bing tracking image
  1. Trailer Leaf Spring Suspension
  2. Dexter Axle
  3. Alignment and Lift Kits
  4. Axle Mounting Hardware
  5. Tandem Axle
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift

Torflex Lift Kit - Tandem Axle - 2-5/8" Lift

Item # K71-707-02
lowest price pledge
Retail:$320.54
Our Price: $189.71
You Save: $130.83
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities. Lowest Prices for the best trailer leaf spring suspension from Dexter Axle. Torflex Lift Kit - Tandem Axle - 2-5/8" Lift part number K71-707-02 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (393)
  • Q & A (0)
  • Videos (3)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Leaf Spring Suspension - K71-707-02

  • Alignment and Lift Kits
  • Axle Mounting Hardware
  • Tandem Axle
  • Dexter Axle

Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.


Features:

  • Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle
  • Designed for use on trailers with tandem, #10 Torflex axles with 2,300 to 4,000-lb capacities
  • Spacers attach to side-mount brackets on your trailer's frame
    • Not compatible with top-mounted torsion axles
  • Includes:
    • (4) #10 Frame spacers (003-377-02)
    • 24 Plain washers (005-111-00)
    • 16 Locking hex nuts (006-126-00)
    • 16 Hex screws (007-177-00)
  • Distance between bolt holes center to center: 8"


Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.



K71-707-02 Torflex Lift Kit - Tandem Axle - 2-5/8" Lift

Installation Details K71-707-02 Installation instructions



Video of Torflex Lift Kit - Tandem Axle - 2-5/8" Lift

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Torflex Lift Kit Review

Hi there, trailer owners. Today, we're going to be taking a look at Dexter's Torflex Lift Kit. These are compatible with Dexter's Torflex Axles. This truck lift kit is going to work with your Dexter Axles and your trailer to raise your trailer up. This is going to help level out your trailer. If your truck sits too high, leaving the front end of your trailer jacked up and the back of your trailer down when you're hauling your trailer, this could lead to scraping at the back of your trailer due to the angle, angling it down.

And by leveling out our trailer, it also helps to load the tongue weight properly on our truck. So this is overall just going to increase the driving experience that we're going to feel when hauling our trailer.Our customer had an issue with his truck being too high for his trailer, causing it to haul unlevel. After we got done installing the components here, we can see that our trailer is completely level all the way down, which is going to increase the driving experience inside of our truck just due to the way our trailer is going to handle. The weight's going to be properly distributed onto the back of our truck, which is going to allow us to get proper braking and handling performance at the front. Our customer also has a weight distribution system on here as well to help even out that weight.

All these components are going to work together just to give you the smoothest and best handling performance when driving your truck down the road when hauling your trailer.Other issues some trailers can run into, particularly if they have the swing out arm styles for their support system, is that in certain areas, depending on how level the ground is where you're at and if there's any rough terrain, some of those arms may hit the ground when you're trying to swing them out and then you can't level properly. You have to move it around and adjust until you can find that sweet spot. Lifting the trailer up a couple of inches is going to give you that clearance that you're going to need, so you can more easily get set up and ready to go at your campsite.And this is what our lift kit looks like when it's installed. I've got the wheels off so that you can see the spacers in place here between our axle and the frame. That's where it goes.

Going to give us greater clearance to the ground, so when we're hauling our trailer, we don't have to worry about as much issues with scraping on the ground, particularly if we have leveling jacks and things like that that are hanging down below. And in some cases, depending on your campsite where you park it, you may be so low to the ground in that particular spot that you can't even use your landing gear properly to level out your trailer because they just don't quite meet where they need to.By lifting it up, we get more room to work with on our landing gear so we can get those legs swung out and everything set up properly. And it can also help out with getting it properly set up with your truck. If your truck's lifted up higher than your trailer, then you can haul it uneven. And you want to try to haul it as even as possible to have the proper load and tongue weight on your truck's hitch at the back.

So something like this is going to lift it up and provide that for you. And you can see it comes with all the hardware that we need, brand new hardware for attaching both our axle to our bracket, as well as attaching our bracket to our trailer.One thing you'll want to keep in mind when performing this installation is that you are increasing the distance between your axle and your trailer here by about this much. And depending on your brakes that you have installed, whether they are electric or hydraulic, you may need to extend the wires or the hydraulic lines in order for this system to work properly with your trailer. On the one that we installed today, we did have to add a few inches to the wiring in order to lower it down and be able to have proper travel of our suspension without damaging the wires that go to our electric brakes. And when it comes to the installation, it's considerably easier than many other style of lift kits for different style of suspension.With this style here, with the TorkLift Axles, it's as simple as lifting your trailer up to where it hangs off the ground. You want to give yourself a considerable gap between the ground and your tires when you got it up to ensure that once you get your kit installed, you can get your wheels back on if you did take those off. I would recommend at least four inches between that when lifting it up. But once you got it lifted up, it's as simple as placing your jack underneath, lowering down one side, installing the spacer, and then moving onto the next one. I'd recommend finishing up this axle, doing the other side, and then moving on to your next one. And that completes our look at the Torflex Lift Kit.


Customer Reviews

Torflex Lift Kit - Tandem Axle - 2-5/8" Lift - K71-707-02

Average Customer Rating:  4.7 out of 5 stars   (393 Customer Reviews)

Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.

by:

I ordered the Dexter K71-707-02 lift kit for my Haulmark Transport trailer. It was on back order and took two weeks to arrive but etailer.com communicate this to me with a phone call. I thought that was great customer service since most companies these days just email if anything.
The product arrive as described accept for the poor quality finish. I stripped it down and re-painted it. That was not such a big deal since I painted all the parts as I installed them and touched up my axle, hubs and under body while the wheels were off. It installed easily and raised my trailer just as I needed. My trailer was so low it scraped on drives and the rear stabilizer jacks did not have enough room to deploy.

Tip: The nuts in this kit are locking nuts and require a considerable amount of torque to tighten them. I used a pneumatic impact gun that made the job go much quicker.




by:

I haven't used them yet. On initial inspection the painted surfaces were marred to the metal and an area on one of the pieces looked like it had some slag chiseled of leaving bare metal. Slag or what looked like slag was near a bolt hole and will have to be removed by chisel or file as my grinding tools won't fit. Not too pleased with the manufacturing process and I hope it doesn't affect the integrity of the product's functionality.


Comments
You mentioned that one of the pieces had slag near a bolt hole that had to be chiseled off. I reached out to the manufacture and it was determined that it is spatter that happened during production. It can be removed and will not affect the integrity of the products functionality.
-- Etrailer Expert Jenny N - 06/06/2022
I have a 2018 airstream 25 ft flying cloud. Will this lift kit fit?
-- comment by: Fred C - 07/14/2022



by:

This lift arrived as advertised and in great shape. I had our local RV Service shop install it on our Lance 2285. It provides us with a lot more ground clearnance for those very unlevel campsites and roads.


Comments
Excellent!
Bob H - 07/28/2022


by:

I needed this axle spacer kit due to insufficient wheel well clearance on the used 2008 Jayco trailer we purchased (it turns out that ~2400 trailers left the factory missing this spacer back in 2008).
These spacers arrived quickly and in fine condition. They fit perfectly. NOTE: Installation went ok, but I did this in a campground, on gravel, and in 95-100° heat, so it was not easy and took me 2 full days. If someone performed this in cooler weather on a hard, flat surface it would go faster.
Very satisfied with the quality and with etrailer (I have used etrailer 3 times prior and have had no problems).




by:

I gave it a 3 based on my experience with installation, however it may have been the axles themselves that were the problem.



1) Couldn’t find a match on the etrailer website, so I had to speak with a rep to only give me Dexter axle’s phone number.

2) The first location for calling Dexter axle couldn’t help me either, so they gave me the number for where they were manufactured (tandem axles).

3) The 3rd call matched the serial numbers of my axles finally and gave me the kit # to order from etrailer.

4) The holes in the lift brackets were drilled for a minimum of 8” o/c, which was perfect for the trailer, but the axles were drilled at 7.75” o/c. This meant having to slot mill all 4 bracket for the axles .25” on each side for bolt clearance.

5) The original nuts and bolts that came off of my axles and trailer were .5” dia bolts, but the ones that came with the kit were WAY too big meaning I needed to either oversize (ream the axle and trailer holes) or buy new bolts, which is what I did.

It has nothing to do with etrailers service. Just wanted people to know what they’re getting into with these lifts sometimes! :




by:

Exactly what I needed. It was pretty easy to install but it did take me about 5.5 hours for my tandem axle. It wasn't hard I just did it by myself and took my time. I put it on my 2019 Rockwood Mini Lite 2503S. Fortunately there were service loops for all my break wires so I didn't need to extend any of them. It was definitely needed. I only gave it 4 stars because the paint job is really poor, just like others have mentioned. Do Not ream the nuts, they are lock nuts and are designed to only go on one way and are tight when threading down.




by:

I cannot comment on the installation as I had a mobile mechanic friend install it. 4hrs is what he charged me.
The stance is much improved. I should have done it years ago.


Comments
We sold the trailer to family. Th we y have towed for over 1000 miles with NO issues.
Daren C - 04/13/2020


by:

Fit perfectly and was not too difficult to install. Arrived quickly and really increased the ground clearance for the trailer body and attachments. Very happy!,


Comments
Great, the trailer still pulls like a dream but we have way better ground clearance for taking it boondocking. Installation was pretty straight forward.
David - 03/08/2022


by:

Installed lift on Lance 1985 to get the extra clearance for taking the trailer off road.

Product is great, and it was a simple install (took right at 3 hours). I had to buy a 15/16" wrench in order to fit in the tight space, especially when doing the bolt in the side while the bolt to the bottom was in place. Torquing the nuts was a chore now that I am getting older. :)

I used two jacks, one on each side of the axle to lower it uniformly (floor jack and bottle jack). I used two jack stands to hold up the trailer with wheels removed. (I had to raise the jack stands on wood to get the required elevation when I went to mount the tires.) Tools required were 15/16" open end wrench, 15/16" socket with 1/2" drive ratchet, 1/2" drive torque wrench capable of 150 ftlbs. I also used a 1/2" drive adjustable cheater bar to pry the existing bolts loose.




by:

Product was excellent and installed easily. Package/box was destroyed upon delivery as it appeared to have sat in the rain for a day or two. Plastic bag holding the parts was damaged as well. All parts were accounted for however.




by:

Don't expect the paint on the Brackets to be whole, there is no way they can be with how they are packaged. Regardless, this is a very easy to install lift if you have any mechanical abilities and tools to safely lift your trailer. I called to several RV shops in my area and was quoted 800.00 - 2000.00 to install this kit. It took me 2 hours including hooking the truck to the trailer, gathering tools. Very straight forward install and is as described on the website. We have a 2014 Flagstaff Classic Ultra Light fifth wheel which is 1.5 ton towable and with our 1 ton sitting so high at stock ride height, the rear bumper of the trailer was close to dragging at the slightest dip. Well made and easy to install.


Comments
Still working great after a year of use. We have teaveled about 5,000 miles with the lift kit and it has continued to performed flawlessly.
Douglas H - 07/22/2021


by:

Great kit, great instructions. Took two of us less than two hours to install including relocating brake wires. (However the trailer floor had been removed to resolve other issues and I do trailer repairs for a living) This is exactly what my enclosed trailer needed along with going to a 225 series tire from a 205 I achieved 3” of lift. There were a couple scratches in the paint on my parts but if a guy was really worried a quick touch with a spray can would be fine. I put em on as is. etrailer had these parts to me in under a week on the left coast.




by:

I had an RV service center put the kit on. But in doing so it did lift the trailer enough that I'm not wiping out my back steps and rear bumper as much as I was. I'm really happy with the product and the service center. And happy that I did fine the lift kit. Thank you etrailer.




by:

The Torflex Lift Kit solved my dragging issues! I store my trailer at my house in the country. When I would return, I have to go up a fairly big hill. The rear of the trailer would drag 75% of the time. I destroyed 2 scissor jacks before etrailer installed the lift kit. The etrailer guys were very professional and thorough. The guys adjusted my trailer hitch height to compensate for the lift. I also saw them test driving the trailer by running over some rumble strips. They were making sure the bolts were tight. I am very pleased with the install.




by:

Fit my 2017.5 Lance 2285 travel trailer perfectly. Installed myself over several days (1st day was just making sure I had the TT securely and safely raised--you basically have to lift it to where you have 3 inches of clearance below each tire). Take your time, buy or borrow the correct jack stands, jacks, torque wrench. etc. Read all of the instructions BEFORE you start.

Safety first! You will find yourself under the TT at times. In my opinion, a level, hard surface is required to properly and safely support the TT.

During install, I did notice slight side-to-side shift of the axle. Watch for this. It's easy to correct if you haven't already torqued the bolts!

These arrived with scratches exposing bare metal, so I touched up the paint before installing to help prevent rust.

Very happy with result. Have driven 150 miles (with TT fully loaded for dry camping) on a variety of roads and speeds and have had no issues.

Don't forget to adjust your hitch too.

This is not what I would call an easy job, especially getting the proper torque on the bolts! If I get another Lance TT, I'll make sure it has the lift kit already installed.




by:

Worked great easy install




by:

Quick shipping, Highest quality parts, Perfect fit, Saisfied with results. What else is there to say?




by:

I bought the lift kit for my dual axle trailer, and it does what I intended. The additional ground clearance is welcome. The installation is simple and the fit is excellent.

I've seen several complaints regarding the poor paint finish, and while the paint is not spectacular, I don't spend much time under the trailer admiring the underside, so its not an issue for me.

One improvement would be for the factory to drill a hole in the rear gusset to allow the brake wiring harness to be zip tied up and out of the way of possible snags, which would disable the brakes. The customer either can tie the harness through the open bolt hole welded to the original bracket, which holds the wiring in a low position to be snagged, or drill their own hole in the rear gusset of the lift to zip tie the wiring out of harm's way. Details matter, and this one shouldn't be overlooked.




by:

The product fit my 2018 Lance 2285 camper perfectly. It was a relatively easy install. My only con is that the paint finish on the product is very poor. The paint was chipping off right out of the box. I ended up repainting the kit before installation. I've gone on two camper trips with the kit installed and the camper towed great! Without the kit, I would've bottomed out twice for sure.


Comments
Product has been flawless.
Danielle W - 06/20/2021


by:

Over all I'm happy with the lift kit. (x2)
I
put it on my 1996 21' dual axial Aerolite trailer.

The supplied bolts DID NOT FIT and DID NOT ALIGN with the original bolt pattern.
For that reason, the install took a whole lot longer then I thought it would have.
I tried to re-drill (enlarge the holes) on the trailer side, as they where the smaller holes.
I tried a dremal with multiple different attachments, but ended up filing by hand.
So after burning a full Saturday and an extra $100 for nuts/bolts/washers, I had the kit installed.

Its been a year now and I'm loving the lift kit. Makes a world of difference in clearance.




by:

Very good service fast delivery




by:

Very simple install and works great!! I own a 2004 trail lite by r-vision and used these to gain ground clearance for the dump tank. These worked perfectly. Installation was simple. I used ramps to install instead of a Jack. It worked exceptionally well. Completed in about an hour. Drove over 3000 miles last year and stayed over 40 nights and had no issues. I wish I did it sooner.


Comments
Still working well! No issues, glad I made this decision.
John P - 04/11/2021


by:

Best thing ever! We wanted a lift on our Lance trailer but the available model we bought was missing this option.
We were able to order this from eTrailer and had a local axle shop install for us. If we were handier we could have installed ourselves with the great instructions from etrailer.
Perfect fit and we are so happy with the addition. No more dragging our tail in the driveway and we don’t have to worry about dips in the road anymore.
Same product our Manufacturer installs and the kit from etrailer was faster and less expensive than buying (and waiting) for Lance to send.




by:

Excellent service even when it was my fault for ordering the wrong part




by:

I have a roadmaster 2006 toy hauler, roadmaster torsion axles. I was not sure on the fit except the 8 in. hole measurements. Perfect fit, easy install



25
393
Show More Reviews

See what our Experts say about this Dexter Axle Trailer Leaf Spring Suspension



  • Determining if Torflex Lift Kit Can Be Used on 2015 Lance 2285 Trailer
    The Dexter Torflex Lift Kit # K71-707-01 that you referenced is designed specifically for Dexter #10 Torflex Axles that have a 2,300 to 4,000 pound capacity. For the tandem-axle kit you will use # K71-707-02. Based on my research, it does look like the Lance trailer you are looking at features a Torsion axle but I was not able to verify the exact model/manufacturer. I recommend checking with the seller to see if he can provide this information. This lift kit will raise the trailer frame...
    view full answer...
  • Lift Kit for a 2002 Hi-Lo Camper with Torsion Axle
    If the bolt holes on your torsion axles side mounted brackets are 8" apart on center then you are going to want to use the Torflex Lift Kit part # K71-707-01 for single axle trailers or part # K71-707-02 for tandem axle trailers. As long as you do not have 3" high profile brackets these will be an excellent option for you.
    view full answer...
  • Correct Lift Kit for #10 Torflex Axle
    I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the bracket that attaches the axle to the frame of your trailer is 3" or higher). So the correct lift kit for a #10 Torflex axle will depend on if your trailer has a single axle or double axle: - Single Axle: Torflex Lift Kit # K71-707-01 - Double Axle:...
    view full answer...
    Image 1 for Image 2 for
  • Lift Kit for 2019 Legend Trailer with 3,500 lb Torsion Axles
    For your 3,500 lb Dexter Torsion axles, you will want to use the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02. This will provide an additional 2-5/8" clearance. The distance between the mounting bolts is 8 inches center on center.
    view full answer...
  • Which Lift Kit for Dexter Torflex #10 Axle
    Thank you for the photo of the axle sticker; that's always helpful in helping us identify what you've got. That serial number is for a Torflex #10 axle, so the correct lift kit is the # K71-707-01 for a single axle or the # K71-707-02 if you've got tandem axles.
    view full answer...
    Image 1 for
  • Recommended Lift Kit For 2017 Casita 17 Trailer W/ #10 Torflex Axles
    I have a lift kit option for you, but there is not a shock kit currently made for torsion axles. For the #10 toflex axle in your 2017 Casita 17 we have the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-707-01 if you have tandem axles or # K71-707-02. Each of these kits will lift your trailer by 2-5/8". Keep in mind neither of the kits mentioned will work if your axle has 3" high profile mounting brackets. I included videos of the products mentioned for you to take a look at.
    view full answer...
  • Can Two Sets of Torflex Lift Kit # K71-707-01 be Used on Tandem Axle Trailer
    You can use two sets of the # K71-707-01 on a tandem axle trailer and it would be same as the part # K71-707-02.
    view full answer...
  • Recommended Lift Kit For A Dexter Axle 2544334 On A 2011 Lance 1985
    Per the manufacturer the correct kit you would need for your 2011 Lance 1985 Trailer with Dexter Axle # 2544334 is The Torflex Lift Kit # K71-707-01. The Lift Kit # K71-707-02 is not the correct kit. This lift kit will raise your trailer frame to provide 2-5/8 inch additional clearance between the trailer frame and axle. You will need to purchase two lift kits. I attached a review video link below.
    view full answer...
  • Lift Kit for 2018 Winnebago Micro Minnie
    Your 2018 Winnebago Micro Minnie has 3500 lb torsion axles but they haven't been clear as to the manufacturer. If the axles have mounting holes 8 inches on center, then you can use the Dexter Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02. If you have a different measurement center on center let me know and I'd be happy to assist.
    view full answer...
  • What Does 3 Inch High Profile Bracket Refer to with Dexter Torflex Lift Kits
    The Dexter Torflex Lift Kit # K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket. This is the bracket that attaches the axle to the frame of your trailer. If yours is taller than 3 inches, the lift kit cannot be used. All of the Torflex Lift Kits we have available have this same requirement. I have attached the complete...
    view full answer...
  • Tandem Torsion Axle Lift Kit for # 10 Side-Mounted Torflex Axles
    The Winnebago Micro Minnie 2106DS tandem axle travel trailer has a GVWR of 7000-lbs so it will have two 3500-lb axles. So long as the axles are # 10 Torflex types attached to side-mount brackets you can use lift kit # K71-707-02 to gain 2-5/8-inches of height. This kit CANNOT be used with top-mounted brackets or Torflex axles with 3-inch high profile brackets. You can confirm with Winnebago what axles are on your travel trailer by contacting them with your VIN.
    view full answer...
  • Will Dexter Torflex Lift Kit Work on Different Torsion Axle
    The Dexter Torflex Lift Kit # K71-707-02 that you referenced is only confirmed to fit Dexter #10 Torflex axles that have a 2,300 to 4,000 pound capacity. It's possible that it will fit other torsion axles like what you have on your trailer, but it has not been officially tested. Looking at the picture you attached of your axle I cannot be sure if it will work or not. I went out to our warehouse to measure the bolt pattern on these spacers and found that the bolts are spaced apart exactly...
    view full answer...
    Image 1 for Image 2 for
  • Lift Kit Recommendation for 2016 Lance 1985 Trailer
    I was able to determine that your trailer has torsion axles but not the brand or capacity. We know that Lance likes to use Dexter axles so I would be shocked if it wasn't a Dexter Torflex which the lift kit part # K71-707-02 you referenced would be a fit for. Check the axle and see if you can find Dexter Torflex # 10 listed then this would be the correct kit.
    view full answer...
  • Lift Kit for a 2014 Lance Lance 1985 Travel Trailer
    Though we have not yet installed the Torflex Lift Kit on a 2014 Lance Lance 1985 Travel Trailer, if you have 3,500 lb Torflex Axles I can confirm that the Torflex Lift Kit part # K71-707-02 will work for you so long as you do not have 3" tall brackets. This kit as you mentioned will raise the trailer about 2-5/8". It is currently the only lift kit we offer for a torsion axle trailer. I have attached a review video for you as well.
    view full answer...
  • Mounting Hole Dimension of Dexter Torflex Axle to Determine Lift Kit
    If your Livinlite 28RLS trailer has tandem Dexter Torflex #10 axles then the kit part # K71-707-02 that you referenced is a confirmed fit. The easiest way to verify the fit is to measure distance between the mouning holes of your current axles. If that distance is 8 inches on center then this is the correct kit.
    view full answer...
    Image 1 for
  • Recommended Lift Kit for 1990 Airstream Excella Trailer
    Based on my research, it does look like your Airstream Excella trailer is equipped with the Dexter Torflex axles. I do also recommend verifying this by contacting Airstream directly with your trailer's VIN to be sure of what was installed at the factory. Based on the 4,000 pound rating for your trailer axles, the correct Torflex Lift Kit should be the Dexter # K71-707-02. This lift kit is designed specifically for tandem #10 Torflex axles with 2,300 to 4,000 pound capacities. This will...
    view full answer...
  • Possible Lift Kit Recommendation for Trailer with 3k Rated Torsion Axles
    If the torsion axles of your trailer are Dexter Torflex axles #10 we have the lift kit part # K71-707-02 which will work well. The distance between the mounting holes of this kit is 8 inches. If you have a different brand though we won't have a solution. On the axle you should be able to find a brand and part number for the axles.
    view full answer...
  • Lift Kit Needed for Tandem 3,500 lb Torflex Axles on a 2008 Rockwood Ultra Lite 5th Wheel Camper
    From what you described it sounds like you need the Torflex Lift Kit # K71-707-02 which is designed for #10 Torflex axles with 2,300 lb - 4,000 lb weight capacities. If you can verify that your axles are #10 Torflex (found on the sticker) then this is the kit for you. Otherwise I'd need to know what exact axles you have to see if a lift kit is available.
    view full answer...
  • Correct Lift Kit for an Aluma 8216 Tilt Trailer
    The Torflex Lift Kit part # K71-707-02 is correct for your 2020 Aluma 8216 Tilt Trailer as you have 3,500 Lb Dexter Torflex #10 Axles. This kit provides you with a 2-5/8" lift which is currently all that is available. The bolt holes on this lift block are 8" apart on center so they will match what you have now.
    view full answer...
  • Lift Kit Recommendation for 3,500 lb Torsion Axle on Trailer with 8 Inches Between Mounting Holes
    Since you have a torsion Axle that is rated for 3,500 lb that has bolt hole centers that are 8 inches apart that means you most likely have a Dexter # 10 Torflex axle and the correct lift kit you'd need is the part # K71-707-02. This will give you a lift that is 2-5/8 inches.
    view full answer...
  • Possible Lift Kit Recommendation for 2003 Trail Lite 8300 by R-Vision
    Most likely the lift kit you need is the part # K71-707-02 that you referenced which fits number 10 TorFlex axles like we are almost certain you have but I recommend finding the label on the axle which has the capacity/info listed and verifying that you do have the 10 TorFlex axle. It can also be listed on the Vin plate of the trailer up near the coupler as well. Let me know what you find either way and I'll let you know best option!
    view full answer...
  • How to Determine if Torsion Lift Kit Will Fit Winnebago Micro Minnie
    The Torflex Lift Kit # K71-707-02 may be exactly what you need for your Winnebago Micro Minnie 1706FB with tandem torsion axles but we do not have any database of axles and I was unable to find the specific axles on your trailer in my research. This lift kit will require that your Minnie have Tandem #10 Torflex axles, which is a possibility because #10 Torflex axles will have capacities between 2,300 lbs and 4,000 lbs. The Torflex Lift Kit # K71-707-02 will also work with tandem axles...
    view full answer...
  • Install Time for the Torflex Lift Kit # K71-707-02
    If you are comfortable working with tools then the install of the Torflex Lift Kit # K71-707-02 will take you about a day. There is a great customer review that says it took him 6 hours to complete the installation at home. If you will be taking it to a shop then it really just depends on how good the shop is. You may need to just call around and see what they say. A review video and the installation instructions have been linked for you to check out.
    view full answer...
  • Do Trailer Axles have to be Aligned After Installing Torflex Lift Kit K71-707-02
    Torflex Lift Kit - Tandem Axle - 2-5/8" Lift Item # K71-707-02 doesn't require that you have your axles aligned after installation but it is good practice to do so. It is actually easier than you might think. Basically, measure from center of the trailer coupler to the center of the axle on each end. Be sure to measure from exactly the same point on the coupler! You want the measurements to be exact up to 1/16 of an inch difference. On a tandem axle trailer once you have the front axle...
    view full answer...
    Image 1 for


< Previous
123. . .6



Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Written by:
Wilson B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.