bing tracking image
  1. Trailer Leaf Spring Suspension
  2. Redline
  3. Hangers
  4. Spring Mounting Hardware
  5. Slipper Springs - 2-1/2 Inch
  6. 6 Inch Tall
Rear Hanger for 2-1/2" Wide Slipper Springs - 6" Tall

Rear Hanger for 2-1/2" Wide Slipper Springs - 6" Tall

Item # 093026
lowest price pledge
Our Price: $85.99
You Save: 31%
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 10 lbs
In Stock
093026 - Single Axle,Tandem Axle,Triple Axle Redline Trailer Leaf Spring Suspension
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Rear hanger works with trailer suspension systems that have 2-1/2" slipper springs. Lowest Prices for the best trailer leaf spring suspension from Redline. Rear Hanger for 2-1/2" Wide Slipper Springs - 6" Tall part number 093026 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Trailer Leaf Spring Suspension - 093026

  • Hangers
  • Spring Mounting Hardware
  • Slipper Springs - 2-1/2 Inch
  • 6 Inch Tall
  • Single Axle
  • Tandem Axle
  • Triple Axle
  • Redline

Rear hanger works with trailer suspension systems that have 2-1/2" slipper springs.


  • Configured as rear hanger
  • Provides attachment point for leaf spring
    • Hanger suspends spring from trailer frame by providing a resting place for the slipper end of the spring
  • Designed for trailers with 9,000-lb, 10,000-lb or 12,000-lb Hayes axles
  • Fits 2-1/2" wide slipper springs

Hanger Diagram

A7418 Rear Hanger for 2-1/2" Slipper Springs - 6" Tall

Replaces 093026

Video of Rear Hanger for 2-1/2" Wide Slipper Springs - 6" Tall

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - 093026 Review

Today we're going to take a look at the 6" tall Rear Hanger Bracket for 2-1/2" wide Slipper Spring. Now this heavy duty rear bracket will connect the slipper end of the slipper spring to your trailer. The hanger will suspend the spring from the trailer frame by providing a resting place for the slipper end of the spring. It is a weld-on installation, attaches to the underside of the trailer frame. Now, this hanger is specifically designed for trailers with 9,000 lb, 10,000 lb, or 12,000 lb Hayes axles. It is for a quantity of one hanger. Again, the application, this for the rear of the Slipper Spring.

I do want to give you some overall dimensions. The length from this edge to this edge it's going to be right at 4". The height from the very bottom to the very top is going to be right at 7-3/4" tall. The overall width from end to end is right at 3-3/4 or 3-1/2" wide. The inside width where the spring would go is right at 2-3/4".

Again, this is designed to fit 2-1/2" wide slipper springs. When they call this a 6" tall rear hanger, basically if you measure from the center of the hole up to the top of the bracket, it would be right at 6". That should do it for the review on the 6" tall Rear Hanger Bracket for 2-1/2" wide slipper springs.


See what our Experts say about this Redline Trailer Leaf Spring Suspension

  • Raising a Trailer that Already has the Springs Over the Axles
    Replacing the springs with ones that have another leaf isn't going to raise the trailer. Since the springs flex they'll just flex more or cause the ride to be stiff and therefore wear the suspension system out sooner. The only options you have to raise your trailer since the springs are already over the axles is to replace the hangers with longer ones and get larger tires. Neither will have all that much impact.
    view full answer...
  • What Does Hole In Rear Hanger For 2-1/2" Wide Hanger Used For?
    The Rear Hanger for 2-1/2" Wide Slipper Springs - 6" Tall # 093026 you were looking at has a hole just to allow you to measure the height of the hanger, and the hole lines up with the bottom of the support that the hanger rests against. To measure your hanger you will need to measure from the top of the hanger to the center of the 5/16" bolt hole you mentioned to get the length. You will also need to measure the inside width of the hanger as slipper springs can be 1-3/4" - 3" wide....
    view full answer...
    Image 1 for

Do you have a question about this Trailer Leaf Spring Suspension?

  • Why

    At we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924