Product Experts Available Now!
Call 800-298-8924
/
etrailer/
A-Frame Jack/
3500 lbs/
Electric Jack/
25-1/8 Inch LiftItem # EJ-3520-BBX
Retail:$129.95
Our Price: $105.47
This item qualifies for free shipping
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.
Features:
Specs:
Customers compare EJ-3520-BBX to these similar products
Customers Who Purchased This Camper Jack Also Bought...
Replacement parts available for this product
Video of Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - Black
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today we're going to be taking a look at the Electric Jack for A-frame trailers. This jack is going to feature a lift capacity of 3,500 pounds. It's going to let you raise and lower your A-frame trailer. The jack is fused protected, so right here is going to be our fuse holder. That's going to have a 500 volt 30 amp fuse. On the front of the unit, right here, are two, very easily accessible toggle switches.
These are located on the front of the housing. That way, you can easily operate the jack. You're going to have your on and off switch, which is going to control the LED light. Then you're going to have the extend-retract switch, that controls the up and down movement of the jack. The LED light is going to illuminate at a downward angle to help you focus on your coupler. There's a lens here at the bottom that allows light to come through.
That's really going to come in handy when hooking up, or disconnecting at night, or low-light conditions. The unit comes with an emergency crank handle, which is this piece right here. If you ever experience a situation where maybe you don't have power for some reason, you can still operate your jack manually, if needed. The connection point for that handle, is located right here, at the top of the unit. Now, this is a nice sealed cap, that way it's going to do a great job at keeping out dirt, and moisture, and grime. That's nice, easily accessible for those situations where you may need to manually operate the jack.
Again, the handle is included to do that. Also, at the bottom of the unit, is the included drop leg. That's going to allow for increased lift, and it's going to save time when raising or lowering your trailer. The pin and clip is going to hold the leg at the desired location. At the bottom of the drop leg, is the welded on round foot plate. That's going to offer a diameter of 5 1/2 inches.
A foot plate does a great job at spreading out the applied weight, especially on softer surfaces, to help prevent sinking. The unit is made from a steel construction. It's going to have a black powder coated finish on the outer tube. Then on the inner-tube, and on the footplate, as well as the drop leg, we're going to have a zinc plated finish. All of that's going to do a great job at resisting rusting, corrosion, making sure that this unit lasts a long time, and that it looks good for a long time. The housing right here, this is all from a durable black plastic construction. Now, it is a simple bolt on installation. The mounting pattern, here on the mounting plate, that's going to allow you to you attach it to any standard A-frame trailer that has an attachment point for a round trailer jack. Then your mounting bolts are sold separately, but it does come with flat washers, and serrated washers. It's going to feature a single wire design. This is designed to wire to a 12 volt power source, with the included power lead. When it comes to grounding the unit, it's not a separate wire. It's actually going to ground through the mounting hardware. This power lead, I took a measurement from the bottom of the fuse holder, to the end of the power wire, and got a measurement of around 65 inches. That gives you an idea of how long that is. A few other measurements that I want to go over with you real quick, just to give you an idea whether or not this is going to work for your application. One of the measurements we like to do, is a bracket height measurement, with it retracted and with it extended. I'm measure form the ground to the bottom of that mounting bracket. That's going to give us a measurement of right around 9 inches. I did that same measurement with the jack fully extended, and got a measurement of 28 1/2 inches. If we subtract those two measurements, it gives us the lift, or travel, which is 19 1/2 inches. Now, the drop leg provides an additional lift or travel of 5 5/8 of an inch. It gives it a total lift, or travel, or 25 1/8 inches for this jack. Another measurement that we like to do, is a clearance measurement. We want you to make sure that you have enough clearance, or enough room from the mounting surface to the top of the jack, making sure that it doesn't interfere with any other components. If we take that measurement, that's going to give us a measurement of 20 1/2 inches, and that was measuring from the bottom of the mounting plate, to the very top of the unit, which is right here, at that knob that allows us to gain access for the situations where we need to manually operate by connecting our crank handle. The outer tube gives us a diameter of 2 1/4 inches. The inner-tube has a diameter of 2 inches. Real quick, I want to show you the drop leg, and then we're going to hook it up to power, so you can see how it functions, and how it operates. This is our drop leg, and, again, on the bottom, is our foot plate. It's got 4 different mounting holes on there, or adjustment holes. Those holes are separated on center, apart from one another by 1 7/8 of an inch. That's going to be your incremental height adjustment. All right, we're going to go and hook it up to power. Want to make sure that we have a good ground connection. All right, so you can see that that light is on. To extend the jack, we just push up on the toggle switch. It's got really nice movement to it. It's pretty quiet for an electric jack, as well. Really nice movement, and again, that will go all the way up. To lower it, just push on the down button. Now, it does have a stop line, right here, that way you don't exceed the fully retracted position. Also, when you hit that, the motor will actually stop, which is a great indication to let off of the switch, so we don't cause any damage to the motor. The LED light, you can see that has a clear lens, which is going to allow light to come out, but also on the bottom, it has a lens, which casts light at a downward angle. Which again, is great for those situations where you're having to hook or disconnect at night, or in low-light conditions. That's going to do it for today's look at the Electric Jack for A-frame trailers.
Average Customer Rating: 4.7 out of 5 stars (39 Customer Reviews)
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.by: Art P.05/12/2017
Would have to say 4.5 on the rating only because of the installation instructions. On installation instruction #4 it tells you how to assemble the hardware and then directs you to a figure above. This figure is nothing more than the plain jack. Then it tells you on #6 to position the fuse holder as close to the power source positive terminal as possible. The fuse holder comes in already attached to the jack adjacent to the jack control switches. Ease of installation other than above. Common sense will get anyone past those directions. Jack operation was perfect after installation. Test of jack showed it works as advertised and I can't wait to use it in the upcoming camping trip. Ordering, customer service and shipping/receiving was excellent. I was informed on the delivery date and status of shipment by ETrailer to whole time. Properly packaged and the unit came in in excellent shape with no defects. As you can see in the pictures it is a clean install and I added a very nice cover which was also sold through E-Trailer. Another nice product to finish a successful installation. 379431
by: Travis06/16/2017
The Ram jack was very easy to install and hook up!! The motor runs super quite and has plenty of power to raise and lower our camper trailer. Only thing wrong with it was the plastic housing has a crack in it which I think happened in shipping. 394778
by: Eramirez06/17/2017
The jack was not well put together. Some screws on the motor cover were falling off and the LED light was loose in its housing. The housing itself was installed incorrectly. I had to take it apart to put it together properly. Also, the cable where the fuse connection is was exposed. I used electrical tape to seal it. Not good for something new! After that mess the install was pretty simple. The jack lifts my trailer easy enough. On paper, this is the only jack that has long enough travel and drop leg to level our trailer on our driveway. The black also matches the trailer well. Time will tell if it holds up to normal use. It's on a Winnebago Micro Minnie 1706. 395461
by: Bob N06/14/2017
I installed the jack in about 10 minutes. It works great. I would recommend this to anyone who needs a good jack without spending a lot of money. The service was great also and I will be buying from etrailer again if I need anything. Thanks! 393024
by: Matt J.06/19/2017
I installed this on a 2015 Keystone Hideout 24BHWE. It bolted right in with my existing bolts and just needed some heat shrink tubing and a ring terminal crimped onto the wire. Now lifting up the tongue enough to get the weight distribution hitch on is a breeze. Leveling out the front/back is quick and easy too. I have good clearance at the bottom of the jack pad when it's in the shortest configuration. 396362
by: Doug H.06/14/2017
My electric trailer jack came at noon today. Got home from work at5:30 and had all hooked up and running in 25 minutes! Easy to install! Was worried about the motor head being too tight against propane bottle cover...but it fit perfectly!Runs super smooth so far. I put up with a hand crank tongue jack for far too long. Seems like a good product for a reasonable price!! 394253
by: chuck04/28/2017
received my order in 3 days after ordering This jack is well built it weighs about 24 lbs. I am very pleased with this order it operates very quietly and is going to be a great asset on my trailer.cost less then any others I have seen except some on other site, But I would rather buy from a company I trust everything I have bought from etailer has been top quality. 373795
by: linda C06/16/2017
got our new jack this week. my husband installed it yesterday & is very pleased w/it. our old 1 didn't have a light so he likes that feature, now, too. when we were young we didn't mind cranking QUITE so much, lol, but now that we are older theres nothing like a power jack to make 1 more thing a little easier. 394756
by: Ed C01/25/2017
We were really impressed by the quality of our new 3500 Jack. But as it is winter here in Michigan we can't give you a review on how well it works. We can tell you that Etrailer was one of the easiest site that I have been on, not only with ordering but also with tracking. We will be ordering from here again. 335339
by: Fred Ingley01/07/2017
Haven't yet opened and installed. However it arrived very quickly. On a prior order I have nothing but praise. Prices were very competitive, telephone assistance with identifying the exact needed add quick delivery. Turned out to be exactly what was needed. Highly recommended etrailer. com. 330796
by: Harold S.05/26/2017
Of all of these jacks I checked out this one had the best features and the best price. When I received it I was very pleased. I have it on now and am really happy the way it performs. My wife or children could have installed it as it was that easy. Thank you for supplying such a great product! 385281
by: Mike S05/10/2017
Power jack works great. 15 minute install. Delivery on time great job 378807
by: Ron03/30/2017
Currently only used once after installation to park the trailer for the winter. Will be using this summer. Seems like a quality unit especially for the price. Functioned well on the test after install and raised the trailer almost full height for a sloping driveway. 360746
by: Roy R.02/10/2017
Very pleased with the product and fast delivery time. 340604
by: William M04/10/2017
Great customer service super quick delivery. Very simple bolt on installation. Jack is quiet works perfectly. Much nicer than the cheap factory installed electric jack that I hand cranked more times than pushing the switch. 366879
by: Mike R06/18/2017
Couldn't be happier. Received power jack very promptly. Installed that evening for first trip. Worked fantastic. Second purchase fm etrailer.com and both times service was prompt and first rate. Thank you etrailer. 395645
by: Ryan06/19/2017
Simply installation. Powerful and not as slow as i thought it would be. Shipping was fast and the service team is top notch! I can see a new site being added to my bookmarks and being used for all my RV needs. 395956
by: Brent06/16/2017
Installed in 30 minutes on my travel trailer. Looks like a great quality jack and works really well. Only 4 stars because it took me a month to receive it since it was on back order. 394754
by: chief03/02/2017
Received fast and in new condition. Everything works and fit properly. Wiring was easy. Installed on the frame of a 2007 coachmen RV ultra light camper. Good purchase. 347369
by: Jim Smth06/17/2017
This was a great deal very easy to install. works great. just what I was looking for. I would highly recommend this 395249
by: Bob A06/14/2017
Looks good l think it will work out nice for my trailer The jack is of good quality and fits to the trailer specs 394217
by: Ken P.06/18/2017
Delivery was FAST (free and two days!) Have only had a chance to use it once, but works as advertised. 395746
by: Wayne M01/30/2017
Just got it today...I opened box...everything looks good...have not used it yet but it looks GREAT!! 336920
by: Rick C.06/19/2017
Easy install. Seems to work great. Can't wait to see how it works on next camping trip. 396163
by: Bob J05/09/2017
Same day shipping, product exactly as described. Easy to install. Nice for the price. 378368
by: Joe D02/28/2017
Came quick, and was very easy to figure out and install, took me 25 minutes !! 346800
by: Lp02/10/2017
Looks good functionality good and easy hook up, makes hooking up smoother 340483
by: Kip06/17/2017
Product was as expected. Good quality. And fast Shipping. Very Happy. 395257
by: Tim F.05/20/2017
Seems great so far. Has a nice foot and seems to have enough power. 383098
by: Gary04/29/2017
Easy to install. Seems well made. Very quiet operation. Works well! 374111
by: ronp02/22/2017
quick delivery. Easy installation in 15 min. No more cranking. 344419
by: Merritt T01/15/2017
The fastest shipping I have experienced. Easy installation. 332648
by: JS05/02/2017
Delivery as scheduled, works as adverti sed 375088
by: Kevin W.02/16/2017
Awesome transaction. Fast FREE shipping. 342337
by: Kevin06/14/2017
Got my power jack with fast shipping 394182
by: JOHN05/10/2017
Received all products promptly 378700
by: Tom H01/15/2017
Works great. Just installed 332773
by: David C.06/17/2017
Work's great . 395141
by: Bob H04/11/2017
Works great. 367152
Ask the Experts about this etrailer Camper Jack
Do you have a question about this Camper Jack?
Do you have a question about this Camper Jack?
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality camper jack for the best price.
Real product know-how.
Most detailed, accurate camper jack information available.
Information for this part was:
Installations, made easy.
Fast shipping.
Personalized service for life.
Trusted since 1946.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
