Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rear hanger works with trailer suspension systems that have 2" slipper springs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 5-1/6" tall rear hanger for 2" wide slipper springs. This rear hanger will work with a trailer suspension system that has 2" wide slipper springs. This is configured as a rear hanger. This is designed to suspend the spring from the trailer frame by providing a resting place for the slipper end of the spring. It is designed to work with a 9/16 diameter bolt. We do sell that separate on our website. It's part number 166079.
Happened to pull that part number. There's your bolt and the nut that's included. Basically that would just go through the hole right down here, come through the other side and you put your nut on there and tighten it down. Now this is designed for trailers with 3,500-pound to 9,000-pound axles. The height they give on this for the rear hanger is 5-1/6". That measurement is from the center of the hole to the top.
If we take our ruler, go center to the top, that will get you your 5-1/6 measurement. That should do it for the review on the 5-1/6" tall rear hanger for 2" wide slipper springs.
Average Customer Rating: 4.8 out of 5 stars (28 Customer Reviews)
Rear hanger works with trailer suspension systems that have 2" slipper springs.
Great product fits my need perfectly. The previous owner had bent the frame and bracket. I liked that this product has welded support in the center. With the extra support welded in the bracket and with me not planning on overloading the trailer as the previous owner had done to cause the damage, I feel this will be a permanent fix
Wish you would give measurements of the part in detail.
Jared
4/26/2023
Width, I bought the Bolt which was recomended by the website that said others who bought this bracket also bought this bolt. Well the bolt was definatly not for the bracket.
good product good follow through
excellent product
The welds on these hanger slipper rub rails were terrible. Low penetration and total loss of the shield gas on one long weld. Note the hanger in the picture and video on eTrailer web site has the weld on the wrong side of the rub rail; but my 2 came in with the weld on the correct side. I'll need to re-weld all however due to total lack of quality control. Shipping packing was terrible and half of these hangers were outside the box.
Great buying experience. Jaime was very helpful
Thanks did receive the hanger should work fine. Thanks
Very fast shipping. Exactly what I needed. I have a old Redi Haul tilt bed that I use as a utility trailer. Need to move the axle back about a foot.
I ordered these hangers from parts store and they kept saying each day they aren't in yet. I waited almost two weeks still not here..!
I order from etrailer.com on Tues about 3;30 pm and the parts were at my front door by 1;00 pm on Thursday . Excellent service!
This solved my problem with larger size tires. Heavy Duty.
Item is as expected and heavy duty
Works as advertised
Very very nice thanks
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/15/2023
What measurement would have made it easier to know if this hanger would work for you?