Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front

Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front

Item # APS6SE

lowest price pledge

Retail:$40.01

Our Price: $24.55

You Save: 39%
Trailer Leaf Spring Suspension

Orders above $99 qualify for Free Shipping

Shipping Weight: 19 lbs

Quantity: 
In Stock, Ships Today
APS6SE - Hangers,Suspension Kits etrailer Spring Mounting Hardware
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Hangers
  • Suspension Kits
  • Spring Mounting Hardware
  • Slipper Springs - 2 Inch
  • Single Axle
  • etrailer
Kit includes 3-3/4" tall front hangers, 5-1/6" tall rear hangers and hardware for mounting 2" springs to your 2,000-lb to 8,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately. Lowest Prices for the best trailer leaf spring suspension from etrailer. Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front part number APS6SE can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (2)
  • Q & A (6)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Trailer Leaf Spring Suspension - APS6SE

Kit includes 3-3/4" tall front hangers, 5-1/6" tall rear hangers and hardware for mounting 2" springs to your 2,000-lb to 8,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.


Features:

  • Attaches 2 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4-3/4" or 5" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (2) 3-3/4" Tall front hangers
    • (2) 5-1/6" Tall rear hangers
    • (4) 3-1/2" Long x 9/16" diameter shackle bolts
    • (4) 9/16" Diameter locknuts
  • Designed for use on trailers with single, 2,000-lb to 8,000-lb axles
  • Does not include components for mounting axle to springs



Hanger Locations for Single Axle

Leaf SpringsA - Distance Between HangersB - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-230275 (803T3)
SP-232275 (1203T3)
SP-285275 (1403T3)
25"4-3/4"3"
(typical 5,200-lb to 7,200-lb trailer axle)
SP-160275 (E5226)26"5"3"
(typical 5,200-lb to 7,200-lb trailer axle)
SP-161275 (E5115)28"5"3"
(typical 5,200-lb to 7,200-lb trailer axle)

Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.



TSW-S8 Single Axle Hanger Kit - 1.75" or 2" Slipper Springs - 2,000 lbs to 8,000 lbs

Replaces APS6SE







Video of Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Suspension - Leaf Spring Suspension - APS6SE Review

Speaker 1: Today we're going to take a look at the single axle trailer hanger kit for two inch Slipper springs. This kit here will allow you to attach two Slipper or Lee springs to your trailer frame. Now, the Lee springs we do sell separately on our website. Now, on the product page of this part number there is a table that'll help you determine the hanger location based on your type of Lee springs you have.This part will include everything shown here on the table. Two of the five and quarter inch tall rear hangers, two of the three and three quarter inch tall front hangers, for of the three and a half inch long by nine sixteenths diameter shackle bolts, and four of the nine sixteenths diameter lock nuts.Now this part is designed for use on trailers with single 50200 pound to 70200 pound axles. Now it does not include the components for mounting the axle to the springs, and this part here, these hangers will achieve either a four and three quarter inch, or five inch clearance between your trailer frame and axle, depending on the axle size you use.But that should do it for the review on the single axle trailer hanger kit for two inch Slipper springs..


Customer Reviews

Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front - APS6SE

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Kit includes 3-3/4" tall front hangers, 5-1/6" tall rear hangers and hardware for mounting 2" springs to your 2,000-lb to 8,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.

- APS6SE
by:

Purchased eight leaf slipper springs for a logging trailer I am building great quality also got u bolt and hanger kit great prices and heavy duty also fenders very impressed with everything great service and fast shipping I will recommend etrailer to all 307165



- APS6SE
by:

Very pleased with the parts. Everything was exactly as described. 184772


2
2

Ask the Experts about this etrailer Trailer Leaf Spring Suspension

Do you have a question about this Trailer Leaf Spring Suspension?


  • Bolts Needed To Install Slipper Springs
  • For the spring eye you would use the Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long # 166079, but slipper springs don't have the second spring eye, so a bolt is not used on the back end. You can also use a wet bolt like # 126B2, for less friction. The Shackle Bolt with Locknut for Double-Eye Springs - 3" Long # 166081 are for use with the spring and shackle straps used with a shackle straps on a tandem setup with an equalizer but it could be used for the springs and the...
    view full answer...

  • How Does the Single-Axle Trailer Hanger Kit #APS6SE Work with 1.75 Inch Slipper Springs
  • To assemble a slipper spring suspension system, you'll need several components: the hangers and bolts (included in the kit APS6SE); slipper springs, such as the 1.75 inch # SP-264275; spring seats such as # TRSS300; and a U-bolt mounting kit such as # # APUBR-8. The 1.75 inch springs attach the same as 2 inch springs would. The hangers attach the springs to your trailer frame. The U-bolt plates attach the springs to the axle. The spring seat welds onto your axle to provide additional...
    view full answer...

  • Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SE
  • The front hangers in kit # APS6SE are # 721584. They measure 3-3/4 inches from the top to the center of the mounting hole. The hole is 9/16 inches in diameter. The holes that are in the top are not for bolting the hanger. They are there to mount the hangers using button welds. Very few hangers are designed to be bolted on. The rear hangers in the kit are # 721585. They measure 5-1/6 inches tall from the top to the center of the 9/16 inch diameter hole. It also features the 2 holes for...
    view full answer...

  • Upgrading Tire Size and Suspension on a Homemade Hovercraft Trailer
  • The wheels that are currently on your tires are 3-3/4 inches wide, but the width of the actual tire (section width) will be greater. The section width of your 4.80/4.00-8 tires is 4.6 inches. Moving up to a 6 inch wide, 10 inch diameter wheel like the Kenda 205/65-10 Tire and Wheel Combo 4 on 4 Bolt Pattern, # AM3H460, will have a section width of 8.07 inches. This will bring the tire approximately 1-3/4 inches closer to the trailer frame leaving a 1-3/4 inch gap. This will be plenty...
    view full answer...

  • Tandem Axle Hanger Kit for 2 inch Wide Slipper Springs
  • Yes, you can mount two 6,000 lb capacity axles that use slipper springs in tandem on your trailer. What you'll need is a tandem axle slipper spring hanger kit like the part # APT6SE which is designed for 2 inch wide springs like what you have. What equalizers do is prevents any of your axles from ever carrying the full weight of the trailer at any time like over a bump. The weight is always "equalized" between the two axles.
    view full answer...

  • Axle Recommendation for a Trailer for Best Ground Clearance
  • Actually if you are looking for the best possible ground clearance for your trailer a Timbren Axleless system with a lift built into it like the part # ASR3500S06 would be your best option. Not only will there not be an axle running down the middle of your trailer which would limit ground clearance, but the spindles have a lift built into them to give even more ground clearance than a standard axle or torsion axle. This system has a 3,500 lb capacity as well.
    view full answer...


Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Lindsey S
Updated by:
Alexander C
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.