Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2
(647 reviews)
Price: $121.31
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (647)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Scissor Jack
- 6001 - 7000 lbs
- 2 Jacks
- 24 Inch Lift
- Ultra-Fab Products
- Bolt-On
- Weld-On
- Steel
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Features:
- Scissor jacks level and stabilize 5th-wheel, travel, horse and cargo trailers
- Heavy-duty worm-gear jacking mechanisms prevent slippage
- Perfect for stabilizing loads
- Large footplates provide excellent stability
- Bolt-on or weld-on installation
- (2) 3" Wide x 10" long mounting plates have multiple holes to fit most applications
- Mounting hardware not included (3/8" bolt is recommended)
- E-Z crank handle included
- Sturdy steel construction
- Black powder coat finish resists corrosion
Specs:
- Quantity: 2 jacks
- Lift: 24"
- Collapsed height: 4-3/4"
- Collapsed length: 26"
- Support capacity per jack: 6,500 lbs
- Combined support capacity: 13,000 lbs
- Footplate dimensions: 4-1/2" wide x 9" long
- Mounting plates: 3-1/2" x 7-1/4"
- Lifetime warranty
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks.
48-979002 UltraFab Scissor Jacks - 24" - 2 Pack
Item # UF48-979002
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 - UF48-979002
Average Customer Rating: 4.7 out of 5 stars (647 Customer Reviews)
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.by: Biro07/03/2023
Great Addition to Flagstaff camper!!!!!Pop up camper came installed with only 2 stabilizers. We added these 2 to the front . We love the extra stability. Easy to install with self drilling/tapping hex head screws.
by: Bill D05/15/2023
I bought these two jacks for the rear of my Keystone Bullet. I had already purchased two and installed them on the front. The trailer seems more stable now, with not so much motion evident when moving about inside the trailer. No drilling was necessary. The jacks bolted on using the existing holes in the trailer (2016 Keystone Bullet 311BHS).
by: Steven11/08/2019
if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.
by: Thomas 06/14/2023
These scissor jacks work well. Installation was relatively easy, just had to drill a few holes. The only reason I'm giving 4 stars instead of 5 is that they turn counterclockwise to extend and all the other jacks of this type I've used turn clockwise. This isn't a huge deal but I didn't see anything in the description that mentioned the reversed threading.
by: Scott D.03/09/2016
The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.
by: Keith04/03/2023
Was a very simple unbolt old and install new. The mounting hole on the jacks matched up with the pattern on the jacks being replaced so there was no extra drilling required.
by: Brian05/16/2023
Bought these for my 2018 Rockwood Mini Lite 2506s to replace all 4 of my jacks. They were only 5000 lb jacks and were all bent up. These jacks are beefier and hold 1500 more lbs per jack. Bolts up perfectly in the same holes. Also the trailer feels more sturdy when they are all down.
by: Stacey 02/09/2023
Definitely a heavier duty version of our campers stock stabilizers. They bolted right up to the brackets and glad we have new stabilizers. I hope the paint lasts on these as that seems to be an issue with the other, cheaper stabilizers. Time will tell.
by: Bobby F02/02/2023
I have used these scissor jacks on a trailer stand hunting blind. Which is a top heavy situation. The jacks on all 4 corners of the trailer added a tremendous stable platform.
by: weszab01/17/2014
Easy to mount jack
Closes to a very small size
Load and unload without the trailer connected.
Weszab
1/17/2015
The jacks are still working great. Thanks again!
by: Patrick 10/11/2023
These appear to be exactly the same as the jacks on my camper. Very good quality.
by: Dave B.04/23/2014
eTrailer processed the order quickly and I had the jacks within 3 days....thank you eTrailer. They were really easy to install and operate flawlessly. I was concerned that they threading would be too fine and the jacks would take forever to raise and lower, but I was wrong. They operate smooth and fast with no issues.
If you need to stabilize the back end of your trailer I would certainly recommend these.
by: Anthony08/21/2023
Great, get 2 for price of one from local dealer
by: Harry06/03/2019
I purchased these stabilizers to replace the electric stabilizers on my 2017 Jayco. The electric stabilizers were terrible. They rusted in two years and didn’t do much to stabilize the camper. These new ones installed quickly and easily and I immediately noticed the difference. They arrived within 3 days of ordering.
by: Terrance 09/23/2023
Fast delivery and quality product.
by: Gary 08/30/2023
Fit perfect
by: Karen 07/31/2023
Easy to install, and work better than the original jacls
by: Michelle 11/23/2022
We installed the scissor jacks last year. One was in one direction and the other one winds in the opposite direction. Never saw anything like that before ever. Then when lowering the jack for the first time it folded like nothing we have seen before. I work hard for my money and the scissor jacks purchased were not built well at all (they didn’t even make it thru the first use)
by: Bill08/30/2023
One of the 2 jacks is extremely difficult to open.
by: Terry 02/10/2023
Jacks are better than what came on my trailer originally
by: Mark Cornell05/11/2020
The jacks worked excellent and will definitely recommend this company to anyone needing parts for their RV... I will be buying more things for my camper soon
by: Stanley 07/13/2023
Bought 2 sets very sturdy
by: Clyde 03/07/2023
RV came with cheap jacks. These are a great replacement, super heavy duty.
by: Tony06/27/2018
New jacks and tires arrived quickly. Installation was easy since no new drilling was required.
by: Bryan03/03/2023
The Jacks Fit As Advertised But When You Raise The Jacks The Rods Extend Out Board Instead Of Inboard like My Old Ones. Be Careful You Will Scrape Your Shins.
25
647
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- Recommended Replacement Scissor Jacks For 1996 Trailright Gooseneck CamperI have attached a link to the product page for the scissor jacks we offer for trailers or RVs. I recommend scissor jacks like part # UF48-979002. These Ultra-Fab Scissor Jacks have a 24 inch lift and have a weight capacity of 6,500 lbs. These can be bolted or welded on for installation and feature footplates that measure 4-1/2 inches x 9 inches. I have attached a product review video for this jack you can check out.
view full answer... - Will the Ultra-Fab Ultra Scissor Jacks, # UF48-979002, Fit a 1999 Coleman Pop Up CamperThe Ultra-Fab Ultra Scissor Jacks, # UF48-979002, will most likely fit your 1999 Coleman Santa Fe pop up. But to be sure you will want to determine if the 3-1/2 inch by 7-1/4 inch base on the jacks is the appropriate size for where you want to mount the jacks. The frame does not have to be exactly this size to accommodate the jacks but you will want enough surface area contact between the jack and frame to safely use the jacks.
view full answer... - Can The Ultra-Fab Ultra Scissor Jacks # UF48-979002 Be Bolted On Instead Of Welded The Ultra-Fab Ultra Scissor Jacks # UF48-979002 can definitely be bolted onto frame of the trailer instead of welded. It's much more practical to bolt them on since scissor jacks tend to get caught on curbs or when going up or down steep hills and need to be replaced.
view full answer... - Recommended Scissor Jacks for 1974 Travco Motorhome Certain trailer items like scissor jacks are not trailer/motorhome-specific. In order to choose scissor jacks that will work well on your 1974 Travco Motorhome, you will just want to make sure you choose a set with the needed weight capacity, along with the proper jack height. You will want to make sure you don't lose any ground clearance by selecting a jack that extends further down when retracted. I recommend noting the weight capacity on your existing jack along with its height in order...
view full answer... - Best Stabilizer Scissor Jack For 20 Ft CamperI recommend the Stromberg Carlson Leveling Scissor Jack part # JSC-24-IND because it offers the most adjust-ability compared to the other scissor jacks. It can extend from 4" to 24" tall. You will probably have to drill holes to add the two new stabilizer jacks. If you already have mounting holes on the frame, I have attached the mounting hole diagram for your reference.
view full answer...
- Ultra-Fab Mounting Bracket Center-on-Center Bolt MeasurementThe distance, center-to-center of the bolts on the mounting bracket of the Ultra-Fab Ultra Scissor Jacks # UF48-979002 is 2". I have included a picture showing this as well.
view full answer...
- Replacement Scissor Jack for 2019 Rockwood A213HWFor scissor jacks that fit your 2019 Rockwood A213HW you can use the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002. These feature a bolt-on or weld-on installation with 3" Wide x 10" long mounting plates with multiple holes to fit most applications. They have a support capacity of 6,500 lbs per jack and come with a lifetime warranty.
view full answer... - Manual Scissor Jack to Replace Electric Jacks on Springdale Summerland Series SM2450 by KeystoneWe have scissor jacks like the Ultra Fab Jacks part # UF48-979002 that have 24 inches of lift and a 6,500 lb capacity. When you remove your old jacks and wiring basically you'll just have to start by removing the wiring near the jacks and switch and work your way back to where it connects to your RV's power source and then take it all out. Or if you want to leave the wiring in place you can disconnect it from the battery and then remove only what's easily accessible.
view full answer... - Length of Ultra-Fab 24" Jack When Fully Retracted?The collapsed length of the Ultra-Fab Ultra Scissor Jacks w/ 24" Lift # UF48-979002 is going to be 26". The bolt is only going to have about 1/2" sticking out from the end when the jack is collapsed, but that is included in the 26" measurement.
view full answer...
- What is the Fully Retracted Length of Ultra-Fa Ultra Scissor Jacks # UF48-979002I went out to the warehouse and pulled a set of Ultra-Fab scissor jacks, # UF48-979002, to measure. The collapsed length (jack fully retracted) is approximately 26 inches overall. I also made a short video showing the measurement and included a link to a video review for you.
view full answer... - Dimensions of Top Bolts on Ultra-Fab Ultra Scissor Jacks # UF48-979002I went out to the warehouse and pulled the Ultra-Fab Ultra Scissor Jacks # UF48-979002 and took some measurements for you (see image). The bolts on the top of the arms measure 2 inches center to center. The bracket measures 3-1/2 inches wide. Sounds like it will work for your application. I have included a video review of this jack for you to check out.
view full answer...
- Bolt Recommendation for Installing Ultra-Fab Scissor Jacks to Trailer FrameThe Ultra-Fab Ultra Scissor Jacks # UF48-979002 will work well on your C-channel frame. You can attach them with #14 self-tapping screws in the smaller holes and then the manufacturer suggests using 3/8 inch grade 5 bolts for mounting in the larger holes.
view full answer... - Scissor Jack Recommendation for 2009 Winnebago ViewI like to let our customers decide which of our products are the best all-around in a specific category. For scissor jacks the Ultra-Fab part # UF48-979002 is the clear winner as it has a ton of almost all perfect ratings and is our best selling option. Because of that I would recommend them for you. I attached a review video for these for you to check out as well.
view full answer... - Scissor Jack Recommendation for Front Stabilizers of 2017 Coachmen Catalina 281 DDSI looked at pictures of your 2017 Coachmen Catalina 281 DDS and found that at the front on the frame standard scissor jacks are mounted on it. We have the Ultra Fab scissor jacks part # UF48-979002 which would be a great option to replace the ones on your trailer that were damaged.
view full answer... - Replacement Husky Stabilizing Scissor Jacks for Heartland TrailerTrailer components like jacks and stabilizers are not typically trailer-specific and most any properly rated scissor jack should work great as a replacement on your Heartland Trailer. You will just want to make sure the weight capacity is at least equal to what you currently have installed and that the jack height is comparable. The Ultra-Fab Leveling Scissor Jacks # UF48-979002 referenced in your question have a 6,500 pound support capacity per jack (combined support capacity of 13,000...
view full answer... - Recommended Scissor Jacks for Dutchman 10,000 Pound RVA set of scissor jacks, one placed on each side of your trailer, will do a great job of reducing side to side movement and roll when the trailer is parked. You will just want to make sure the wheels are blocked so when the jacks are down the trailer will not be able to roll at all. For your 31 foot Dutchman RV that weighs 10,000 pounds, I recommend the Ultra-Fab Ultra Scissor Jacks # UF48-979002. These have a combined support capacity of 13,000 pounds and will provide 24 inches of lift....
view full answer... - How To Determine Fit of the Ultra-Fab Ultra Scissor JacksThe Ultra-Fab Ultra Scissor Jacks part # UF48-979002 are universal in fit and not specific to any one make and model. That said, I don't see any reason as you why you could not install these jacks on your trailer so long as you have space under the frame rail for them to mount. If you are simply replacing existing stabilizers then there will be no issue. I recommend using two sets of jacks, one on each corner as this will best help stabilize the trailer. The Ultra-Fab Ultra Scissor Jacks...
view full answer... - Scissor Jack Recommendation for a 1996 Coleman Pop Up Camper The Scissor Jacks part # UF48-979002 would work very well on your 1996 Coleman Pop-up Camper. The might be larger than what you have on your trailer now, but they won't be so large that they would look out of place or be overkill. They would just simply do a better job stabilizing your trailer than you old style. I attached a review video for you to check out as well. The overall length of the jacks when fully collapsed is 26 inches, and the overall height is 4-3/4 inches.
view full answer... - Can the Scissor Jack part # UF48-979002 Lift Trailer Enough to Level TrailerYou would want to use the Scissor Jack part # UF48-979002 to level the trailer and would not need to also use a separate jack to do the lifting. These scissor jacks would operate similarly to jacks that come with vehicles for changing the spare. That being said you would not want to use these to lift the wheels in the air.
view full answer... - Replacement Weld On Scissor Stabilizer Jacks For Camper TrailerThe Ultra-Fab Ultra Scissor Jacks part # UF48-979002 will work well to replace the weld on jacks on your trailer. You just want to make sure the width of the foot plate is not going to be an issue. The mounting plates of the 2 Ultra-Fab stabilizer jacks included in this part number are 3-1/2" x 7-1/4". I have attached a diagram for your reference.
view full answer...
- Dimensions Of Ultra-Fab Ultra Scissor Jacks # UF48-979002I don't have CAD files and cannot get them from the manufacturer for basic copying reasons. I can give you some basic dimensions and have attached a video to help as well. The Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002 have the ability to extend a full 24 inches. They have a footplate that is 4-1/2 inches wide by 9 inches long. The mounting plate to your trailer is a multi-hole plate measuring 3-1/2 inches by 7-1/4 inches in the same orientation as the...
view full answer... - Scissor Jack Recommendation for Trailer to Replace Drop Leg StabilizersLooks like you have a swivel style stabilizer jack like the Atwood part # AT82301 on your trailer and are wanting to go to the Ultra Fab kit part # UF48-979002 that you referenced. We don't have a bracket for this application exactly like you listed, but if you took the trailer to a fabricator like you mentioned they'd have no problem either welding them to your trailer or creating a bracket.
view full answer...
- Mounting Hole Dimensions of Ultra-Fab # UF48-979002 Stabilizer JacksIf you look at the photo I've provided, you can see the dimensions of the mounting holes of the Ultra-Fab # UF48-979002 stabilizing jacks. You could indeed use U-bolts if you were able to find the proper size, but the jacks are usually bolted directly to the frame members.
view full answer...
- Can You Use Stabilizer Jacks Without Having To Mount Or Weld Them To The RV FrameGreat question. The Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002 are just under 5 inches tall when they are fully compressed. So you should be able to squeeze them in. To directly answer your question. Yes you can use them without bolting or welding them to the frame. They are still going to support and stabilize the unit. Just remember they are not attached and forget them on the ground!
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristen H
Updated by:
Halie H
Updated by:
Eric H
Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steven
11/9/2020
Perfectly! Keep em clean with a coat of lubricant & theyll serve you well!