Equalizer for 2-1/2" Wide Slipper Springs - Right Hand - 18-3/8" Long - 1" Center

Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - 10GDH-EQ42RH34 Review

Speaker 1: Today we're taking a look at an equalizer for a two and a half inch wide slipper springs. When it comes to the configuration, this is designed for the right-hand side of the trailer. Now this equalizer connects slipper springs on dual or triple axle trailers. You attach one spring with a bolt through the eye on this end of the equalizer, and then slip the arched end of the other spring into the equalizer on this end. And then the equalizer is designed to suspend from a center hanger that would be mounted onto the frame. Center hangers are sold separately.

If you need some or need one, you can check on options at etrailer.com. This equalizer is designed to transfer load and sudden impacts from one axle to another, helps to distribute weight evenly, and results in a smoother ride for the trailer.This is designed for use on trailers with 10,000 pound general duty Dexter axles and leaf springs with three quarter inch rubber bushed eyes. It allows for 42 and one quarter inch axle spacing. Again, it does fit two and a half inch wide slipper leaf springs. The center bolt hold diameter is one inch, the side bold hold diameter for mounting the spring is three quarters of an inch in diameter.

Overall, edge to edge this direction, we're looking at about 18 and a half inches. Width measurement measures about three and one eighth inches. And then the height measurement is about five and one quarter. And that's going to do it for today's look at the equalizer for two and a half inch wide slipper springs.