bing tracking image
  1. Trailer Axles
  2. etrailer
  3. 5200 lbs
  4. 95 Inch Long
  5. 80 Inch
  6. Spindles Only
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs

Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs

Item # e63GR
lowest price pledge
Our Price: $329.14
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 45 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from etrailer. Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs part number e63GR can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (49)
  • Q & A (0)
  • Videos (3)
  • Photos
  • Why etrailer?

etrailer Trailer Axles - e63GR

  • 5200 lbs
  • 95 Inch Long
  • 80 Inch
  • Spindles Only
  • Leaf Spring Suspension
  • No Hubs
  • etrailer
  • Easy Lube Spindles

Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, Easy Grease spindles - no drop
    • Patented welding process prevents spindle failure with 40% stronger welds
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • CSA, QAI, and SAE-N certified
  • Lifetime technical support from the experts at etrailer.com
  • Made in the USA


Specs:

  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Axle diameter: 3"
  • Spindle/hub compatibility:
    • Bearings: 25580 inner, 15123 outer
    • Seal: GS2250-DL, inner diameter 2.25"
  • Limited lifetime warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


etrailer Axles

etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



e63GR etrailer by AxleTek Replacement Axle Beam - Easy Grease - 95" Hub Face - 80" Spring Center - 5,200 lbs





Video of Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Easy Grease Spindles Trailer Axle Beam Installation

Hey everybody, how's it going Today we're gonna be going over the line of trailer axle beams with easy grease spindles. This trailer axle beam here is gonna be an excellent option for your trailer, whether you're replacing a damaged or broken axle or you're upgrading to a higher capacity. So this axle thankfully is offered in a wide variety of different configurations. We have a ton of different options to choose from based on a few different factors. Number one is the length of our axle both the hub face and the spring center. There's gonna be several different options for each of these.

There's also gonna be different axle capacities based on how heavy you need your trailer axle to be and how heavy your trailer is. Now we always recommend replacing what's on your trailer with the exact same one that came off. So for example, if your old axle had an 89-inch hub face, that's what we'd recommend replacing it with. And the same goes for the weight capacity although you can upgrade. So in regards to capacity, our axle here is offered in a capacity from 2000 pounds all the way up to 7,000 pounds.

So no matter what capacity you need, we should still have an option for you. Now, in addition to the capacity, we're also gonna have axles with a built in drop if you need that or just a straight axle. And we also have some different kits that are gonna come with some different components. We can either purchase the axle, just the spindle only axle. We can get this with an idler hub or we could get this with an electric brake drum and some electric brakes depending on what capacity you need.

So this is actually a leaf spring axle not to be confused with a torsion axle. And as we know, most leaf spring axles are round, which all of the etrailer axles are. So therefore you're gonna make sure that you choose a round U-bolt kit. We'll get into that a little bit later. They're also made in the USA.

So you know you're getting a quality product. So one of the main standout features of this axle is the built-in zerk fittings into the end of the spindle. So if we remove this plug here from our grease tap, you're gonna see that zerk fitting. And what this is going to do is this is gonna allow for extremely easy maintenance. So most trailer manufacturers are gonna recommend that you re-grease the axles every year and make sure you pump a couple of grease into them before each trip. So as opposed to taking the cap off there and packing some more grease into your hubs, you're gonna be able to easily insert that grease there into the spindle, into the bearings there using the zerk fitting here on the end of the spindle. So just keeping a grease gun on your trailer or in your vehicle. It's gonna allow you to easily maintenance your hubs here, keeping and preserving the life of your axle. So now that we've gone over these axles a little bit, let's go ahead and show you how to pick out the correct one. Well, in order to find the correct replacement axle for your trailer, there's a few things you need to do. The first one is we need to determine the capacity. The first place I always check for the axle capacity is on the axle tag, which is actually located on the axle. Now most of these are in the center and they could be a white sticker or they could be a metal plate. Now, not all of them list the axle capacity but the vast majority do. That's why I look here first. Granted, this is a new axle here. So the tag is in fairly good condition, but we can see on here GAWR, gross axle weight rating, 3,500 pounds. So I know this is a 3,500 pound axle. So if you do have an axle tag and there isn't a capacity listed on there, there may be a serial number, an axle number and in which case you could actually reach out to the axle manufacturer with this information and they should be able to give you the capacity. Some of the more common axle manufacturers on the market are Dexter and Lippert. So if you don't have an axle tag, that's okay. There is still other options to determine the capacity. One would be to take a fabric tape measure and record these circumference of your axle tube. Now, once we have the circumference, we can use the appropriate formula to get the diameter. And then using the diameter, there's a general axle guidelines to determine capacity based on that diameter. So for example, a 3,500 pound axle is gonna have a 2-3/8 inch diameter beam. Now a three inch diameter beam would represent anywhere from a 5,200 pound to a 7,000 pound axle. And there's also some larger ones, as well as some smaller ones. So if we don't have that axle tag there, we could just measure the diameter here of our axle tube. And another way is to actually look at the brake knob and flange bolts. Now, this is just going to give you a rough ballpark. The 3,500 pound assemblies, they usually use this four bolt pattern where it's the larger 52 to 7,000 pounds use that five bolt pattern. So that's more of a general guideline. It's certainly not all you wanna do, but it will help you reaffirm when you're measuring. So once we get to capacity, there's two more things that we need to gather. The next one is going to be the hub face length. So the hub face length is gonna take our brake hubs into consideration. We're gonna be measuring from the part of the brake hub where our wheel mounts from one side to the other. So we'll go ahead and do that now. Now once we have our hub face length, we need to determine our spring center length. So the spring center length is gonna be from the center of the leaf spring perch from one side to the other. So once we have all this information we can then use that to select the correct replacement axle for our trailer. Now keep in mind, there are standards in regards to the capacity, the spring center length and the hub face length, but that doesn't always mean that there's gonna be an option for your particular measurements. We do carry some common ones here at etrailer, but we don't have every possible option. So if you have one of those oddball axles that don't match up to some of our selection, you will need to have a custom ordered axle. So now that we have the correct axle selected for our trailer here, we'll go ahead and show you how to get it installed. So the first step of our installation today, we do need to lift our trailer up in the air. So make sure you're parking on a nice flat level ground. Go ahead and take some jack stands there, place them in each of the four corners on the trailer and you just have to lift it enough to let the axles spin and our wheels hang freely. But once we do that, we can go ahead and start removing the wheels. Now, this is a tandem axle trailer here and we're gonna be replacing both axles, but I'm only gonna start with one. So go ahead and get the wheel off on one side. I'll jump over to the other side, remove that well as well. So next we need to remove our hub assembly. And the first step of that is to remove the grease cap. This could vary a little bit depending on if you have an easy hook fitting or you just have these standard hubs there. But regardless, there's a couple different ways to do this. Now we're gonna be replacing this. So I'm not really too worried about damaging it. I'm gonna first start with some vice grips here. I'm just gonna clamp around the outside of the grease cap and I'm just gonna rotate it and pull it off. Or we could take a flathead screwdriver there and get it between the two surfaces there on the hub and the grease seal, and just sort of hammer it away. So go ahead and use one of those two methods to remove the grease cap. So once we have the grease cap removed, I went ahead and wiped away some of the grease so we could see what we're doing a little bit. So there's gonna be a cotter pin here holding on our castle nut that we need to remove. So I'm gonna go ahead and bend the legs back and get them started here with a flathead and I'll switch over to some needle noses. Just go ahead and bend them as straight as you can. It does get messy here and it can be hard to see what you're doing But there's gonna be two little legs there on that cotter pins. So go ahead and bend them as straight as you can. And then we're just gonna pull up and out there on the top. That's our cotter pin there. Once we have that out, we can go ahead and turn that castle up, just like so. So granted not all hub assemblies are gonna have the same retention system. This is a pretty common design. There's some other ones that use some retainer clips, but the standard practice is pretty much the same there for a few small differences, but regardless we need to go ahead and get that castle nut off. So once we have our castle nut off we can go ahead and remove our hub assembly. Now yours may or may not slide right off. We're gonna go ahead and give it a tug here. And ours is actually coming off pretty easy. There is a washer there that's gonna come out so you can hold that and then it'll just slide off like so. So now we need to remove our braking assemblies. Now the process for this could vary a little bit depending on what size brakes you have, but usually there's gonna be a couple studs here running through the backside with some nuts we need to remove. This one here is a 3,500 pound axle for reference and it uses four studs there. The larger ones use more studs. So just go ahead and remove all the nuts and bolts securing these to the axle. And once we have our hardware removed, we'll go ahead and slide our braking assembly off. We're gonna go ahead and cut our wire here, holding it on. So there's the two wires going to the other side. I'm just gonna go ahead and cut them right here for now. Now I'm gonna go ahead and take some penetrating oil. I'm gonna spray down the nuts that go to our U-bolts and I'm gonna let that sit a while. And while I let that sit, I'm gonna go ahead and remove the other side. So we're gonna take the hub assembly off as well as the braking assembly from the other side of our axle. So now we can go ahead and remove the nuts holding our U-bolts to the leaf springs here. So in order to do this, you're probably gonna need a half inch drive socket and possibly a breaker bar as well depending on how seized up these are, but go ahead and take what tools you do have to remove our nuts here. So there's usually four nuts attaching our two U-bolts. So those broke free, pretty good. Weren't too much of a hassle there, thankfully. But again, that's what our breaker bar was for. If they fight you too much, just switch over to this and we can get them out a lot easier. So we got pretty lucky here and our U-bolts weren't too seized up. I could actually break them free with that half inch breaker bar and they're threading off pretty smoothly. So I think we're good there, I'm just gonna continue to do that. So I removed both of them. Now, if yours are seized up and they're really hard to turn, that's a lot of the times the case for these U-bolts here, you can actually take a cutoff wheel such as one you see here and just go ahead and cut the U-bolts. Your axle doesn't come with U-bolts but I definitely recommend replacing those along with your axle. They're pretty cost effective and you really don't wanna be reusing the old U-bolts. So now that we have them all broke free, I'm gonna go ahead and remove the rest of them now. So now that we have our axle free on both ends here, we can go ahead and remove it from the trailer here so we can pull out and pivot down depending on how much space you have to work with. So if you have an extra set of hands that's gonna help with this as well. Go ahead and take our new axle here and go ahead and set it into position onto our leaf springs. Line up the hole in the leaf spring perch with the knob on the top of your leaf springs. This is gonna keep the axle from shifting. So now we're gonna be securing our axle to our lease springs using a U-bolt kit. We offer plenty of different options for these here at etrailer. They do not come with your axle and they are specific to the axle diameter. So this one is 2-3/8. Therefore we're using the 2-3/8 inch U-bolts but we do have options for larger and smaller axles as well. So make sure you pick up a U-bolt kit here from etrailer along with your axle. And now we'll just go ahead and take a U-bolt here, slip it over this side of the leaf spring. We'll take another U-bolt and slip it over the other side, just like so. Now we will take our tie down plate here, line up your U-bolts with the holes in the tie down plate and then we'll secure it with the provided hardware. Got each of our nuts started here. I'm gonna come back with my impact to just snug them all up. Now, keep in mind when you're tightening these down, you wanna make sure you're doing so as evenly as possible. So you wanna tighten a couple on this side then switch over to the other side and do that same thing for the other U-bolt as well. Now we'll come back with our torque wrench here and torque all of our nuts down to the specifications listed from the manufacturer. This is gonna be an industry standard based on the size of the U-bolts. Now, again, we need to alternate back and forth when tightening. So now that we have our U-bolts tightened down, we can go ahead and reinstall our braking assemblies as well as our hub/drum. So now all that's left is we're gonna have a couple wires from our braking assembly. We'll just simply hook those up to the two wires coming from our axle tube there. You're gonna have that same thing on the other side but the other side is likely gonna have a jumper that runs up to the front of the trailer. And that's gonna do it today for our look at the line of trailer axle beams with easy grease spindles..


Customer Reviews

Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs - e63GR

Average Customer Rating:  4.8 out of 5 stars   (49 Customer Reviews)

Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

by:

Got 3 5200 lb axles pretty fast love the price love the quality all of them come with brake flange and they come prewire inside pipe for brakes also the crown nut is included better deal cannot be found
Highly recommend them




by:

Good quality, fast shipping




by:




by:




by:




by:

Review from a similar etrailer Axle Beam in Trailer Axles


I could not find the exact axle for my 2006 Carryall tandem axle trailer. This one was a perfect fit between spring perches but increased the distance between wheels by one inch. Also had to use a wheel seal with a larger ID. This was not a problem at all. I will be replacing the front axle shortly. The originals had a rust issue where the spring gripes (u-bolts) hold the axle. Well built product!




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Exactly as described. I had to relocate the exit holes for the brake wires as they were too close to springs.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Installed on a customer's trailer, just replaced it with another from etrailer after the customer bent it.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


2nd set of the wrong stlye axles received to find out etrailer didn't have those same dimension of old axle in stock!




by:

Review from a similar etrailer Axle Beam in Trailer Axles


quick delivery,easy install exact dimensions as described. assembled very easily with new dexter hubs previously ordered.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Never changed an axle before, but everything went fine with these parts. Seems to be holding up to my very limited use.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Perfect fit less than hour to install




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Number one quality parts. Had to replace the axle due to lack of lubrication of the wheel bearings. Love the concept and ease of keeping the wheel bearings supplied with fresh grease on the e-z lube axles.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


item was accurate in description and the BEST service. if anyone needs parts,these are the people to contact.thank you for your help.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Received exactly when expected. I realize they where odd shaped items but I think they could’ve been packaged a little better than plastic wrap. The rubber boot over the spindle was a great touch but the flange bolts were unprotected. Other than packaging I was very pleased with my order and they bolted right up.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Fixed my tire wear problems!




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Fast and easy with good pricing




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Great axle at a great price




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Direct fit easy to install couple hours on the road again




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Everything was good




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Bolted right in. great fit. Shipped fas t.




by:

Review from a similar etrailer Axle Beam in Trailer Axles


Just glad it was in stock




by:

Review from a similar etrailer Axle Beam in Trailer Axles





by:

Review from a similar etrailer Axle Beam in Trailer Axles





by:

Review from a similar etrailer Axle Beam in Trailer Axles




25
49
Show More Reviews

See what our Experts say about this etrailer Trailer Axles



  • Is There a Hub Conversion Kit for Mobile Home Axle to Accept Standard Wheels/Tires
    I might have an option for you but mobile home axles are a one-time only use part and there aren't any hub conversion kits available for them to use standard wheels/tires that I am aware of. If you need the trailer mobile again you'll have to replace the axles with modern ones that allow for standard wheels/tires. I have created a great video for you to assist with this and then you can use the attached selection or our axles and wheels/tires to setup the trailer for use again. The Trailer...
    view full answer...
  • Recommended 95" Long 5,200 Lb Trailer Axle
    The best option we have for this is the Trailer Axle Beam with Easy Grease Spindles part # e63GR which has a 5,200 lb capacity, 95" hub face length, and 80" spring center length. If you need a different spring center length you can easily cut the old ones off and weld on part # TRSS300.
    view full answer...
  • Recommend Trailer Axle Replacement For A 1988 20 Foot Trailer
    When it comes to replacing the axle on your 1988 20 foot trailer, we currently do not have a 4,500 pound axle replacement. We do have the next size up in a 5,200 pound axle that would work if you meet some measurement requirements. We would need to know the hub face to hub face dimension and would also need to know the spring center to spring center measurement. We currently have 3 different sizes: The Dexter Trailer Axle Beam 86-1/2 inches # 8327816 The Dexter Trailer Axle Beam 89...
    view full answer...
    Image 1 for
  • Replacement 5,200 Pound Axle for Forest River Enclosed Trailer
    For a 95" 5,200 lb replacement axle you can use the # e63GR. None of our axles match that spring seat measurement so you will need to cut off the spring seats and weld on # TRSS300 to match your current measurement. If you meant a 4" drop spindle when you said "with 4," the only replacement option for the same length axle would be a 3,500 lb axle like the # 7685269. This would again need new spring seats # TRSS238. If you're set on 5,200 lbs and need the 4" drop you could use the Timbren...
    view full answer...
  • What Hubs Would Work With The etrailer Axle # e63GR
    The Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 pounds # e63GR has an inner bearing # 25580 and the outer bearing # 15123 will have a 6 by 5-1/2 bolt pattern. The Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K will match up perfectly with the 5,200 to 7,000 pound axle # e63GR. The Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 pounds # e38GR has an inner bearing # L68149 and the outer...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video by:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Conner L
Installed by:
Conner L
Employee Michael B
Installed by:
Michael B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.