1. Trailer Axles
  2. Dexter Axle
  3. 3500 lbs
  4. 95 Inch Long
  5. Leaf Spring Suspension
  6. Electric Brakes
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs

Item # 7359765-EB
lowest price pledge
Our Price: $576.15
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 104 lbs
Quantity: 
Dexter Axle Leaf Spring Suspension - 7359765-EB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs part number 7359765-EB can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (5)
  • Q & A (25)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 7359765-EB

  • 3500 lbs
  • 95 Inch Long
  • Leaf Spring Suspension
  • Electric Brakes
  • 80 Inch
  • 5 on 4-1/2
  • Dexter Axle
  • EZ-Lube Spindles

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Bolt pattern: 5 on 4-1/2"
  • Axle tubing outer diameter: 2-3/8"
  • Brake flange configuration: 4 bolt
  • Grease cap outer diameter: 1.986"
  • Wheel stud diameter: 1/2"
  • Wheel size: 13" - 15"
  • Limited 5-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


7359765 Dexter Trailer Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 3,500 lbs

23-26 (K23-026-00) 10" x 2 1/4" LH Electric Brake Assembly - Drivers Side - 3.5K Axles

23-27 (K23-027-00) 10" x 2 1/4" RH Electric Brake Assembly - Passengers Side - 3.5K Axles

84546UC3-EZ (K08-247-94) Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - E-Z Lube - Qty 2

11402 LubriMatic Marine Trailer Wheel Bearing Grease - 14 oz. Cartridge






Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs - 7359765-EB

Average Customer Rating:  4.8 out of 5 stars   (5 Customer Reviews)

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.

- 7359765-EB
by:

I can not say enough about how good your product is! The installation went very smooth. I would highly recommend your product. It was great to see that everything comes with it right down to the grease. 640283


Comments
Great took the trailer to AZ this last year no problems.
James - 05/15/2020

76623

- 7359765-EB
by:

Worked and fit great. 876141



- 7359765-EB
by:

Cust service was nice and helpful. First packages came in under expected time. Wish the beams for axels were packaged, however they are fine, it’s metal! All and all worth the price. 874645



- 7359765-EB
by:

great product! although i was under the impression that the axle would come assembled. other that that i am happy with the purchase and price. 706794



- 7359765-EB
by:

Perfect size, easy to install. Fast delivery and great customer service. Will buy again and recommend to friends and family. 629822


5
5

Ask the Experts about this Dexter Axle Trailer Axles

  • Replacement 3,500 Lb Axle for 1997 Lamar Trailer 16 Foot Long
    Thank you for these measurements! I would have to concur with you that your best option would be to replace the entire axle. It sounds like you have two 3,500 lb axles with a hub face close to 95" end to end. The hub face is measured from the outer edge of each hub where the wheel would sit (see photo). I recommend you take a look at the Dexter Trailer Axle w/ Electric Brakes part # 7359765-EB which has a hub face to hub face measurement of 95" and a spring center to spring center measurement...
    view full answer...
  • How to Get Larger 10 x 2-1/4" Hubs on Trailer With 10 x 1-1/2" Dexter 008-418-021 Hubs
    Thanks for that information and because of your unique bearings combination there isn't a way to get larger replacement hubs alone. So to go from your 10 x 1-1/2 hubs to the larger 10 x 2-1/4 inch hubs you would need to replace your axle. In order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is...
    view full answer...
  • Replacement Bearing Kit for Dexter Axle on 2002 Northwood Nash 22H Travel Trailer
    The 1043 doesn't give me any cross-reference information on your axle. I did look up the trailer based on year/make model and can determine you will have 3,500 lb axles. That makes it easy to determine bearings because Dexter only has one option for that size regarding bearing kit. You will want the # BK2-100 bearing kit for each wheel.
    view full answer...
  • Recommended 3,500 lb Axle with Electric Brakes and 6 on 5-1/2 Inch Bolt Pattern Hubs
    For your replacement axle with hubs you will need to piece it together, but I can give you all the parts needed. I recommend starting with the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs # 7359765. Then I recommend the Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA electric brake assemblies so you don't need to do the manual maintenance adjustment. Finally you can add the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 6...
    view full answer...
  • How To Determine Correct Dexter Replacement Axle With Electric Brakes
    There are options for you, one of which will require you to measure while the other does not, but I was unable to find any type of reference to a Dexter 3K7744 axle. So to replace your current axle with one that has electric brakes you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle you need, which should match or exceed the...
    view full answer...
  • Leaf Spring Lengths Available for Use with Dexter Trailer Axle Rated for 3500-lbs
    The axles like # 7359765-EB that we offer do not come with leaf springs but we do offer leaf springs rated for this axle's 3500-lb capacity. On the linked page you can see the 3500-lb double-eye leaf springs we have and these range in their eye-to-eye length from 23-1/4 to 27-inches (part # SP-210275). If you are rebuilding your trailer suspension and want to replace the springs along with the axle be sure to measure your old spring's eye-to-eye length when it is removed from the trailer;...
    view full answer...
  • Does the Dexter Trailer Axle with Electric Brakes Come With Self or Manual Adjust Brakes
    The Dexter Trailer Axle w/ Electric Brakes part # 7359765-EB comes with two manual adjust braking assemblies. We do not offer the complete assembly with self-adjust braking assemblies but you can obtain this using a combination of the Dexter Trailer Axle Beam part # 7359765, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469, and two of the Dexter Trailer Hub and Drum Assemblies part # 84546UC3-EZ.
    view full answer...
  • Ordering Dexter 3,500 lb Axle with 5 on 5 inch Bolt Pattern
    I can help you get basically the same thing as the # 7359765-EB but with the bolt pattern you need but we don't have it as a complete kit. You'd need the bare axle part # 7359765, the hubs # 84556UC3, and then the brake assembly set # 23-26-27 and you'd be set!
    view full answer...
  • How to Determine Correct Replacement Axle for Trailer
    I can tell you how to determine if the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs # 7359765-EB is the right replacement for your trailer, as it will only take a bit of measuring. Assuming you know that your trailer currently uses 3,500 lb axles, what you need to do is measure your current axle's hub face to hub face and spring center to spring center. If you take a look at the accompanying diagram you can see that the Dexter Axle you...
    view full answer...
  • Recommended Dexter 3500 lb Axle with Electric Brake Hubs to Replace Axle with 8-147 Drum Hubs
    Your hubs are not directly compatible with any axle we currently carry. The 8-147 hubs are agricultural hubs and although very close to fitting will not work with the new axle spindles. My recommendation is to get your new axle with the kit that includes the electric brake assemblies and hubs. I recommend the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs # 7359765-EB if you have spring centers 80 inches apart. If you have springs 74...
    view full answer...
  • Do the Bearings Come Packed On the Dexter Trailer Axle with Electric Brakes 7359765-EB
    The Dexter Trailer Axle with Electric Brakes part # 7359765-EB does come with everything you need (axle tube, braking assemblies, hub/drums, bearings/seals, grease, etc.) but you would need to install and pack the bearings/seals yourself.
    view full answer...
  • Replacement Axle with Hubs & Brakes for Wells Cargo Tandem-Axle Enclosed Trailer FT85162
    The Wells Cargo website indicates that their enclosed tandem-axle trailer model FT85162 has a GVWR of 7000-lbs so it has two 3500-lb axles. The specs did not indicate axle length. We have several 3500-lb axle kits with hubs and brakes that are shown on the linked page. All have 5-on-4-1/2 hubs and electric drum brakes. Two lengths are offered, the 89-inch size like # 35545E-ST-89 and the 95-inch length such as # 7359765-EB. These measurements are from hub face to hub face. Please...
    view full answer...
  • Replacement Brake Assemblies and Hubs for 1960 Airstream Trailer
    It sounds like your assemblies are not the typical assemblies and will need to be replaced. For your brake assemblies, I recommend the Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-7-SA along with mounting hardware # BRKH12. If you don't have the brake flange compatible, you can use the Brake Mounting Flange for 3" Round Axle # 4-44-1 which needs to be precisely welded in place. Then for your drum brake assemblies to match, I need some more information. I will need either...
    view full answer...
  • Replacement 3,500 Lb Dexter Axle D4518710
    I spoke to my contact at Dexter Axle and was able to determine that you have a 3,500 lb axle with 80" spring center and 94" hub face measurement which means the correct replacement for you will be the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. If you have idler hubs and you would like to replace these as well then you can use the Dexter Trailer Axle w/ Idler Hubs part # 7359765-I or if you have hubs/drums and you would again like to replace these as well then you...
    view full answer...
  • Replacement 3,500 Lb Axle for Enclosed Cargo Trailer with 92" Hub Face
    The Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 is the most common 3,500 lb axle which has a hub face measurement of 95" and a spring center measurement of 80" although the spring seats can be moved. I would be willing to bet this is likely what you have now but please note the hub face is actually where the wheels butts up against the drum so the base of the lug stud. Please note, we don't offer any axles with a 92" hub face but if this is really what you have then...
    view full answer...
  • Replacement for Lippert 3500 Lb Axle
    You have a Lippert 3500 lb axle with 10 inch brake assemblies/hub drums. We can't order custom axles, but we do offer a Dexter # 7359765-EB off-the-shelf axle that's very similar, the only difference is that the leaf spring seat center to center distances don't match exactly. This isn't necessarily a big deal, as it's pretty simple to use two replacement spring seats # TRSS238 and to have them tack welded on a 75 inch center. If the existing 80 inch spring seats interfere with the installation,...
    view full answer...
  • How To Choose the Correct Replacement Dexter 3,500 Lb Axle
    It sounds like you might be looking for a replacement Dexter 3,500 lb and if that is the case we have a few options. These options will vary based on the spring center and hub face measurements. The two options we offer which come with hub/drums and braking assemblies are the part # 35545E-ST-EZ-89 which has an 89" hub face and 74" spring center and the part # 7359765-EB which has a 95" hub face and 80" spring center.
    view full answer...
  • How Much Do The Timbren Axle-Less Trailer Suspension System Electric Brake Hubs Weigh
    The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs part # A35RS545E weigh about 135 lbs. They have a 3,500 lb weight capacity. The Timbren trailer suspension systems are about 35 lbs heavier then a standard 3,500 lb capacity axle like Dexter axle part # 7359765-EB.
    view full answer...
  • 3,500 lb Axles Compatible With Timbren Silent Ride Suspension
    Yes, we do have axles with electric brakes that are compatible with the Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 2-3/8" Round Axles # TSR7000T04. A 2-3/8" round axle will be one with a 3,500 lb capacity and we carry a number of options, which I will list for you below. The only thing to be aware of is that in order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center...
    view full answer...
  • Can Tandem Axle Trailer Have Two Different Weight Capacity Axles
    It sounds like you are making or rebuilding a trailer. It's a good idea to have both axles rated the same on a tandem axle trailer. Together the 5,200 lbs Dexter Trailer Axle # 6340624-EB and 3,500 lbs Dexter Trailer Axle # 7359765-EB would be 8,700 lbs, however depending on how your trailer was loaded and the position of each axle it may not be able to handle the weight. Not to mention the bolt pattern is different, so different wheels and tires would need to be used for each axle. Keeping...
    view full answer...
  • Replacement 3,500 lb Axle with Electric Brakes and 5 on 5-1/2 Inch Bolt Pattern
    Unfortunately we don't have any hubs compatible with your axle and spindle. My recommendation is to replace your axle with the Dexter Trailer Axle w/ Electric Brakes - EZ-Lube # 35545E-ST-EZ-89 if you have a hub face to hub face measurement of 89 inches and a spring seat measurement of 74 inches center to center. If you have a measurements of 95 inches and 80 inches then I recommend # 7359765-EB. If neither of those measurements work, then you still have an option for your replacement....
    view full answer...
  • Replacing Lippert 3,500 Pound Axle with 76 Inch Spring Seat Length
    Your trailer is equipped with a Lippert 3,500 pound axle that has a 95 inch hub face length and a 76 inch spring seat length. The closest replacement axle we have available to these specs is the Dexter Trailer Axle # 7359765-EB that features a 95 inch hub face length, an 80 inch spring center length, and a 3,500 pound weight capacity. The axle comes with hub and electric brake assemblies already mounted. If you were to use this particular axle on your trailer though new spring seats...
    view full answer...
  • Recommended 3500-lb E-Z Lube Axle with Electric Brakes for 2005 Jayco Eagle 12
    We have just the kind of axle kit you're looking for to replace your Jayco 12's OEM 3500-lb axle. All you need to do is confirm two dimensions on your axle, hub face spacing and spring center spacing, to select the correct one. If you refer to the linked diagram you'll see how to measure these two dimensions, labeled A and B respectively. If your hub face spacing is 95-inches then use axle # 7359765-EB. If it is 89-inches then use axle # 35545E-ST-EZ-89. Both axles come complete with...
    view full answer...
  • Upgrading Axles from 2,200 lbs to 3,500 lbs to Utilize 10 Inch Electric Brake Assemblies
    The 4 hole brake mounting flange will work for 10 inch brakes because the 7 inch and 10 inch assemblies use the same 2-7/8 inch on center mounting holes. The brake assemblies like # AKEBRK-35 or self-adjusting assemblies like # AKEBRK-35-SA will both fit 10 x 2-1/4 inch hubs. The issue you will find is with the 2,200 lb spindles because you won't find the 10 inch hubs compatible, so you will need to upgrade your axles as you stated to the 3,500 lbs axles. We have a couple of options...
    view full answer...
  • Replacement Brake & Hub Assemblies for Dexter 8-147 Hubs
    Your hubs are not directly compatible with any axle we currently carry. The 8-147 hubs are agricultural hubs and although very close to fitting will not work with the new axle spindles. My recommendation is to get your new axle with the kit that includes the electric brake assemblies and hubs. I recommend the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs # 7359765-EB if you have spring centers 80 inches apart. If you have springs 74 inches...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Installed by:
Kathleen M
Video Edited:
Dustin K
Written by:
Alexander C
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.