Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
(83 reviews)
Price: $6.40
In Stock
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
Item # 115918
Retail:$7.50
Our Price: $6.40
You Save: 15%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (83)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Leaf Spring Suspension - 115918
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 2-1/2 Inch Tall
- Tandem Axle
- Triple Axle
- 9/16 Inch Diameter
- etrailer
Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.
Features:
- Configured for use as front, center, or rear hanger for double- or triple-axle applications
- Can be used as front hanger only on single-axle applications
- Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes
- Works with 9/16" diameter bolt (sold separately)
Specs:
- Overall dimensions: 3-3/16" tall x 3" deep
- Inner width: 1-7/8"
- Height (from top of hanger to center of bolt hole): 2-3/8"
TSW 5918 Front, Center, or Rear Hanger for Double Eye Springs - 2-1/2" Tall - 9/16" Bolt Hole
Replaces 115918
Video of Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Trailer Suspension - Leaf Spring Suspension - 115918 Review
Speaker 1: Today we're taking a look at a Hanger for Double Eye Springs. This is configured for use as a front, center or rear hanger for double or triple axle applications. It can be used as a front hanger only on single axle applications. It's designed to fit 1 and 3/4 inch wide double eye springs with a 9/16 inch diameter eye, so we can tell that by taking the measurement here. It's that opening measurement, so inside edge to inside edge, you see that edge as about 2 inches. Now that will narrow down to about 1 and 7/8 here at the top, so it's going to fit a 1 and 3/4 inch wide double eye spring perfectly.Again, it works with a 9/16 inch diameter bolt, bolt not included.
It's constructed from durable steel. It's a weld-on installation. Taking a look at the overall dimensions, starting with the overall height, bottom to very top, measures 3 and 3/16 inches tall. Edge to edge, this direction, is 3 inches deep. Outer edge to outer edge right here is 2 and 7/16 of an inch wide, and then the height from the top of the hanger to the center of the bolt hole right here is 2 and 3/8 inches.That's going to do it for today's look at the Hanger for Double Eye Springs..
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- etrailer mistake
Customer Reviews
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole - 115918
Average Customer Rating: 4.8 out of 5 stars (83 Customer Reviews)
Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.by: Joseph05/31/2023
I had some issues with the part missing from the box in transit. Looked like the poor package had been through the ringer. etrailer shipped another almost immediately. Incredible customer service. Will definitely be buying from them in the future!
Part works great. Seems to be really nice quality as well.
by: Dennis 11/02/2023
This is undoubtedly an excellent company to do business with the fastest shipping I have ever seen
by: Jared 05/11/2023
I always order trailer parts from trailer. Always fast shipping and you can't beat the prices.
by: Larry 09/30/2023
I got exactly what I ordered very quickly and the products are excellent. Thanks.
by: Gary 08/02/2023
I needed these hangers quickly as we had limited time to fabricate a frame to move a structure. They are well made ,1/2 the price of other vendors and were delivered in 3 days.
by: Rene 11/05/2022
And don't say this is my to go place when I'm buying parts for trailers. Very satisfied always with my product, and customer service is very helpful when I don't know what the parts that I need
by: Jose 08/04/2023
the bracket wasjust what I needed. Came very fast. hank you.
by: John 08/10/2023
Looks great, thanks!
by: Sovanna06/16/2022
Carelessly when shipped the products, didn’t protect the products with bubble wrap. Received as damages products inside the box during shipment. Called in to customer service had to wait 44 minutes.
by: Larry11/16/2017
The trailer shackle brackets worked great and are very strong. I used them to hold my trailer tail gate in the upright traveling position. Today's trailer manufactures make the connections so cheap and they don't last long. The gate will rust off before these brackets brake. I welded one on horizontal to trailer. Cut one in half so it was flat and also welded horizontal to trailer gate raised after lining the holes up for a 1/2" hitch pin. Raise gate and drop in hitch pin, simple and works great. It is an 18' utility trailer with a 5' gate using a gorilla lift system on it because of my senior age and lifting ability.
by: Christopher 03/09/2023
Thank you. Received as stated.
by: Tom W12/09/2022
Excellent product, Excellent support, Excellent customer service - Good support all around!!
by: Jimmy06/10/2022
The hanger was great for my application.
by: Randy 02/06/2023
Easy order, and it showed up quick.
by: Earl 01/22/2023
the order met my expiation and was received when said.
by: tom g.05/08/2013
I was very satisfied with the replacement hangers I purchased. They fit perfectly, were reasonably priced, and arrived in a very reasonable amount of time. I will use etrailer again for any future trailer repair I need.
thanks!
Tom G.
5/8/2014
It is still in good shape and doing great. This trailer is used for hauling in heavy round bales of hay as well as green heavy stalks of tobacco. The hangers had to be replaced because of a tractor running in to the side of the trailer. Your replacement hangers did the trick to get the trailer in running shape again.tom g.
by: Gene L10/05/2015
Great product and customer service was outstanding. I wasn't sure if the hangers would work in the application I was using them for so Jean in customer service pulled the 2 items, measured them and confirmed I was good to go.
Thanks,
by: Spring Hanger07/22/2019
I welded these to my fifth wheel and they have worked flawlessly. Thanks etrailer. God bless.
by: Kelly 09/14/2022
Everything fit just like the description. Overall great quality products
by: Luke09/16/2014
Nice heavy 3/16 steel. Has a little outward bow to it so when you tighten down your bolds it will compress a little but not bind up spring eyes or equalizer.
by: Art 02/13/2020
Look like very good quality material haven't installed as of yet but they should work perfect.
Shipped almost immediately after I ordered them and received relatively quickly, and the cost to ship was not horrible for me it is probably cheaper than the gas as I am somewhat rural and have nothing close to go purchase in person and even if I did they would not be as knowledgeable as etrailer and you probably won't get what you actually need.
by: Handyman05/28/2021
This part arrived sooner than expected. It is just what I was looking for. I have ordered items several times from etrailer and have never been disappointed.
by: TJH03/23/2019
GREAT PART WORKS WELL
JUST WISH THEY HAD THESE GALVANIZED THATS THE 4 OTHER WISE A
5 STAR
by: Pat06/16/2019
Great product, heavy made hangers, fit well on the trailer.
Would have rated higher if the shipping would have be less expensive
by: Tammy06/21/2019
Ordered for trailer. Was what he wanted. Fast delivery and easy ordering.
25
83
Show More Reviews
See what our Experts say about this etrailer Trailer Leaf Spring Suspension
- How To Choose The Correct Hanger Width For A Double Eye Leaf SpringNo, the bolts while being tightened down should not cause the hangers to bend inward towards the leaf. This will weaken the hanger and potentially cause it fail. You will need to get new hangers to match your leaf springs or new leaf springs to match your hangers. There should only be around an 1/8" or less of clearance between the leaf spring and hanger. For a 1-3/4" double eye leaf spring, you will want a hanger designed for that width of spring such as the Front/Center/Rear Hanger for...
view full answer... - Do Trailer Equalizer Heights have to be the Same to Level Trailer Leaf SpringHangers come in varying heights to accommodate equalizers that have different heights and different frame clearances but the end goal is to allow the leaf springs to sit as level as possible. The part # 115918 you referenced is the 2-1/2 inch height you are looking for but a different option might be to go with a different height equalizer. I attached a link to a page that has all of the equalizers we carry as well.
view full answer... - Can Truck with Oversize Tires Tow Fifth Wheel Trailer LevelSo ideally your trailer sits as level as possible and you have at least 6 inches between the bed rails and the overhang of the trailer. The main reason you are having a hard time with this is the oversize tires you have on your truck which is adding quite a bit of height. Going to a smaller tire will help and fix the problem. The thing to keep in mind though is that the overall diameter of a tire is split on either side of the axle center. So if you go to a tire that's 2 inches shorter...
view full answer... - Replacement Hangers for 3500 LB Tandem AxleAccording to the dimensions that you have provided, you will need the Center Hanger for Double-Eye Springs, # 115918. Since your have a tandem axle trailer, you will need to order a quantity of 6 to replace all hangers on the trailer.
view full answer... - Should There Be Clearance On The Center Hanger # 115918You will want a bit of clearance so that the spring will be able to move.If it were any tighter the spring would squeak and wear obsessively. You will not want to add a washer to the Center Hanger, part # 115918. There is clearance to allow the spring to move and so that there will not be squeaking and excessive wear on the the spring and hanger. The hanger that you are replacing more than likely has an elongated hole from wear and tear and bushings that are worn or starting to wear.
view full answer... - Where Is Measurement Taken On 1-1/2 Inch and 2 Inch Hangers In Redline Trailer Hanger Kit # APTT3 The height measurement of the hangers in the Redline Triple-Axle Trailer Hanger Kit, part # APTT3, is from the top of the hanger to the center of the bolt hole. The 1-1/2 inch tall hanger is the Redline Front/Rear Hanger for Double-Eye Springs, part # 115917 and the 2-1/2 inch tall hanger is the Redline Center Hanger for Double-Eye Springs, part # 115918. I am including a picture of the hanger and it shows where the dimension is measured.
view full answer...
- Shorter Spring Hanger for Taller Equalizer on a 2018 Forest River Wolf PackIf you don't want to buy larger equalizers then you will need to replace the center spring hanger to bring your equalizers back up to accommodate for 1-1/4". Depending on what size hangers you currently have you will want the 2-3/8" Tall Center Hanger for Double-Eye Springs 9/16" Bolt Hole item # 115918. Or the 1/4" tall Center Hanger for Double-Eye Springs item # 28-5. If those two heights don't work for you I have linked our entire selection of spring hangers below.
view full answer... - How to Choose Correct Double-Eye Leaf Springs For Keystone CougarYou may be able to get leaf springs with an extra leaf or two for your Keystone Cougar half-ton, it just depends on the leaf springs you need. While we don't have any way of knowing what specific ones you need, to find the right ones all you need to do is measure your current leaf springs from center-to-center of the spring eyes. Leaf springs also flatten a bit over time, so you should go with ones that measure a bit shorter than what you currently have. For example, based on your trailer...
view full answer... - Trailer Suspension Hangers for Dexter Heavy Duty Suspension Kit # K71-360-00There are different hangers that you could use with the Dexter heavy duty suspension kit # K71-360-00. To achieve 4-1/2 to 5 inches clearance between the trailer frame and axles you could use 6 of hanger # 28-5. To achieve 3-1/2 to 3-1/4 inches clearance you could use 4 of front/rear hangers # 115917 and 2 of center hanger # 115918 but these are usually found on lower capacity axles. These are going to be the most common set ups and should work well for you.
view full answer... - Recommended Suspension Hangers for Use with Dexter Suspension Kit K71-360-00There are different hangers that you could use with the Dexter heavy duty suspension kit # K71-360-00. To achieve 4-1/2 to 5 inches clearance between the trailer frame and axles you could use 6 of hanger # 28-5. To achieve 3-1/2 to 3-1/4 inches clearance you could use 4 of front/rear hangers # 115917 and 2 of center hanger # 115918 but these are usually found on lower capacity axles. These are going to be the most common set ups and should work well for you.
view full answer... - What Size Bolt-On Leaf Spring Hangers Are AvailableWe only have 2 options for bolt-on hangers: - CE Smith Front/Rear Hanger Bracket for Double-Eye Springs # CE14026G which have an inside width of 1-1/4" - CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs # CE14035G40 which have an inside width of 2" Typically with leaf springs that measure 1-3/4" you are using a bracket like the Front/Center/Rear Hanger for Double-Eye Springs # 115918 which has an inside width of 1-7/8" not 2". But this is a weld on option which won't...
view full answer... - New Hangers for my TrailerI've got a solution for you. Unfortunately the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - part # CE14026G you looked at aren't going to work. I measured the mounting hole on it and they are on 1 9/16" centers which means half of each hole will be covered by your trailer frame. I then checked out CE Smith Front/Center/Rear Hanger part # CE14035G40 and those hoes are on 1 5/8" canters still no good for your application. After some brainstorming I came up with two options...
view full answer...
- Replacement Suspension Components for 1970's Tandem Axle Horse TrailerWe do have replacement parts for your trailer. Starting with the equalizer we have the # TREQR89. It sounds like you have 3-1/8" shackle straps so I recommend the MORryde Suspension Upgrade Kit # MR76ZR. This comes with wet bolts, bronze bushings, and 1/2" thick shackle straps. I believe you're talking about hangers when you gave those shackle dimensions. The closest we have to your front and rear are the # 115918 which are 2-3/8" tall. The closest thing we have to 6-3/4" is the 5-7/16"...
view full answer... - Solution for 3,500 Pound 70-1/4" Long Trailer AxleI do have a solution, but custom axles are not something we make here at etrailer. What I can offer is the Timbren Axle-Less Trailer Suspension system. This fits any frame width so there is no need to have a custom length axle built for your trailer. It will also replace/upgrade your suspension. Since you're also looking for a hub with a 5 on 4-1/2 bolt pattern we have the # A35RS545 with an idler hub or the # A35RS545E with a hub/drum and electric brakes.
view full answer... - Recommend Hangers, Shackle Straps, and Bolts for Equa-Flex Cushioned Equalizers # LC279688For a center hanger you will want something that isn't too tall because equalizers # LC279688 are quite tall compared to regular equalizers. Hanger # 115918 is what I would go with. The front and rear hangers would need to be taller than the center so I recommend # E4139. Then for shackle straps I recommend # TRSL313. This should get you right about level. So you will need: 2 of hanger # 115918 4 of hanger # E4139 8 of shackle strap # TRSL313 14 of wet bolt and nut # 126B2 The Equa-Flex...
view full answer... - Tandem Axle Hanger Kit Recommendation For Car Hauler Trailer With 3,500LB Tandem AxlesThe only difference is going to be the height difference for the Hanger Kits # APT3 & # APT5. Since this is going to be for a car hauler the shorter hangers # APT3 will help to make loading low ground clearance vehicles easier since the trailer will be lower to the ground. Then you will be able to connect your two 3,500lb axles to the 4 Leaf Springs # e57SR using two U-Bolt Kits # CE23002
view full answer... - How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch SpringsThank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are based on our preassembled kits, so we will use that as a foundation for your setup. First, I would either replace all of the front and rear hangers with 2-1/2 inch tall hangers like part # 115918 or replace just the center hangers with 2-1/2...
view full answer...
- Will Taller Hangers Lift My Keystone Travel TrailerThe Hanger part # 115918 is going to lift your trailer, how much depends on the hangers that you currently have on the trailer. The difference between the height of your current hangers and these will be how much lift you get on the Keystone. We do carry taller hangers like part # E4139 that measures 4-1/4" tall. Another option for a lift is an over-under kit like part # K71-384-00 for a 2-3/8" axle or part # K71-385-00 for a 3" axle. You are basically moving the springs to on top of the...
view full answer...
- Recommended Trailer Leaf Spring MountsYou are on the right track here! I recommend welding them to the trailer this is the most common practice and will prove to be the most reliable. The 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles part # e54SR that you looked at are 1 3/4" wide with that said and looking at the photo I recommend going with the Front/Center/Rear Hanger for Double-Eye part # 115918 This has the width and bolt eye diameter you want. If you will need the bolt to connect the two together use the Zinc...
view full answer... - Could Lippert Center Point Air Bag System Work on Triple Axle Trailer with Slipper SpringsSounds like you may have slipper springs which the Lippert Components Center Point # LC1565401 that you referenced is not designed to work with. However, I believe your trailer has three 7k axles so if you wanted to convert your trailer to double eye springs you could use the springs part # e64SR. For new hangers then we have the part # 115918 which you can use on the ends and for bolts you can use the part # 126B2. For shackles then we have the # TRSL225 and you'd be set.
view full answer... - Additional Suspension Parts to Add an Axle to a Tandem Axle TrailerThe first thing I need to tell you is that mobile home axles are designed for one-time use only by the manufacturers. Because of this replacement parts are nearly impossible to find. I would urge you to switch to regular axles so replacement parts are readily available. I have linked the axles we carry for you. The main problem you might run into when adding another axle is wheel scrubbing. When making turns its likely that the front axle tires will drag on the ground. Also to maintain...
view full answer... - Replacement Hangers, Equalizers, Shackle Straps and Hardware For a Trailer with 5-5/8" EqualizerYou will need the following parts as we do not have everything you need in one kit. Front/Rear Hanger # 115918 Qty 4 Center Hanger # 28-5 Qty 2 Curved Equalizer # TREQ104 Qty 2 Shackle Strap # CE14103G Qty 8 Zinc Shackle Bolt with Locknut # TRFA73Z916DLNZ Qty 14 You can swap the hardware for the Wet Equalizer Bolt # 126B2 if you wish to have a greased set of bolts that allow the suspension to move more freely. You will need to replace the nylon bushings in your springs and equalizer...
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Expert Research:
Reno H
Expert Research:
Jameson C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
6/20/2022
I am very sorry to hear that the order arrived damaged and that it had taken longer then we like to reach us. It is our busy season and we are working to respond to all calls and emails as quickly as possible.