bing tracking image
  1. Trailer Leaf Spring Suspension
  2. Redline
  3. U-Bolts
  4. Camper
  5. Car Hauler
  6. Utility Trailer
Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter

Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter

Our Price: $9.70
Trailer Leaf Spring Suspension
Shipping Weight: 0.74 lbs
Add to cart
Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter 5-1/2 Inch Long 176400
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This 5-1/2" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Bolt has an inner width of 2-3/8". 2 Nuts included. Great Prices for the best trailer leaf spring suspension from Redline. Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter part number 176400 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (51)
  • Q & A (0)
  • Videos (2)
  • Photos

Redline Trailer Leaf Spring Suspension

  • U-Bolts
  • Camper
  • Car Hauler
  • Utility Trailer
  • Round Axle - 2-3/8 Inch
  • 5-1/2 Inch Long
  • 3500 lbs
  • 1/2 Inch Diameter
  • Redline

This 5-1/2" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Bolt has an inner width of 2-3/8". 2 Nuts included.


  • Replacement U-bolt acts as part of a trailer suspension system
    • Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame
  • Round bolt fits round trailer axles
  • 1 U-bolt and 2 nuts included


  • Application: 2-3/8" diameter axles
  • Inner width: 2-3/8"
  • Length: 5-1/2"
  • Bolt size: 1/2"-20

U-Bolt Diagram

176400 Redline U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter - 5-1/2" Long

Item # 176400

Video of Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for 3 Inch Round Trailer U-Bolts Installation

Hi there trailer owners. Today we're gonna be taking a look at red lines line of replacement U bolts. Round U bolts are commonly used to hold your leaf spring stack onto your axle. And if you're making any repairs to your trailer it's possible that the threads can get damaged where you can't reuse the U bolt. You might have to replace them in that instance, or if you had some sort of blowout or any other kind of damage where you might've had some damage that caused some issues with your U bolts here you may need to replace those as well. Over time if you've constantly taken these off they do stretch out over time.

So it is a good idea to replace them. If you've had several repairs done and remove them. The ones that redline have, offer slightly longer length. So that way you can ensure it's going to be a fit for your trailer. We also recommend these.

If you're gonna be adding accessories to your trailer and you need the additional length if that accessory goes under a U bolt we can see our factory U bolt here on the trailer We we're just working on if we wrap it around and we can see it only goes up about that high. This is about six inches in length. The new one here that we put on is about seven inches in length and it gives us the extra length that we needed to be able to install the mounting plate for the shock absorbers that we just installed on here. With our factory U bolt we'd have almost no threads here sticking out. So our nut would be able to go on but it wouldn't be able to be properly torqued with enough threads to ensure that it's gonna stay torqued in that position.

Today, we're showing off the three inch wide U bolts with a half inch diameter. These have a seven inch length, and we're gonna use those to get our comfort ride system installed but we have them available on all the various sizes. So that way you can ensure you got a replacement for your trailer. We have them down as small as an axle diameter of one and three quarters of an inch. That's going to be your 2000 pound axles all the way up to an axle that is five inches in diameter.

And that's gonna be your larger axles that are around 12 to 15,000 pounds. Now the diameter of the U bolts do change as the sizes go up.Your smaller ones that only are for the one and three quarter inch axles typically have a size of three eights and of diameter while your large ones, with that five inch wide axle length is going to have a diameter of a U bolt of about three quarters of an inch to ensure that it can handle that weight rating of that. Now there are a couple of different U bolts that do have an overlap. The three inch ones that we're using here also have another three inch version available. That's in a nine 16th diameter. So you want to just check your trailer and your old U bolt to make sure you're replacing it with one that's going to be accepted acceptable with the hardware that you have on here. Cause we wouldn't be able to take a nine 16th and slide it through these brackets because the bracket on here was designed for a half inch. Replacing your U bolt is pretty easy. The smaller your trailer is usually the easier it is. Those larger U bolts. You are going to need to have a little bit more strength required to remove and torque down the nuts ' cause they are typically a higher torque value for the larger the U bolt. When taking them off you wanna make sure your axle is properly supported. If you follow along with us, we'll show you an example of how to remove and swap out the U bolts. We'll begin our installation by parking our trailer onto level ground. Your driveway in most cases is a great spot and lifting it up and removing our wheels. You'll wanna Jack it up and support the frame with Jack stands. You have to get it high enough off the ground where your wheels are off the ground so you can get those pulled off. And once you've got those pulled off here you are set up to begin working. We're using a lift here on ours to hold ours up. But again, it's gonna be very similar at home. You're just not gonna have the cross beam with the lift. You'll have just these Jack stands here underneath your frame. Now the Jack stands that I've got here. These are just precautionary Jack stands that are underneath the axles because we're going to be taking the U bolts loose. And once we take those loose, the axle can drop down. But I also have my Jack here underneath the axle and I'm gonna be moving this Jack around and keeping it under the axle that I'm working on this 'cause the Jack stands are really just supplementary in case something happens. My Jack, where two something we're to happen to the Jack with a fluid leak out we got a Jack stand here to support it. So we're going to remove the nuts here on top to take these U bolts off, the U bolts that are on your trailer. Aren't gonna be long enough to accept the brackets for the comfort ride system. So we are going to be replacing these U bolts. You can get new U bolts here at etrailer. Once we get these off, we'll show you the new U bolts. We're using a three quarter inch socket to remove the nuts, they are gonna be on there little snugs if I have to start it by hand, and then your tool can zip it off easily the rest of the way. Now we've got these all zip loose. We can pull our U bolts out of there. They just pull down. They're usually a little bit stiff. So just kind of working back and forth and just pull downward, come out of there. You can also kind of rock the top piece here. sometimes that helps . If you pull it over like this you can kind of get a little bit of a bang motion on it. To help persuade it off of there. So now we've got our factory bracket out of the way. This is your comfort ride. Your shock bracket. You'll have four of these in the kit and they are gonna be specific to a certain location. So we've got them set out here for the axle. So this is going to be for the front axle towards the front. We want this bracket to be angled down towards our equalizer here. And we also want to make sure that the holes are flat facing towards the center of our trailer like that. And the one for the axle behind this is gonna face like this. So these brackets are gonna be angled like this, on the opposite side of our trailer we want the same story to be mimicked over there. So we'll take our bracket now we'll set it on top of our leaf spring you see there's alignment pin there that does line up with the hole in the bracket. We can then set our factory bracket right back on top grab our new U bolts. We'll go up through the bottom through our shock bracket and our factory one. And then we'll secure it with the new nuts that came included with the U bolts. We'll do the same thing with the other two sets of holes right over on the other side of our leaf spring stack. Once we got them all started we can go back and tighten them down. You do wanna kind of go back and forth to try and tighten them down evenly. So you have roughly the same amount of U bolts sticking up above each night. So now we'll torque our hardware to the specifications found in your instructions. And that completes our look at red lines line of replacement, U bolts..

Customer Satisfaction Score:

Customer Reviews

Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter - 176400

Average Customer Rating:  4.9 out of 5 stars   (51 Customer Reviews)

This 5-1/2" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Bolt has an inner width of 2-3/8". 2 Nuts included.


I used the lower shock mounting plates with the u bolts that certain with springs and the top bracket already welded to the trailer. Ended up with some extra parts. Can I send them back for credit? Needed two more shackle bolts. Overall well pleased. Thanks Bob


Good quality, quick delivery, everything fit as expected. Thank you again, etrailer!


There U-bolts, what could be wrong.


Everything worked out great, Thanks aga in


Excellent quality but I ordered the wrong size


All the trailer parts one ever needs. All in one place, and always at very good prices. When you order a few heavy items always great to know after a certain $ shipping is free. Also just did a first ever return and went very smoothly.



I used these axle clamps after replacing a few bent 3500 lb axles on a dual axle car hauler. They were a perfect match, a bit beefier than the ones I removed and plenty long enough to fit over all components and have a few threads showing after the nuts were torqued down.


I have an old camper trailer frame about 20’ long. I haul firewood logs with it. I haul 5-6 cord of logs at a time which I know is to heavy for the trailer but I get by with it. 7 out of 8 u bolts rusted and broke so I’m flipping axles and springing it differently. to find these u-bolts locally the price was double your price and I ordered and received them quicker than I could have purchased them locally thanks for a good product at a reasonable price and quick shipping. I’ve got more parts I’m going to need for my haul truck. I will be back soon thanks


All products were as I expected and appear to be high quality. I would purchase again.


I would like to thank, I'm in the middle of a project
and resourcing & shipping has been a nightmare during these times, but
they have stepped up and been amazing....thank you!

The project is a horseless carriage,


Great quality, fit good, torqued no pro blem


Perfect fit


I have purchased from different times and have been very pleased with both their products and shipping. Parts are shipped fast and in great condition. Very pleased. Thanks etrailer...Dennis


Great...exactly what I needed... Rebuilding an older trailer...previous bolts were 2 1/8 inch but these solved the problem...thanks.


Everything was great. Works great. Thanks again


Heavy duty, they fit perfect


Perfect fit. Installation was simple.


Product arrived well packaged and in a timely fashion. The price and the quality were very good.


Good product. Fast shipping. Will continue to purchase from etrailer.


Everything about this purchase is excellent, looking forward to making more purchases in the future






Product was great wasn’t pleased with time it took to get. Apparently there are shortages everywhere.


Great price, super fast delivery, and everything needed to repair my trailer worked perfectly!


Strong U-bolts that will last for many years incl. matching strong nuts


Parts arrived in short amount of time . They are just what I needed and fit perfectly . Great service .


Works Great

Show More Reviews

See what our Experts say about this Redline Trailer Leaf Spring Suspension

  • What is the Torque Spec for Trailer Suspension U-Bolts
    The correct torque spec for trailer suspension u-bolts will depend on the the diameter of the bolt. You will want to use the following depending on bolt size: 1/2" bolts: 45 ft/lbs - 70 ft/lbs 9/16" bolts: 65 ft/lbs - 95 ft/lbs 5/8" bolts: 100 ft/lbs - 120 ft/lbs 3/4" bolts: 140 ft/lbs - 160 ft/lbs The Replacement U-Bolt part # 176400-Z has a 1/2" diameter bolt therefore, I recommend applying around 70 ft/lbs of torque. As for the shackle straps, there isn't really a specific torque rating....
    view full answer...
  • How Long are the Threaded Parts of Trailer Axle U-Bolt 176400-Z
    The threaded part of u-bolt # 176400-Z is approximately 2-1/2 inches long. The other options for 2-3/8 inch diameter round axles are a little less so # 176400-Z is the best option.
    view full answer...
    Image 1 for
  • U-Bolt and Plate for 2-3/8 Inch Diameter Axle
    The closest U-bolt we offer to the parameters you mentioned is 5-1/2 inches long, part # 176400-Z. The 1/2 inch U-bolt is for a 2-3/8 inch diameter axle. The corresponding U-bolt plate is part # 117595-G. Both parts are galvanized for corrosion resistance.
    view full answer...
  • U-Bolts & U-Bolt Plate For Trailer Axle e72GR
    The correct 5-1/2" U-bolts and U-bolt plates for the Trailer Axle with Idler Hubs # e72GR are the following: - U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter # 176400 - U-Bolt Plate - 2-3/8" Diameter, Round Trailer Axle - 1-3/4" Wide Spring - 1/2" Bolts # TRTP238175 You can get them individually since you mentioned only needing seven, but it does also come in a kit that has four U-bolts and plates, the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long...
    view full answer...
  • Leaf Spring Axle Upgrade For 2019 Keystone Bullet Travel Trailer
    It sounds like you have the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long # e54SR on your 2019 Keystone Bullet. I recommend relieving the weight off the suspension to see if the springs return to normal heights. I have included the picture below for reference for the following measurements. A-12-9/16" B-13-3/16" C-25-1/8" D-3-1/4" The trailer may have became overloaded and caused damage to the suspension components or even the axle. If you notice an excessive bend...
    view full answer...
    Image 1 for
  • Recommendation for Upgrading Double-Eye Springs Suspension to Remedy Trailer Lean
    To replace the 6,000lb leaf springs on your 2014 Grand Design 337, a great option is the Double-Eye 5-Leaf Springs, # e34SR. These are 25-1/4 inches long, so to confirm they will fit your trailer, it is best to try and measure your current, unloaded leaf springs to assure proper replacement length. Typically, the number of leaves on a suspension system will not have an affect on the setup, especially when looking at leaf springs within the same weight capacity. The difference in the amount...
    view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?

Info for this part was:

Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Lisa S
Updated by:
Lisa S
Employee Chris R
Video Edited:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924