Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
(24 reviews)
Price: $3.15
In Stock
Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
Item # 93003-3X
Retail:$3.40
Our Price: $3.15
You Save: 7%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (24)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Leaf Spring Suspension - 93003-3X
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 1-1/4 Inch Tall
- Single Axle
- 9/16 Inch Diameter
- etrailer
Rear hanger welds to your trailer's frame and using shackle straps (sold separately) suspends double-eye leaf spring on single-axle trailer suspension systems only.
Features:
- Configured as rear hanger
- Provides attachment point for leaf spring
- Hanger welds to your trailer's frame and suspends spring using shackle straps (sold separately)
- Made for use with single-axle systems only
- Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes
- Works with 9/16" diameter bolt (sold separately)
Specs:
- Overall dimensions: 2-3/8" tall x 3" deep
- Inner width: 1-7/32"
- Height (from top of hanger to center of bolt hole): 1-9/32"
TSW 93003-3X Rear Hanger for Double Eye Springs - Single Axle Only - 1-1/4" Tall - 9/16" Bolt Hole
Replaces 93003-3X
Video of Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Trailer Suspension - Leaf Spring Suspension - 93003-3X Review
Today we're going to be taking a look at the rear hanger for double-eye springs. This hanger provides the attachment point for a leaf spring. The hanger suspends the spring from the trailer frame using shackle straps. Shackle straps are sold separately. Basically the way this would work this would get welded to the frame of the trailer and you don't actually connect your spring directly to this hanger. Shackle straps would need to be used on each side just like this.
They line up with these holes. They mount with hardware, if not included needs to be provided separately. Then your spring would actually mount here at the shackle straps. This is configured for use as a rear hanger. Now, if you're in need of any hardware or a front hanger or shackle straps, you can find all of that stuff at etrailer.com. One hanger is included.
It's made from a steel construction with a raw finish. This is designed to be welded to the trailer. You will notice two holes at the top of the hanger. These holes are not for a bolt-on installation. These are actually there if the installer wants to do a button weld instead of or in addition to welding the outside of the hanger. This hanger's gonna offer a height of an inch and a quarter.
That measurement's taken from the center of the mount hole to the top of the hanger. If we do that you can see that that measures right on an inch and a quarter. It is designed to fit 1 3/4 inch wide double-eye springs with 9/16 inch diameter eyes and again you will need to use shackle straps. It's gonna work with a 9/16 inch diameter bolt. That's sold separately as well.
Overall length measurement from edge to edge is gonna measure 3 inches. External width about 1 7/8. Internal width is going to be about 1 7/16 of an inch. Overall height, very top to very bottom is going to be about 2 1/4 inches. Then all the holes on this unit are going to have a diameter of 9/16 of an inch. That's gonna do it for today's look at the rear hanger for double-eye springs.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only - 93003-3X
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
Rear hanger welds to your trailer's frame and using shackle straps (sold separately) suspends double-eye leaf spring on single-axle trailer suspension systems only.
by: Bruce K02/09/2017
As usual, etrailer does the job and faaast shipping!!!
I will use these spring brackets to move my trailer axles forward and reduce tongue weight.
by: Lisa07/01/2018
These were the perfect replacement parts for my very rusty and compromised hangers. I was given a utility trailer which ended up needing a total overhaul. I am extremely grateful foe etrailer having all the parts I needed.
by: Paul 01/06/2023
Fast shipping. The right parts. All goo d!
by: ABC03/08/2017
I will use these spring brackets for restoration of my cargo trailers. This product is exactly what I needed and well constructed.
by: Kelvin 09/23/2022
Great product and exactly what I needed. Was very pleased with the shipping time, had within two days.
by: Mike10/12/2017
Excellent product and excellent service.
Five star company. .
I'll be back for all my trailer needs.
by: Andrew05/28/2019
Product worked perfect used for repairing boat trailer
by: Fred02/20/2021
Covid hit - project on hold
Hangers are heavy duty, just what I was looking for. Not easily available in Canada.
by: James11/30/2021
Just what I needed, friendly service, and efficient order handling and alteration, Good communication on order status !
by: Mark B06/12/2020
all worked as promised and good quality
by: Lucas 06/02/2020
Just what I needed and shipped just fin e.
by: Mark05/20/2018
Product is excellent.
by: Seth 04/13/2021
Worked as expected.
by: ben c12/27/2016
I ordered the wrong ones but they are g reat
by: David 06/17/2021
They look good
by: James 07/11/2023
by: Robert 07/24/2023
by: Stephen 03/03/2023
by: Ernie10/07/2022
by: 04/30/2021
thanks guys
by: Victor 04/07/2023
by: Helen 06/16/2023
by: Ed01/22/2023
24
24
See what our Experts say about this etrailer Trailer Leaf Spring Suspension
- Trailer Suspension Hanger 115917 is Too Wide to Use with Shackle StrapsHanger # 115917 can function as a rear hanger for a tandem or triple axle set up but it is too wide to be used as a rear hanger in a single axle application. Since you already have them you could use washers to equal out the width between the hanger and the spring. Or you could go with hanger # 93003-3X which is more narrow and thus would be a proper fit without washers.
view full answer... - How is the Height Measured on Trailer Suspension Hanger 93003-3XThe measurement on hanger # 93003-3X is 1-1/4 inches measured from the top of the hanger to the center of the hole the spring hangs from.
view full answer...
- Availability of 1-1/8 Inch Tall Rear Hanger For 1-3/4 Inch Wide Trailer Leaf SpringsThe # 93003-3X rear hanger measures just over 1-1/4 inch in height (measured from the center of the bolt hole to the top of the hanger) at 1-9/32 in height which is absolutely close enough to the 1-1/8 inch height you were looking for that the articulation of the suspension will make up for that miniscule height difference.
view full answer... - Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3The APS1, APS2, and APS3 are all suspension kits for single-axle trailers with 1-3/4-inch double-eye springs. They are designed for use on trailers with single, 2,000-lb to 7,000-lb axles. The difference in the kits are in the rear hangers and the shackle straps. The Redline Single-Axle Trailer Hanger Kit, part # APS1, uses the Redline Rear Hanger, part # 30-20, which uses a steel bushing and is .91 inches tall. The shackle straps are the Shackle Strap, part # TRSL313, which are 3-1/8...
view full answer... - Parts Needed To Replace Slipper Spring With Double Eye Leaf Springs On a 2002 Coleman Mesa 3651As we will not have a slipper spring that fits your 2002 Coleman Mesa 3651 I recommend upgrading to a double eye leaf spring system. You will only need to change your Rear Hanger # 93003-3X on each side to be able to install 2 of the 4-Leaf Double-Eye Springs # e54SR. The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 will give you the necessary new hardware to mount the springs to the frame. I recommend upgrading to the Wet Bolt Kit # K71-358-00 to cut down on noise and provide...
view full answer... - What are the Proper Components Needed to Install the Leaf springs On a TrailerBuilding a single axle trailer you will need the following items to install leaf springs. I have listed the part numbers for the PR626 Springs next to the items needed. 2 Springs - # e27SR 2 Front Hangers - # 115917, 1-1/2 inch tall or # 28-5, 3-1/4 inches tall 2 Rear Hangers - # 30-20, with 1-1/2 inch or # 93003-3x, with 3-1/4 inch 4 Shackle Straps - # TRSL313 6 Shackle Bolts and Nuts - # 166081 These components are available in the following Kits. Single Axle Trailer Hanger Kit 1-1/2...
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Wilson B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.