Center Hanger for 3" Wide Slipper Springs - 4-1/8" Tall - 1-1/8" Bolt

Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - 29-43-2 Review

Speaker 1: Today, we're gonna be taking a look at a center hanger for three inch wide slipper springs. The center hanger works with multi-axle trailer suspension systems that have three inch slipper springs. Again, this is configured as a center hanger, and it suspends the equalizer on tandem or triple axle trailers. This is designed for trailers with 10,000 pound and 12,000 pound dexter axles. Again, it fits a three inch wide slipper spring and it's a weld-on installation. The holes located here on top are for spot welding.

These holes have a diameter of 5/8 of an inch and they're separated on center by 2 3/4 of an inch. The diameter of the large hole here, that's gonna give us a diameter measurement of 1 1/8 of an inch. This will work with the 1 1/8 inch diameter bolt, that item is sold separately. From the center of the large hole to the top of the hanger measured 4 1/8 of an inch. Overall length going in this direction is five inches.

The overall height measures about 5 and 5/8 of an inch. That's gonna do it for today's look at the center hanger for three inch wide slipper springs.