Curved Equalizer for 1-3/4" Wide Double-Eye Spring - 14-3/4" Long - 9/16" Center Hole

See what our Experts say about this Dexter Trailer Leaf Spring Suspension

• How to Get the Widest Spread Between Tandem Axles
  All of the full suspension kits we offer are going to give you U-Bolt distances between 29-1/2" and 34" but the real determining factor is with the length of your leaf springs, really. If you take a look at our Suspension Kit # APT5 it has both distances listed. If you're talking about a large equalizer then the largest we have is the Dexter Axle Curved Equalizer # K13-142-02. The best thing to do when replacing trailer suspension parts is to measure what you currently have and then replace...
  view full answer...
• Can Equa-Flex Equalizer Replace Dexter Axle 13-142 Equalizer on a Heartland Wilderness
  You can definitely swap out your Dexter Axle Curved Equalizer # K13-142-02 for the Lippert Equa-Flex Cushioned Equalizers # LC314336. There is about 1-1/4" difference in height between them but that's not enough of a difference to be worried about. Attached is a review video for you to check out.
  view full answer...
• Replacement Equalizer Needed for Dexter Axle Equalizer 13-142
  If you are simply needing to replace some worn equalizers then we actually do carry the part you are searching for. It is listed as part # K13-142-02 on our site and is a direct replacement for the 13-142 equalizer that you referenced. I confirmed this with my contact at Dexter Axle. If you are looking to upgrade your current equalizers then no, there is no equalizer upgrade we currently carry that will directly fit the large dimensions that you referenced. You would have to change out...
  view full answer...
• Recommended Lippert Equa-Flex Cushioned Equalizer for 35 Inch On Center 3,500 lb Axles
  The Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K # LC279687 is the correct equalizer for 33 inch or 35 inch spread. You will need to measure your current equalizer from center of hole to center of hole left to right. This system is 5-1/2 inches on center at rest. I've attached a video showing this equalizer on a 35 inch axle spread. If your system requires a wider equalizer measurement like # K13-142-02, the Equa-Flex Cushioned Equalizers - Double Eye...
  view full answer...
• Replacement Suspension Parts for 2015 Jayco White Hawk with Dexter Axles
  The largest equalizers we have are the 14-3/4-inch Dexter # K13-142-02 and the Lippert Equa-Flex cushioned equalizers # LC314336 that are 14-5/8-inches. These Lippert rubberized equalizers replace the standard equalizers on your tandem-axle trailer's double-eye leaf spring suspension. The rubber cores absorb road shock. Both of these feature a 9/16-inch center bolt hole. I linked for you our main page for trailer suspension parts including shackle straps and bolts as well as a helpful...
  view full answer...
• Comparing MORryde Equalizers MR34AR and Roadmaster Comfort Ride Shocks For Tandem Axle TT
  The Dexter Equalizers # K13-142-02 you have on your tandem axle travel trailer can absolutely be replaced with the MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K # MR34AR you mentioned, as they are the exact same length at 14-3/4". The MORryde # MR34AR will be slightly taller, but would only lift your trailer maybe 1/2" or so. A shock absorber kit and these equalizers do the same function, but a shock absorber kit is much more effective and would...
  view full answer...
• Determining If Equa-Flex Equalizers LC314336 Will Fit 2020 Coachmen Freedom Express 257 BHS
  Thanks for the pictures! Since your current equalizer is 14-5/8" long the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K # LC314336 you were looking at will be an exact replacement. Based on the pictures it looks like from the center of the upper hole to the center of the bottom hole is around 3", and from the center of the upper hole to the center of the bottom hole on the # LC314336 is 3-1/4" as shown in the included diagram, so it will work just fine. I included...
  view full answer...
  
• Replacement Equa-Flex Equalizer System for Dexter 013-142 Equalizers
  To replace your current Curved Equalizer for 1-3/4" Wide Double-Eye Spring - 14-3/4" Long - 9/16" Center Hole # K13-142-02 you can use the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K # LC314336. This cushioned equalizer is 14-5/8" long, so it will be the closest match to your existing equalizer and won't change the geometry of your system. If you also need new shackles and bolts I recommend using the Lippert Components Tandem Axle Equa-Flex AP Kit - Wet Bolts...
  view full answer...
• Upgrade for Dexter Curved Equalizer 13-142
  Yes, there is an upgrade for the Dexter Curved Equalizer part # K13-142-02 that you have on your trailer now and that is the Equa-Flex Cushioned Equalizers part # LC314336 which have a rubber core that minimizes back-and-forth movement in addition to helping absorb road shock. You can also add the Wet Equalizer Bolt part # 126B2 for an even greater upgrade to your existing suspension. I have attached review videos on both of the above items for you.
  view full answer...
• Recommended 14-1/2" x 3" Tall Equalizer and Replacement Shackle Kit
  To replace your 14-1/2" x 3" tall equalizer you will want the Curved Equalizer for 1-3/4" Wide Double-Eye Spring item # K13-142-02. This equalizer is slightly larger at 14-3/4" but will still work for your trailer. For upgraded shackles and wet bolts you will want the MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR46ZR (2-1/4" shackles) or item # MR76ZR (3-1/8" shackles). These kits come with the bronze bushings, wet bolts and shackle straps.
  view full answer...
• Recommended Heavier Duty Leaf Springs For 25 Trailer With Tandem 3500lb Axles
  We have exactly what you are looking for. Since your leaf springs are right around 25-1/4" long with no weight on the axle I recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e57SR which will give you the extra support you are looking and will bolt right up to your trailer. For replacement U bolts you will need four of the # CE23002, and for new hardware for mounting the springs to the hangers we have the # 166081 which is a standard bolt and nut, or the # 126B2 which...
  view full answer...
• How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
  The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure center-eye to center-eye for the horizontal bolts and then from the center of the top eye to the centerline of the horizontal eyes. Be sure to also note your axle weight rating as well. I'm attaching dimensional photos from the Leaf Spring #e22YR...
  view full answer...
  
• Upgraded Equalizer and Shackle Kit for a 2010 Bullet Premier Trailer
  We do have an upgraded equalizer for your Dexter Curved Equalizer item # K13-142-02. You will want the Equa-Flex Cushioned Equalizers item # LC314336. For upgraded shackles and wet bolts you will want the MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR46ZR (2-1/4" shackles) or item # MR76ZR (3-1/8" shackles). These kits come with the bronze bushings, wet bolts and shackle straps. To find out what size springs you need for your 2010 Bullet Premier Trailer you will need...
  view full answer...
  

Do you have a question about this Trailer Leaf Spring Suspension?