Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.
Features:
Specs:
Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Stromberg Carlson's landing gear was designed with safety in mind. The motor, manufactured by Lippert, won't trip circuits or cause problems with the coach's electrical systems. In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area.
Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.
This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (134 Customer Reviews)
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.Great website and our item arrived much sooner. I was especially impressed with the UPS tracking system on the etrailer website, easy and great looking
What a great company to do business with you guys did everything to insure my satisfaction. Called me back emailed me researched the issues i had .great job thanks everyone at etrailer . Oh i purchased straumberg carlson landing gear jacks for a customers 5th wheel customer is very happy
Called in and had some questions on product.
Salesman was VERY helpful.
Ordered product, came early and it fit and worked great.
The product I ordered fit my older camper without any modifications. It was easy to install and very pleased. The only drawback was the UPS 3 day shipping which took 7 days and part of the assembly was missing as the box had ripped open. etrailer had no control over this situation but went out of their way to make it right.
Customer service is great!
Landing Gear is quality made and happy with the purchase, took less than 2 hours to remove the old landing gear and install the new. I was thinking it would raise up and down a little faster, but it sure beats hand cranking.
Shipped promptly. I read several unfavorable reviews regarding difficulty in telephone communications and time of delivery. However, even though I did experience difficulty in telephone communications, the email line proved to be quite satisfactory, with response in less than 5 hours. The delivery time was very good.
Great product.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Let me start by saying this review is about the product, not e-trailer. etrailer is great. I love doing business with them. Their prices beat anybody, and the free and FAST shipping is a bonus. Now to the review of the LG-3 landing gear. The pros of this product are they are a direct replacement for the Lippert system on my trailer. No cutting, drilling or welding. They fit in the original brackets. I installed them while camping in about 2 hours with simple hand tools. The cons are they are a direct replacement for the Lippert system on my trailer. They use the same weak motor, that struggles to lift my trailer. The kit was missing bolts and pins and I had to use my old hardware until I could get back to town to buy new hardware. I wanted to go with the Bulldog 10K system, but wanted something that work with my Lippert remote system. The original system failed. I suspect this one will too. Next time I will go with something heavy enough to do the job. Check out the before and after pics and the pic of what can happen when your jacks fail and you have to resort to using hydraulic jacks to lift your trailer. A $4000.00 repair that could have been much worse.
Steve B - 09/20/2018Thanks so much for the follow up. If you do need to use your bottle jacks in an emergency situation, we do recommend to chock your trailer wheels and minimize all trailer movement as much as possible since bottle jacks are less stable than your primary landing gear.
--
Rachael H - 9/24/2018Review from a similar Deluxe Electric Landing Gear in Camper Jacks
In June 2022 while stranded at a campground in the finger lake region of NY, etrailer sourced and delivered a Stromberg Carlson landing gear kit that matched up perfectly with my 11 year old Crossroads Cruiser fifth wheel. The kit included all parts needed (electric motor, gearbox, jackshafts, landing pads, new switch, bolts, nuts, etc.) to replace old landing gear components and get my fifth wheel operational. I replaced everything at my campsite. Parts arrived in 3 days, matched perfectly, and were of excellent quality. Direct contact with James R. of etrailer guaranteed the correct kit for my fifth wheel. Terrific service, reasonable prices, and convenient delivery options continue to be a hallmark of etrailer. They are definitely my go to source for all things RV. Thanks for being there and your expertise with RVs and trailers!
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
After talking to the experts at etrailer they helped me find a complete landing gear set (2 landing legs, feet, motor, gear box, switch, connecting arm, crank) to replace my original 2005 Jayco 5th wheel that I could not get OEM replacements or parts for. we settled on the LG-1. it was almost o perfect fit. I have never replaced landing gear before. I was one of the easiest projects I have done in a long time. The only modifications I had to do was cut a gap for the new gear connecting rod and manual jack crank arm to go through. It took about 5 minutes for both. The whole project took about 1.5 hours. Everything works perfectly.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
I would recommend to anyone who needs parts for their travel trailer.
Etrailer keeps you informed on the progress of your order and if you have any issues they resolve it asap.
Great place to do business with.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Before I purchased my Stromberg Carlson Camper Jacks I messaged your company to request information on my project and how I was going to use the jack system. Unfortunately I received no response from your company but purchased the jacks anyway and installed them on my project to complete it.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
These jacks were a direct bolt-on replacement for the Atwood jacks on my fifth wheel. One year later, they are working fine. When considering this purchase, it was not clear if the landing gear would fit or if welding would be necessary. I called Stromberg-Carlson and they sent the technical drawings right away. Answered the question immediately. I will never forget their fine customer service.
Jon G - 10/13/2020 Steve W - 09/27/2021Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Perfect fit and easy installation, packaging from manufacture could be better first box was broken open in shipping and most parts gone second one end had broken open and had to be retapped.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
With a few minor modifications, I mounted the landing gear on our 1998 5th wheel and all is well. Has worked flawlessly since. Thanks for the fast delivery and great service.
Lane J - 12/12/2021Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Great!!!’
Landing gear Installation went very smooth!
etrailer customer service... is~2nd to none!
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Nice direct fit easy install and work w ell
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
We installed the landing gear for our Montana.... it was a perfect fit. We highly recommend you. Thank you
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
The motor on my 2002 Carriage Cameo landing gear went bad. This motor is louder than the original one was but it is also faster than the original one. The legs are a couple of inches shorter but not hard to work with. I do most of my own work on my vehicles, so found them easy to install.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Perfect replacement for my OEM Landing Gear. eTrailer Saved my RV Trip! Fast Shipping unbelievable service to ensure I had the correct gear for my RV. In addition, eTrailer had the best value for my money.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Jacks are good. Exact model that was OEM with the trailer. Let's see how long these last.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
This landing gear was perfect for my trailer. They are really strong and can lift just about anything. I will say though, they are very slow. The electric motor isn't all that slow but doing it by hand takes a long time. But that's just a backup anyways.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
First of all I want to say that any of the following comments by me is NOT a reflection on etrailer.com whose support and product shipping has been excellent. It is more as a informational thing than anything. I installed this unit on my 2007 28' Thor Transport toy hauler after it fell off the jacks and destroyed the landing gear (that just made me so happy, you just don't know the joy..). My first comments are for Thor, I want to thank them for the absolute cluster (you know what) of an install of the original gear. Totally inaccessible and the worst engineered and assembled garbage ever. The original gear was tack welded at the stops and the carriage bolts for the mounting brackets were installed so that you could not remove them, they all needed to be cut off, a real dream job in an inaccessible location. In addition, I had to remove the 5500 onan generator and the (2) 7.5 gallon propane tanks and the sheet metal enclosures and doors. Next I would like to thank Lippert and Stromberg Carlson for continuing their questionable design of these legs which are only supported by one tab (on the legs) and one bracket on each leg in the load bearing direction (the other tab supports the leg when in the non-load bearing position. And for the 2 extra bolts (1/4-20 x 1 1/2" with jam nuts) that no one seems to know where they go. Also, there is a lot to be desired with the instructions, but that's just me I guess. Be sure to accurately measure your existing brackets prior to getting started because this could be a game changer if they are off by more than a 1/4" or more, you would have to have your brackets cut off and re-welded. As for my Thor, they were off by about 1/8" and I was able to grind off the bottom of the lower tab (on the leg) to make them fit into my existing brackets. After completing the job (3 days in 105 degrees) I still have some questions about the carriage bolts that were shipped, if I were to do it again I would change the bolts to a much stronger bolt, but it's to late for me now. Etrailer had the best price and fastest shipping and were very helpful, would I buy again from them, you bet...
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
Thank you Shery and etrailer for reordering, at the same price, the LG-1 so it would arrive on time.
It works great on my 2004 Montana. I did have a problem with lining up the the legs to the already welded on brackets, but with a minamum amount of ajustment (some filing of bolt holes and hammering on leg) I was able to secure solidly. My decision to replace the entire landing gear assembly in stead of just the broken lead leg was based on the age of my RV and the cost to do so (it was a great price). I will continue to use your service in the future and reccomend it to anyone I can.
Thanks again for the great service.
Review from a similar Deluxe Electric Landing Gear in Camper Jacks
I purchased this landing gear to replace the RBW landing gear on a 1998 Mallard made by Fleetwood. Only one side of the RBW was bad, but I was unable to find parts to repair it. I had to weld new brackets to the legs to match the existing U brackets that were already welded to the frame of the 5th wheel. Everything went smoothly with the installation until I went to hook up the square tubing for the cross bar that ties the legs together. The tubing was about 8" too short to reach from one leg to the other. Luckily I was able to use the cross bars from the original RBW gear. I am not sure why the Stromberg Carlson cross bar was so short because my 5th Wheel is a standard width. Other than that it looks like a good product.
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.