Pro Series Square Swivel Jack w/ Round Pipe Mount - Sidewind - 10" Lift - 5,000 lbs

Video Transcript for Pro Series Trailer Jack - Side Frame Mount Jack - PS1400860383 Review

Today we'll be reviewing part number PS1400860383. This the Pro Series Square Swivel Jack with the round pipe mount rated at 8,000 pounds. This does have a superior side-load capacity when compared to round jacks. The square design is going to provide additional support for side loading. We also have the nice tubular swivel design that's going to let you swing the jack up for travel and down for use. It does have the included inaudible 00:00:27 pin that's going to hold the jack in place. Your weld-on pipe mount is going to be the portion that's going to be welded onto the frame of your trailer and it's going to give us an outside diameter from edge to edge of right around 2 inches. You can see how when this would be stationary, since it spins freely inside the jack, that also means that our jack is going to spin freely around the pipe mount, so it is going to allow us to move it to those different positions, whether it's a stored position or an upright position to support or lift our trailer. This has a durable long-lasting steel construction.

The outer tube has a nice black paint finish and the inner tube is zinc plated to help it stand up against rust and corrosion. The side-wind handle has a smooth ergonomic design for easy cranking. It's going to provide us with a handle radius of right around 7 inches. The fixed leg jack does have an integrated foot plate and our foot plate is going to measure 7 1/2 inches by 4 inches. Again, this is a weld-on install and the round pipe mount is included. Couple different measurements I want to go over with you real quick.

This jack is going to provide us with an overall length of right around 24 inches. Now measuring from the center of the pipe mount to the base of our jack, we're going to have a retracted measurement of 17 1/8 of an inch. I have another jack here that's moved into the fully extended position. We can go ahead and do that measurement as well. With the jack in the fully extended position measuring from the center of our pipe mount to the bottom of our foot plate, we're going to have a measurement of 27 1/8 of an inch. If we subtract the retracting measurement from the extended measurement, we're left with about 10 inches, which is where we get our lift or clearance measurement from.

The measurement from the center of our pipe mount to the top of our jack is going to measure about 7 and 5/16 of an inch. That's how much clearance we have to work with from the mounting bracket to the top of our jack. This jack is going to provide a lift capacity of 5,000 pounds, with a static capacity of 8,000 pounds. That's going to complete today's review of part number PS1400860383. This is the Pro Series Square Swivel Jack with a round pipe mount rated at 8,000 pounds. .