Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2

Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2

Item # JSC-24

lowest price pledge

Retail:$82.33

Our Price: $75.01

You Save: 9%
Camper Jack

Orders above $99 qualify for Free Shipping

Shipping Weight: 27 lbs

Quantity: 
In Stock, Ships Today
Stromberg Carlson Camper Jack - JSC-24
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Leveling Jack
  • Stabilizer Jack
  • Scissor Jack
  • 10000 lbs
  • Stromberg Carlson
  • 24 Inch Lift
  • Bolt-On
  • Weld-On
These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. Call 800-298-8924 to order Stromberg Carlson camper jack part number JSC-24 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2. Camper Jack reviews from real customers.


  • All Info
  • Reviews (87)
  • Q & A (31)
  • Videos (2)
  • Photos
  • Why etrailer?

Stromberg Carlson Camper Jack - JSC-24

These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.


Features:

  • Raises, lowers and stabilizes camper
  • Remains steady on soft surfaces because of wide bow-tie base
  • Bolts or welds on
  • Includes 2 steel jacks and 1 crank handle


Specs:

  • Capacity: 5,000 lbs per jack
  • Extended height: 24"
  • Retracted (collapsed) height: 4"
  • 1-Year limited warranty


Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.



JSC-24 Stromberg Carlson Scissor Jacks - 24" - Set of Two







Video of Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Stromberg Carlson Leveling Scissor Jack Review

Speaker 1: Today you'll be getting a look at and seeing how to install the Stromberg Carlson Leveling Scissor Jack Set, with a quantity of two, part number JSC-24. They're also available in a quantity of one, with part number JSC-24-IND.You can bet on this pair of jacks. These scissor jacks from Stromberg Carlson are great for stabilizing and leveling your camper. As you can see, if your trailer is out of level, you can use your scissor jacks to level it. Check it out. Much better.

As you can see, without your scissor jacks engaged, there's a lot of movement in your trailer. With your scissor jacks engaged, all that extra movement is gone. They're adjustable between four and 24 inches and they have a 5000 pound weight capacity per jack. You can easily raise and lower them with the included crank handle. It's going to work out great on most surfaces.

As you can see, we're on concrete here. The bow-tie base is going to keep it steady even on soft surfaces.They're a bolt-on or weld-on installation. We'll go ahead and show you how to bolt them on now. Here you can see our old rusted out stabilizer jack. It's bent.

We're going to be replacing it. I've gone ahead and removed the old stabilizer. Let's bring in our new one. With our new one, you can see it's got multiple mounting locations. It's completely universal.

Now, you may or not be able to use your same mounting holes and locations. What you need to do is hold it up and figure out where it's going to work best. Now, once you've found a good location to install your stabilizer jack, you want to be sure that you can still easily access your drive nut, which is going to raise and lower your stabilizer jack.You'll want to raise your jack up to where it's making contact with your frame where you want to install it. Then you can mark your holes. Now, there are six holes on each side. I'm only going to be using four total, two on each side. You can use whichever holes work out best for you. Once you've got your holes marked, go ahead and move the jack out of the way, and then you can begin drilling out your holes. I'm going to be drilling out quarter-inch holes. If you'd like to, you can use a pilot bit and then drill out your final size. All right. With all those drilled out, you can go ahead and install your stabilizer jack. You will have to provide your own hardware.I'm just using some quarter-inch bolts with some flat washers and lock nuts. Now you can bring your jack back in and align your holes. Now you'll just loosely install all your hardware. Now we can tighten up our hardware. Now you can raise up your jack and it's ready for when you need it. That's going to complete your look at the Stromberg Carlson Leveling Scissor Jack set.


Customer Reviews

Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2 - JSC-24

Average Customer Rating:  4.8 out of 5 stars   (87 Customer Reviews)

These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

- JSC-24
by:

These are great - they fit the existing mounting holes in the frame (26' Jayco) so they were super easy to install and they function nice and smoothly. 635743



- JSC-24
by:

Installation was easy. Parts are good quality. These don't come with the bolts. I had to drill new holes since the old ones didn't line up. 613633



- JSC-24
by:

PLEASE, do yourself a favor and DO NOT buy these jacks... These are cheap Chinese crap. I'm not really sure what they think there good for ie; don't Jack a frame or axle. WTF? Right out of the box they are a good looking piece of equipment. Don't be fooled. These Jack are incapable of lifting 50% of stated load. And quite frankly, etrailer customer service was rude when contacted. Don't say nobody warned you! 663947


Comments

Were sorry to hear that you werent happy with your purchase. As stated above in the product description, the jacks arent designed to lift your trailer or RV. Doing so will exceed the capacity of the jacks. They are meant as stabilizers to prevent the trailer from rocking or bouncing around from people walking around in it.

-- Mike L - 07/01/2019

57338

- JSC-24
by:

It has held up where the ones that came with the camper failed 504650



- JSC-24
by:

Great item, heavy duty and good price. Will do business again 665691



- JSC-24
by:

I have received the scissor jacks and they are very well made. Iā€™m going to install them today. Thanks for Great service and great product. 664330



- JSC-24
by:

Excellent service and products! 663236



- JSC-24
by:

The rear OEM stabilizer jacks on our trailer were nothing but rust after just 5 years. They had never worked well, either, so I was happy to replace them with heavier Stromberg-Carlson jacks. Etrailer had the replacements in shipment the same day I ordered them, and they arrived quickly and in perfect condition. Removing the old jacks took a bit of work, but replacing them was quite fast and easy. It was easy to tell by weight and feel that I was using a far superior product, and although they haven't been field tested yet, I'm sure that they'll do a better job for a much longer time than the OEM equipment. 647595



- JSC-24
by:

Fast shipping, and product was better than OEM! Used them this weekend and they worked great! 647589



- JSC-24
by:

Our products that we buy from etrailer work great. Just what we needed. They arrived fast. We always purchase from etrailer as their customer service in helping you with the products is the best.. 635856



- JSC-24
by:

Would recommend upgrading your factory jack to this Leveling Scissor Jack set. Much easier to level trailer and more durable then factory jack. Quick Shipment and easy install had us back camping quickly. Thank You etrailer. Great company, great product. 620111



- JSC-24
by:

These were easy to install and work per fect. 619584



- JSC-24
by:

Products purchased were good quality comparable to original equipment. 615518



- JSC-24
by:

Excellent product. 613465



- JSC-24
by:

These jacks worked out great. Replace old single foot OEM jacks that kept benting on a 2005 Outback trailer after flipping the axles for better ground clearance. Would recommend these to anyone looking for a solid jack. 604042



- JSC-24
by:

. 591169



- JSC-24
by:

Very easy to install. could stop carrying around all those wooden support blocks. 588269



- JSC-24
by:

They work great......better than the or iginals! 567842



- JSC-24
by:

Jack arrived right away and in shape. I got it installed and it is looking good. Right now the trailer is parked in our yard but the jack is doing the job - nice and sturdy. It works smoothly and easily. 557641



- JSC-24
by:

Your service and products are the best! Very impressed with the speed of delivery! 557072



- JSC-24
by:

Very nice jacks and they fit just like a glove,Thaks 556031



- JSC-24
by:

Although these are sharp, heavy items, they were well packaged and delivered in perfect shape along with some smaller items. They are a perfect fit and direct replacement for the ones that came on the trailer...(which I dragged and bent). Four bolts per and I am good to go! 549341



- JSC-24
by:

I haven't install the jacks yet. I can't wait. Sick of my old rusty ones. They look great and were packaged well by etrailer. Got here quick. 524772



- JSC-24
by:

The jacks were exactly as advertised and installation was easy and straight forward. Shipping was also very good. 516763



- JSC-24
by:

Good product. This scissor jack is rated at twice what my original jacks are and there is certainly a difference in stability and quality. I had to drill new holes on my frame to mount them. Used 3/8ā€ self drilling screws on an 11/32ā€ hole. All on all, very satisfied with both the product and the customer service I received from etrailer! 515521



- JSC-24
by:

Exactly what I was looking for. Wonderfully constructed product. The Leveling Jack Set makes my camper look new. Very nice experience. Thanks etrailer! 509608



- JSC-24
by:

perfectly fits the bolt pattern on my connect spree 25. 504739



- JSC-24
by:

exactly what I wanted proper measurements everything exact delivered when it was suppose to be thanks. 500710



- JSC-24
by:

An upgrade replacement for our RV. Good quality & price. Order shipped fast. 491294



- JSC-24
by:

In place now and helped with balance. Thanks for the quick delivery. 475129


Comments

Fine, serves the purpose.

Charles - 02/16/2019

49570

- JSC-24
by:

I received the products very quick I haven't had time to install them yet but am looking forward to it. Thanks e trailer 466627



- JSC-24
by:

Much better product than the ones that came with my RV trailer originally 446960



- JSC-24
by:

Excellent products and Service. 473621



- JSC-24
by:

they were easy to put on and held up pe rfectly 434051



- JSC-24
by:

I ordered the ultra 3502 for my camper and the parts came in very fast and was a very simple insulation and worked great. I would also like to say that I needed help finding another part for my camper and was not able to find in on the site so I called etrailer and the help was great thanks etrailer 429965



- JSC-24
by:

I don't know about the product yet but, Michelle S. is the greatest. Denny 424268



- JSC-24
by:

Fantastic transaction and just what I e xpected. 421357


Comments

Im glad that I made the purchase of your camper jacks, they were the perfect thing for stabilizing my camper better.

Hal C - 08/20/2018

42558

- JSC-24
by:

Jacks are way heavier than oem ones on trailer previously. Easy ordering and fast to my door, 2 days! None of this crap of ups to us postal taking 10 days to travel 3 states. Never a bad experience with etrailer and there website is always informative. 404990



- JSC-24
by:

Fast easy install 397404



- JSC-24
by:

Pair of these welded on the rear of my trailer - handiest way ever of leveling the trailer whenever its detached from the tow vehicle in a paddock for a race weekend. 390480



- JSC-24
by:

Received in a timely manner, and I was very happy with the product. 379016



- JSC-24
by:

Items were what I order fit perfect 374699



- JSC-24
by:

Have not installed yet but I got what I was expecting 327217



- JSC-24
by:

Easy to install and use. Adds stability over factory installed jacks. Quality is good. 325503



- JSC-24
by:

Received shipment next day after ordering...no added charges. Shipping package arrived in excellent condition. Scissor jacks look good and work smoothly. 315729



- JSC-24
by:

Well made 309311



- JSC-24
by:

Great heavy duty replacement for OEM stabilizer jacks. Easy to install. Had to drill a couple of new hole in the frame, but I don't think that is unusual. Used self tapping screws. Excellent product. 291294


Comments

No problems. Product works great.

Bob C - 09/06/2017

27941

- JSC-24
by:

We bought these to put on our vintage 1948 Spartan Manor travel trailer, the old fashion type are cool, but as we are getting older we are getting tired of climbing under the rig to put them up. These scissor jacks are awesome!! They mounted beautifully and look really nice. We are very pleased with their quality and ease of use. 290934


Comments

Working just fine, plan on buying two more for another trailer.

Sue R - 09/03/2017

27887

- JSC-24
by:

works perfect , easy to use . 286864



- JSC-24
by:

Fantastic value for the price. These things are amazing. Can lift more than expected with minimal effort. Recommend to anyone needing to upgrade their old jacks or who want more clearance when camping. 264058


51
88
Show More Reviews

Ask the Experts about this Stromberg Carlson Camper Jack

Do you have a question about this Camper Jack?


  • Replacement Scissor Jack for a 2017 Rpod 179 Hood River Edition
  • While I do not know which specific jack make and model came on your Rpod originally you can install pretty much any other similar jack, such as Ram Scissor Stabilizer Jack # TJSC-24, as a replacement. The mounting holes likely will not perfectly line up but it wouldn't take much effort to add a new hole or two to properly install the jack. Since the original was also welded I do recommend doing the same with the new jack. Any welding should be done by a professional welder.
    view full answer...

  • Can Ultra-Fab Power Twin II Stabilizer Jacks be Used on a 2017 Minnie Winnie 31K
  • The Ultra-Fab stabilizers # UF39-941705 and # UF39-941704 are very similar and have all of the same specs. But there is one important difference. Set # UF39-941704 is manually operated and # UF39-941705 comes with 2 motors for electric operation. It might be possible to install a set on your 2017 Minnie Winnie 31K but there isn't a lot of space on the underside of that RV so it is possible, even likely, that the stabilizers will not fit. When fully retracted the stabilizers will hang...
    view full answer...

  • Comparing Trailer Jacks and Stabilizers
  • Jacks and stabilizers differ in that jacks like # PSEA20000103 are intended to lift part/all of the trailer tongue weight while stabilizer jacks like Ultra-Fab Ultra Scissor Jacks # UF48-979002 are intended to support weight and prevent motion (but not to do actual lifting). Even though these stabilizers are each rated for 6500-lbs (far more than your camper's actual weight) you do not want to use them to lift the trailer. Keep in mind that the mounting point where you install them also...
    view full answer...

  • Recommended Leveling Stabilizers to Reduce Bounce When Walking in Trailer
  • It sounds like your leaf springs are not the issue and changing your springs to a higher capacity could cause a rougher ride when traveling. The bounce or sway has to do with how you set your stabilizer legs and it sounds like they are not supporting enough weight. If you still experience an annoying amount of movement after you add additional load to your stabilizer legs, then you should add additional stabilizers. If you have a slide out, this is really common and you can add a stabilizer...
    view full answer...

  • Is Mounting Hardware Included on Stromberg Carlson Trailer Jack , # JSC-24.
  • The Stromberg Carlson Trailer Jack, # JSC-24, does not include any mounting hardware. It can be bolted or welded on to your trailer. If it is being bolted on we recommend grade 5 bolts, with washers and locking nuts.
    view full answer...

  • How to Use Power Drill to Make Raising and Lower Scissor Jacks for Camper Quicker
  • Yes, you can use a drill to make raising and lowering the scissor jack set part # JSC-24 a bit quicker. You'll just need the drill adapter part # UF48-979005 too and you'd be set. This basically is a socket attached to a power drill shank. The size socket that comes with this is 3/4 inch. See review video I attached for this as well.
    view full answer...

  • Can Leveling Jack be Used to Lift Wheels off the Ground?
  • A leveling jack such as # JSC-24 is not designed to lift your trailer off the ground, it is only meant to provide support to your camper. To change a tire on your trailer you would want to use a bottle jack such as # ALL620471. I've added a link to video reviews of this product for you to take a look at.
    view full answer...

  • Scissor Jack Recommendation to Replaced Damaged Ones on R Pod Trailer
  • For a pair of stabilizer jacks that would have more than enough capacity that would work well on your R-Pod I would recommend the Stromberg Carlson Trailer Scissor Jacks part # JSC-24. These have a 5k capacity per jack and would do a great job as long as you just use them for stability like you said you would. Check out the review video I attached for more info.
    view full answer...

  • Timbren Axle-Less Suspension for a Home Made Tear Drop Trailer Build
  • The Timbren Axle-less suspension system that is going to work best for you depends on the capacity you need. But it sounds like you are looking for a straight spindle and not a drop spindle so that narrows things down some. For a 3,500 pound capacity we have # A35RS545. Hubs are included. Also for 3,500 pounds we have # A35RS545E which includes hub and drum assemblies for electric brakes. For a 2,000 pound capacity we have # A20RS545. EZ lube hubs are included. All of the included...
    view full answer...

  • Looking For Scissor Jack with Mounting Holes in Feet
  • The Ultra-Fab # UF48-979006 scissor jack only has holes in the top mounting surface, as it's intended to be mounted to the underside of a camper or trailer. Stromberg Carlson has similar jacks, part # JSC-24 that has mounting holes on the foot of the jack as well as on the top. If you look at the photo I provided, you can see a detail of the mounting holes on both jacks.
    view full answer...

  • What is the Difference Between a Stabilizing Scissor Jack and a Leveling Scissor Jack
  • There is no difference, that is just what the manufacturer decided to label it as. They both do the same job. Both Leveling Scissor Jacks, like part # JSC-24, and Stabilizing Scissor Jacks, like part # TJSCHD-24, are used to keep your RV level and stable. The only thing that you really need to keep an eye on is the weight capacity of each as these kinds of jacks are not meant to lift weight, just to hold it.
    view full answer...

  • Mounting Hole Dimensions for the Ultra-Fab Ultra Scissor Jack # UF48-979006
  • I attached a picture that shows all of the dimensions of the mounting holes on the top of the # UF48-979006. This jack does not have mounting holes on the bottom of it. I am not sure what product you have in front of you, but it may be a similar jack like # JSC-24 that does have holes on the bottom of it. Things don't get normally mounted to the bottom of stabilizer jacks like these.
    view full answer...

  • What Type of Stabilizer Jack Can be Used on a 5th Wheel Trailer with a Gooseneck Adapter
  • If the trailer is a 5th wheel trailer, but you are using a 5th wheel to gooseneck adapter, you would need to use a gooseneck trailer stabilizer like # UF19-950400. The adapter would couple around the ball on this tripod. It has a 1,200 pound capacity and is adjustable from 33 to 43 inches tall. If the trailer is too heavy for the 1,200 pound capacity, you could use something like the Leveling Scissor Jack Set, # JSC-24, under the trailer at the front. The jacks each have a 5,000 pound...
    view full answer...

  • Can the Leveling Scissor Jack Set # JSC-24 Lift a Trailer
  • The Leveling Scissor Jack Set, item # JSC-24, is designed as a leveling, stabilizer jack, that is to be bolted to the frame of the trailer. If you could find a location close enough to the wheel and tire to mount the jack securely, then the 5,000 pound capacity of the jack could be used to do maintenance or change a tire on a 4,000 pound trailer. Mounting the jack at the corners of the trailer would most likely not provide enough lift for this application. These jacks are not designed...
    view full answer...

  • Troubleshooting Electric A-Frame Trailer Tongue Jack, # JET-3555 Blowing Fuses
  • You should be able to manually crank the Electric A-Frame Tongue Jack, # JET-3555, up and down by removing the rubber plug on the side and inserting the manual handle or a properly sized socket wrench. Turn clockwise to extend the jack and counter-clockwise to retract it. I spoke with one of our installers about the fuses blowing. He stated that the power wire could be shorting to ground or there could be an internal component that is shorting out. Make sure all ground connections are...
    view full answer...

  • Is Lippert Scissor Jack Set # JSC-24 Strong Enough for Trailer with 16,000 Pound GVWR
  • Using both scissor jacks included with the Lippert Jack Set # JSC-24 will give you a combined weight capacity of 10,000 pounds. Because scissor jacks are only designed to stabilize a portion of the trailer's weight and not its full GVWR these will be plenty strong enough for your 5th wheel camper that typically weighs 12,800 pounds at most. Even if you were to creep up towards the trailer's 16,000 pound GVWR these would still be sufficient. These jacks feature an extended height of...
    view full answer...

  • Availability of Stabilizer Jacks for a Winnebago View
  • The Stabilizer Jack you were looking at, part # TJ01RT can be permanently mounted. Each jack has a 1000 lb capacity. We also offer Scissor Jacks that can be bolted into place. Part # JSC-24 includes 2 jacks with a 5000 lb capacity for each.
    view full answer...

  • Recommended Jack Stands to Elevate Boat and Trailer for Storage with Weight Off Tires
  • For your boat trailer, to keep the weight off the tires for storage, I recommend the 2-Ton Jack Stands - Qty 2 # PTW41021. Each jack can hold 4,000 lbs, but I recommend using 4 of these spaced as evenly as possible to keep the weight off the wheels and then just use the trailer jack for a 5th point of support and balance.
    view full answer...

  • What are the Dimensions of the Jack and Handle in the Leveling Scissor Jack Set, # JSC-24
  • I went out to the warehouse to measure a jack and handle included in the Leveling Scissor Jack Set, # JSC-24. When compressed, the distance from the end of the crank bolt head to the center of the jack (between the two brackets) is 13-7/16 inches. When extended, it is about 4 inches. The brackets measure 3-11/16 inches long by 3-3/16 inches wide by 1-3/4 inches tall. The 2 outside round holes on each bracket are 5/16 inch diameter and 1-1/2 inches apart on center. The 4 elongated...
    view full answer...

  • Where Should Stabilizing Jacks be Installed on a Winnebago View
  • The stabilizing jacks, like the Stromberg Carlson Leveling Scissor Jack Set # JSC-24, on your Winnebago View should be installed on the rear corners of your vehicle. Since the front and mid section are stabilized by the axles, the rear corners are where stabilizing jacks need to be installed. If you do not already have stabilizing jacks then I highly recommend going with the Stromberg Carlson set that I just referenced. They can support up to 5,000 lbs, have an extended height of 24",...
    view full answer...

  • Is the Leveling Jacks part # JSC-24 Compatible with Saveajack System
  • We do not carry the Saveajack system, but the Leveling Jacks part # JSC-24 that you referenced are compatible with it.
    view full answer...

  • What Are The Mounting Bracket Dimension Of The Leveling Scissor Jack Set Part # JSC-24
  • I do have a way to determine whether or not the Leveling Scissor Jack Set part # JSC-24 will bolt onto the existing brackets on your camper, however, as we do not have access to the mounting bracket dimension on your 2014 R-Pod Model 177 Camper, you will need to do a bit of measuring in order to ensure an exact fit. In order for these jacks to work, a 24" lift and 5,000 lb. weight capacity will need to be sufficient for your trailer. In addition to these specification, you will also...
    view full answer...

  • Would 2 Sets of Leveling Scissors # JSC-24 Be Able to Stabilize a 6,000 lb Camper Trailer
  • Leveling scissor jack set # JSC-24 can support 5000lbs. If you had two sets of these, one on the front of the camper and another on the back of the camper, in addition to the four existing jacks on your camper, you would be able to stabilize and support your trailer that weighs 6000lbs. Each set of these can handle 5000lbs, so if you had two sets you could easily handle the 6000lbs of your trailer.
    view full answer...

  • Additional Mounting Hole Measurements for Stromberg Carlson Scissor Jacks
  • I went out to the warehouse and pulled a scissor jack from set # JSC-24. I took several measurements and included a picture of them for you. From the near edge to the centerline at the two smaller holes it is 3/4 of an inch. From the center of the slotted holes to the furthest edge it is 2-1/2 inches and to the nearest edge it is 1-5/16 inches. And from the center to the edge to the left or right it is 1-5/8 inches.
    view full answer...

  • Dimensions of Trailer Side Mounting Plates on Stromberg Carlson Scissor Jack # JSC-24 and # JSC-30
  • To determine if this jack will fit your Fun Finder trailer you will need to measure the location of where you will be installing the jacks on your trailer. I went out to our warehouse and measured the mounting plates on the Stromberg Carlson jacks. The Stromberg Carlson Scissor Jack, part # JSC-24, has a trailer side base plate measurement of 10-1/4 inches in length and 3-1/4 inches in width. Each individual mounting plate would measure 3-1/4 inches wide x 3-3/4 inches length. The...
    view full answer...

  • Recommendation for a Jack with at Least 3,000 Pound Capacity for a Brush Hog Mower
  • Have you considered something like a scissor jack, # JSC-24. You would attach this to the bottom of a flat surface. When fully retracted, it hangs down only 4 inches. These jacks are sold in pairs. For a single jack, it is # JSC-24-IND. If you can tell me what type of mounting surface or bracket you have on the mower, I might be able to find a better option for you.
    view full answer...

  • Cost and Availability of Stromberg-Carlson Leveling Scissor Jack Set # JSC-24
  • We offer the Stromberg-Carlson Leveling Scissor Jack both singly, part # JSC-24-IND, and as a set of two, part # JSC-24. Both stock availability and pricing can be seen on the two product's pages, which are linked for your reference. These jacks offer a 5000-lb capacity and can be bolted or welded in place.
    view full answer...

  • How Long Are the Stromberg Carlson Camper Jacks While Retracted
  • The width or length if you will of the Leveling Scissor Jack Set part # JSC-24 while completely retracted is right at 25-1/2" long. I went out to our warehouse to measure this for you. This measurement is going to be fairly standard across scissor jacks.
    view full answer...

  • Will A 3/4 Inch Socket Fit To Raise And Lower Stromberg Carlson Leveling Scissor Jack
  • I walked out to our warehouse and measured the Stromberg Carlson Trailer Jack Set, part # JSC-24. On the end of the jacks that turns to raise and lower the jack it measured 3/4 inches on each jack. Yes, you can use a 3/4 inch socket to raise and lower each jack, or use the included arm with 3/4 inch end. I contacted our representative at Stromberg Carlson and she informed me that they do not have any brackets or shields that mount next to the jack to protect it.
    view full answer...

  • Does Stromberg Carlson Camper Jack # JSC-24 Use Stamped Construction
  • The Stromberg Carlson Camper Jack # JSC-24 uses a solid nut to engage the threaded shaft that lifts the jack. The main structure of the jack is stamp-formed.
    view full answer...


Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Dustin K
Installed by:
Hayden R
Photos by:
Zach O
Updated by:
Sarah W
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.