1. Trailer Leaf Spring Suspension
  2. Redline
  3. Hangers
  4. Suspension Kits
  5. Spring Mounting Hardware
  6. Slipper Springs - 2 Inch
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Item # AP216-H202
lowest price pledge
Retail:$154.43
Our Price: $134.77
You Save: $19.66
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 37 lbs
Quantity: 
In Stock
Redline Trailer Leaf Spring Suspension - AP216-H202
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Leaf-spring mounting kit includes 4-1/2" tall front hangers, 3-1/2" tall center hangers, 5-1/4" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately. Lowest Prices for the best trailer leaf spring suspension from Redline. Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers part number AP216-H202 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (5)
  • Photos
  • Why etrailer?

Redline Trailer Leaf Spring Suspension - AP216-H202

  • Hangers
  • Suspension Kits
  • Spring Mounting Hardware
  • Slipper Springs - 2 Inch
  • Tandem Axle
  • Redline

Leaf-spring mounting kit includes 4-1/2" tall front hangers, 3-1/2" tall center hangers, 5-1/4" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 4 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 5" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (2) 4-1/2" Tall front hangers (28-1)
    • (2) 3-1/2" Tall center hangers (29-1)
    • (2) 5-1/4" Tall rear hangers (30-28)
    • (2) 13-1/8" Long straight equalizers (13-44)
      • 7/8" Diameter center hole for mounting to hanger
      • 9/16" Diameter side hole for attaching to spring
    • (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7)
    • (4) 5/16" Diameter locknuts (6-11)
    • (4) 3-1/2" Long x 9/16" diameter shackle bolts (91635B)
    • (4) 9/16" Diameter locknuts (916DLN)
    • (2) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1)
    • (2) 7/8" Diameter locknuts for 7-1-1 (6-111)
  • Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles
  • Does not include components for mounting axle to springs


Hanger Locations for Tandem Axle

Leaf SpringsA - Distance Between Front and Center HangersB - Distance Between Center and Rear HangersC - Distance Between U-BoltsD - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-230275 (803T3)
SP-232275 (1203T3)
SP-285275 (1403T3)
30-1/2"30-1/2"36"5"3"
(typical 5,200-lb to 7,200-lb trailer axle)
SP-160275 (E5226)31-1/2"31-1/2"37"5"3"
(typical 5,200-lb to 7,200-lb trailer axle)
SP-161275 (E5115)33-3/4"33-3/4"39"5"3"
(typical 5,200-lb to 7,200-lb trailer axle)


AP216 and H202 Tandem Axle Hanger Kit - 2" Slipper Springs - 3,500 lbs to 8,000 lbs






Customer Reviews

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers - AP216-H202

Average Customer Rating:  4.7 out of 5 stars   (3 Customer Reviews)

Leaf-spring mounting kit includes 4-1/2" tall front hangers, 3-1/2" tall center hangers, 5-1/4" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.

- AP216-H202
by:

Springs and hangers fit as they should. Easy install and everything is working as designed. Thanks for the quality parts at affordable prices. 652025



- AP216-H202
by:

Minor modifications needed to fit on ancient trailer, but products were a good investment in the restoration on an old horse trailer. 602846



- AP216-H202
by:

Good product. Doing a great job for me so far. I used the kit to upgrade our toy-hauler from 1.75” to 2” leaf springs. 575480


3
3

Ask the Experts about this Redline Trailer Leaf Spring Suspension

  • Using Hanger Replacement Kit # AP216-H202 to Replace Similar Kit with Shorter Front Hangers
    The Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs # AP216-H202 has all of the components at the proper dimensions to allow it to have the suspension sit as level as possible and perform at it's best. This kit will function well to replace what you have. Most likely your current front hangers are not ideal and this kit would allow your suspension to perform just as well if not better.
    view full answer...
  • Recommended Slipper Spring Suspension for 10,000 Pound Trailer
    For Slipper Springs to install on your trailer that will have a maximum load of around 10,000 pounds, I recommend either the 5-Leaf Slipper Spring w/ Hook End for 6,000 pound Axles # SP-160275 or the 4-Leaf Slipper Spring for 5,000 Pound Axles # SP-231275, depending on the actual axle capacity for your trailer. Then for a hanger kit, which will work for either of the Slipper Springs mentioned above, I recommend the Tandem-Axle Trailer Hanger Kit for 2 Inch Slipper Springs # AP216-H202....
    view full answer...
  • Spring Hanger Spacing Dimensions for a Tandem Axle Slipper Spring Suspension on a 14,0000 lb Trailer
    The hanger spacing for a tandem axle trailer suspension setup can be determined, but you need to take into account the axle spacing needed for the overall diameter of your wheel and tire combination and the springs you will be using. Lets say that you plan on using 4 of the 5-Leaf Slipper Springs, # SP-232275, for 7,000-lb Trailer Axles, and that your wheel and tire combinations are the Karrier ST235/85R16 Wheel and Tire, # AM32764. The AM32764 wheel and tires overall diameter is...
    view full answer...
  • How to Determine Hanger Spacing on a Tandem Axle Trailer with 6K Axles and Slipper Spring Suspension
    The hanger spacing is going to depend on a few things including the spring measurements and the equalizers being used. But if you were using spring # SP-160275 the distance between the hangers would be around 29-3/4 inches. However this is using hanger kit # AP202-H202 with 10-1/8 inch equalizers. If you were using kit # AP216-H202 the hanger spacing guideline would be 31-1/2 inches because the equalizers are longer. So you can see that it changes depending on the components being used. Also,...
    view full answer...
  • Why Do Some Slipper Spring Hangers have a Bar Across the Middle and Others Do Not
    A slipper spring hanger that doesn't have the bar that goes across would generally be for the end of a slipper spring that has the eye. Hangers that do have that bar are generally for the slipper end. And in some cases you would use a bolt through a hanger if that hanger needed to be used on the slipper end. If you look at the suspension kits, such as # AP216-H202 as an example, some of them have a mix and some have all of one type.
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Updated by:
Rachael H
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.