Image 1 for
  • Replacement Leaf Spring for a 2011 Forest River Rockwood 1940LTD
    Thanks for the picture and the measurement! If you measured your suspension with the trailer sitting on the ground the springs have stretched with the years of use and won't be 28" long. You're probably going to be closer to 27" which means you'll need the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles item # e97SR or even 26" which you'd replace with the item # e77SR. To get an accurate measurement of the eye to eye distance you will want to jack up one side of your Rockwood trailer...
    view full answer...

< Previous
123. . .4

Do you have a question about this Trailer Leaf Spring?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Kevin C
Installed by:
Kevin C
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Mike S
Written by:
Mike S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.