CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1

CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1

Item # CE14017G

lowest price pledge

Retail:$14.58

Our Price: $5.40

You Save: 63%
Trailer Leaf Spring Suspension

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.6 lbs

Quantity: 
In Stock
Trailer Leaf Spring Suspension CE14017G - 1-3/4 Inch Tall - CE Smith
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • Spring Mounting Hardware
  • Hangers
  • Slipper Springs - 1-3/4 Inch
  • Single Axle
  • Tandem Axle
  • Triple Axle
  • 1-3/4 Inch Tall
  • CE Smith
This hanger bracket secures the slipper end of a slipper spring on your trailer's suspension. It is constructed of corrosion-resistant galvanized steel. Lowest Prices for the best trailer leaf spring suspension from CE Smith. CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1 part number CE14017G can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (28)
  • Q & A (13)
  • Videos (1)
  • Photos
  • Why etrailer?

CE Smith Trailer Leaf Spring Suspension - CE14017G

This hanger bracket secures the slipper end of a slipper spring on your trailer's suspension. It is constructed of corrosion-resistant galvanized steel.


Features:

  • Heavy-duty bracket connects the slipper end of a slipper spring to your trailer
  • Bolt-on installation
    • Attaches to the underside of trailer frame
    • Does not include mounting hardware
  • 7-Gauge, galvanized steel construction is sturdy and resists corrosion
  • Made in the USA


Specs:

  • Application: rear of slipper spring
  • Overall dimensions: 4-1/4" long x 2-1/4" wide x 1-3/4" tall
  • Inside width: 1-7/8"
  • Quantity: 1 bracket


Install a new suspension without the hassle of welding a hanger to the bottom of your trailer. Bolt-on design attaches to the bottom of your trailer frame and provides a mounting point for the slipper end of your slipper spring.


Galvanized Steel

Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.



14017G 7-Gauge, Galvanized Steel Replacement Rear Slipper Spring Hanger Bracket by CE Smith







Video of CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for CE Smith Trailer Suspension - Leaf Spring Suspension - CE14017G Review

Today we're going to look at the CE Smith Galvanized Steel Rear Hanger Bracket for 1 3/4" wide slipper springs. This is a heavy-duty bracket, which will connect the slipper end of a slipper spring to your trailer. It is a bolt-on installation, attaches to the underside of the trailer frame. That does not include any mounting hardware. This is a seven gauge galvanized steel construction, which is very sturdy and resists corrosion. Now galvanized steel parts are hot-dipped in zinc after they're stamped.

This will create a nice coating that is typically about three mils to five mils thick, and this thick all around coating allows any galvanized steel product to provide years of use without rusting or corroding. This part is made in the USA. Again, the application on this the rear of the slipper spring. Overall dimensions on this, I want to show you. The length from this end to this end is going to be right at 4 1/4". The width from outside to outside is 2 1/4".

The height from the very bottom to the very top, is going to be right at 1 3/4" tall. Now the inside width where the spring would go is going to be 1 7/8". Now this is for a quantity of one bracket. Now this is designed for trailers with 1,000 pound up to 4,300 pound axles, and as we mentioned, this again fits 1 3/4" wide slipper springs. That should do it for the review on the CE Smith Galvanized Steel Rear Hanger Bracket for 1 3/4" wide slipper springs..


Customer Reviews

CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1 - CE14017G

Average Customer Rating:  4.9 out of 5 stars   (28 Customer Reviews)

This hanger bracket secures the slipper end of a slipper spring on your trailer's suspension. It is constructed of corrosion-resistant galvanized steel.

- CE14017G
by:

bracket worked well 234455



- CE14017G
by:

Only place I could find this bracket so I didn't need to weld!! 221811



- CE14017G
by:

Quality of the coating is very poor. Extremely rough with high peaks/pits. That make the slip spring not slide and keep the brackets from mounting flush. I will have to sand off the coating and get them powder coated or something to keep them from rusting. Highly disappointed. Etrailer and their support was fantastic as always with extremely fast shipping and answering my questions quickly. 491038



- CE14017G
by:

I purchased this to allow me to lift/shim the slipper spring away from the trailer because the tire was hitting the fenders. 628519



- CE14017G
by:

Great site to shop for all trailer needs. Perfect for my needs. 578800



- CE14017G
by:

Product arrived as scheduled and as described. We have ordered from etrailer a few times and never had any issues with their parts. 523762



- CE14017G
by:

Evidently...UPS tracking was incorrect saying it went to New Hampshire! As it left Phoenix last night heading here...I've never seen that happen before! I know it's not your fault but I have had a lot of issues with UPS and refuse to use them if at all possible. The parts got here on time and I got it all installed. Went well. Now I got my water trailer back on the road ...without it we almost ran out of water at our home so it was critical to get it up again after I broke a spring! 495743



- CE14017G
by:

etrailer.com had the hard to locate parts that I needed and got it sent out the same day I ordered it. Delivery was fast which minimized the down time of my boat trailer. etrailer.com got me back on the water with the parts I needed. 485127



- CE14017G
by:

Order was processed quickly, shipped the following day. Basic shipping is a bit slow, but the tracking feature is helpful. Parts arrived, installed on trailer and I'm back on the road. 483737



- CE14017G
by:

Great product. Very well made. 461939



- CE14017G
by:

fits Perfect 436317



- CE14017G
by:

EAYS ORDERING WEB SITE, SHIPPED ON TIME AT A GOOD RATE. ALSO HAD EXCELLENT PACKAGING. 418792



- CE14017G
by:

Product looks like just what I needed. Haven't installed yet but I have no doubt that they will be perfect. 397122



- CE14017G
by:

Parts came on time and as represented on the website. Looked all over for these brackets for my boat trailer. Your company was the only site I found with them. Thanks, looking forward to doing business again. 384523


Comments

The trailer axle and parts I purchased are working good. I had some modifications to make in my trailer springs but I knew that going in. The axle is much heavier in construction than the o.e.m axle so I should never have a problem with this one.

D G - 06/07/2018

39360

- CE14017G
by:

All Parts for trailer suspension fit perfectly. Shipping was lightening fast. Excellent products and service. 381990



- CE14017G
by:

well made!!!! 351243



- CE14017G
by:

Can't wait to put it all together, if it will ever stop snowing or raining. thank for the fast delivery. Enjoy the weather were ever you are. Thanks Again! 349493



- CE14017G
by:

Excellent quality and very fast shipping. Thanks etrailer!!! 337783



- CE14017G
by:

works great great shipping 328262



- CE14017G
by:

Product is as viewed in ad was priced right and received order a day earlier than expected. Will definately use this company for future needs 295649


Comments

Working as it should no problems

jim m - 09/17/2017

28271

- CE14017G
by:

Nice and heavy built 277198



- CE14017G
by:

Great, but I would have liked the bolts to be included. Thought they were. Probably my mistake. 272542



- CE14017G
by:

Exactly what I needed. Great price and fast service. If you own a trailer this is the place when you need parts. 253675



- CE14017G
by:

Exactly what I was looking for. Second time customer, both times completely satisfied. Great prices,selection, and followup. I will be ordering from e-trailer again... Suggestion: how bout a coupon or incentive for return customers? Thanks again... 220333



- CE14017G
by:

I needed these parts that I could not find anywhere. You had them, Thanks 189829



- CE14017G
by:

just what I wanted, and it was here in no time. easy to install 132585



- CE14017G
by:

Perfect, just perfect, and maybe the only place that carries this item. It makes all the difference in the world for my trailer to function to specifications. 99603



- CE14017G
by:

as described and high quality galvanizi ng 85833


28
28

Ask the Experts about this CE Smith Trailer Leaf Spring Suspension
Do you have a question about this Trailer Leaf Spring Suspension?


  • Can Trailer Suspension Hangers be Bolted On
  • The top holes you see in trailer suspension hangers such as Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear Item # APS3 are for button welds and not bolts so these hangers should not be bolts on. The problem is that with a weld the hanger is fixed and cannot move. With bolts no matter how tight you make them the bolt will always be smaller than the holes in the hangers and given the forces applied could cause the hangers to shift and throw off the alignment...
    view full answer...

  • Replacement Rear Hanger for Shorelandr Boat Trailer with 1-3/4 Inch Wide Slipper Springs
  • If you are looking for a weld-on option we have 1 rear slipper spring hanger that fits 1-3/4 inch wide trailer suspension slipper springs. It is # 115706S. Please note that any welding should be performed by a professional welder. For a bolt-on option we have # CE14017G. I have also included a link to our help article on slipper spring suspension for you.
    view full answer...

  • Are there Bolt-On Hangers for Trailer Leaf Spring Suspension
  • We do have a couple of bolt-on spring hangers # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # SP-124275. Its not likely that professional welder would charge that much. You might be able to find one locally via an iron workers union near you. For u-bolts for your 1-1/2 inch square axle you can use # SP01-120 for 2 u-bolts and 4 nuts. For a u-bolt plate you can use # 115983. For a hanger kit you could use # APS1. Now what you could...
    view full answer...

  • Do Slipper Spring Rear Hangers Require Bushings
  • Nope, the slipper spring rear hangers like the part # CE14017G do not require the use of a bushing between them and the spring. I attached a picture that shows how it will look when it is installed.
    view full answer...

  • Are Galvanized Leaf Spring Hangers Available
  • If your trailer uses slipper springs, we do offer galvanized hangers. They are part # CE14016G front hangers, and # CE14017G for rear hangers. We also carry some galvanized shackle links. You can check them out at the attached link.
    view full answer...

  • Hanger Dimension Recommendation for Installing Slipper Springs SP-179275
  • Yes, you would want the hangers used for installing the Slipper Springs part # SP-179275 that you referenced to be 23-1/8 inches apart when installing these springs on your trailer. I attached a review video for you to check out and a help article on slipper suspension systems as well.
    view full answer...

  • Installation Bolts for the CE Smith Hanger Bracket part # CE14017G
  • The mounting holes of the part # CE14017G and # CE140116G that you referenced are 7/16 inches in diameter. You would need to get bolts that would fit those hole sizes. Since applications can vary there isn't a set bolt size you would need. Your best option would be to find a bolt long enough for your application that would fit in the hole.
    view full answer...

  • Availability of Galvanized Trailer Axles and Suspension Components
  • If your trailer will be using slipper springs, we offer galvanized front hangers, part # CE14016G and rear hangers, part # CE14017G. There's also some galvanized shackle links available, which you can see by clicking the provided link. We offer a small selection of off-the-shelf axles, but none of them are galvanized. You can custom-order a galvanized axle, but you'll need to know the hub face to hub face dimension you need, as well as the spring center to spring center dimension. If...
    view full answer...

  • Hanger Compatibility For Bolt-On Application On 2016 Tracker Trailer
  • The Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole # E4139 is a weld on application. It hasn't been tested for bolt on installations, so I can't confirm it will hold up if you drilled it and bolted it in place. We have only 2 bolt-on hangers and they are for slipper springs, # CE14016G and # CE14017G.
    view full answer...

  • Replacing Hangers with 3 Mounting Holes on a 1990 Escort Boat Trailer
  • We do have a few hangers with 3 holes in the top, like parts # CE14016G and # CE14017G, but they are for 1-3/4" wide slipper springs. The former is 2-1/4" tall while the latter is 1-3/4" tall. If these match your current hangers then look no further! These are for bolt-on installations but all of our other hanger options are weld-on applications. Otherwise you may be better off to choosing a different hanger from the linked selection and have it welded by a professional to your trailer....
    view full answer...

  • Availability of Rear Slipper Spring Hanger that Bolts on for 1-3/4 inch Wide Spring
  • Sounds like you are looking for the part # CE14017G. This is a bolt on rear slipper spring hanger that would work well for you. It's also for springs that are 1-3/4 inches wide.
    view full answer...

  • Availability of Rear Slipper Spring Hanger for 1-3/4 inch Wide Spring
  • For a rear hanger designed for a 1-3/4 inch wide slipper spring we have the part # CE14017G. This hanger can be used with the slipper springs that have a flat rear side or if they have a hook style.
    view full answer...

  • Recommended Slipper Spring and Hanger to Make Trailer Functional
  • We unfortunately do not have exactly the spring you are looking for. What I recommend is getting the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long # SP-178275 and moving your rear hanger forward because you will be within 1/4 inch of where your axle would have been with this spring. Then you will be able to replace springs as needed and still support your sailboat properly for transport. If you want a bolt on slipper spring hanger for the rear, I recommend...
    view full answer...


Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Joe V
Video by:
Andrew K
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
David L
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.