1. Trailer Jack
  2. MaxxTow
  3. Side Frame Mount Jack
  4. 1500 lbs
  5. Sidewind Jack
  6. No Drop Leg
MaxxTow Round, Swivel Trailer Jack w/Dual Wheels - Sidewind - 11.5" Lift

MaxxTow Round, Swivel Trailer Jack w/Dual Wheels - Sidewind - 11.5" Lift

Item # MT70149
lowest price pledge
Retail:$111.67
Our Price: $47.50
You Save: 57%
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 20 lbs
Quantity: 
MaxxTow Side Frame Mount Jack - MT70149
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Corrosion-resistant zinc plating makes this jack great for marine use. Spring-loaded handle lets you easily swing jack up for travel and down for use. Dual wheels offer support and simple maneuverability. Fits trailer tongues up to 4". Lowest Prices for the best trailer jack from MaxxTow. MaxxTow Round, Swivel Trailer Jack w/Dual Wheels - Sidewind - 11.5" Lift part number MT70149 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (313)
  • Q & A (71)
  • Photos
  • Why etrailer?

MaxxTow Trailer Jack - MT70149

  • Side Frame Mount Jack
  • 1500 lbs
  • Sidewind Jack
  • No Drop Leg
  • Bolt-On
  • MaxxTow
  • Swivel Jack - Pull Pin
  • With Wheel
  • 12 Inch Lift

Corrosion-resistant zinc plating makes this jack great for marine use. Spring-loaded handle lets you easily swing jack up for travel and down for use. Dual wheels offer support and simple maneuverability. Fits trailer tongues up to 4".


Features:

  • Marine jack supports, lifts and lowers your boat or recreational trailer
  • Convenient, spring-loaded handle lets you easily swing jack in place
    • Pivot up to stow parallel to trailer tongue for travel
    • Move back into upright position for use
  • Corrosion-resistant zinc finish
  • Sturdy steel construction
  • Dual thermoplastic wheels provide support and simple maneuverability
  • Sidewind crank
  • Bolt-on installation - hardware included


Specs:

  • Application: trailer tongues up to 4" tall
  • Bracket height:
    • 14-3/4" Retracted
    • 26-1/4" Extended
  • Lift: 11-1/2"
  • Lift capacity: 1,500 lbs
  • Wheel dimensions: 6" diameter x 2" wide
  • Mounting bracket dimensions: 6-1/2" wide x 5-1/2" tall
  • 90-Day warranty


70149 Maxx Tow Swivel Marine Jack - 11-1/2" Lift - 1,500 lbs






Customer Reviews

MaxxTow Round, Swivel Trailer Jack w/Dual Wheels - Sidewind - 11.5" Lift - MT70149

Average Customer Rating:  4.7 out of 5 stars   (313 Customer Reviews)

Corrosion-resistant zinc plating makes this jack great for marine use. Spring-loaded handle lets you easily swing jack up for travel and down for use. Dual wheels offer support and simple maneuverability. Fits trailer tongues up to 4".

- MT70149
by:

So glad I got the MaxxTow Round, swivel jack for my cargo trailer. Previously I had to remove the foot plate at the bottom of the tongue jack because if I had to go over uneven ground or driveway dips, the jack would bottom out. Now I just have to swing the jack up and no more worries!



- MT70149
by:

Thanks for delivering a product that is a just as advertised. Functional and EASY to install. It is a good replacement of my old trailer jack.



- MT70149
by:

The trailer jack does not allow the trailer to go low enough to attach to the hitch which is a standard height and has worked well with previous trailer jacks. I had to purchase a different receiver arm to get it to work. I am not happy with the new one as it requires elevating to a very high level and it is more difficult to load up. Also,the double wheels are a big problem as they resist turning even on pavement-they do not turn at all on softer ground. I will be discarding this trailer jack asap.



- MT70149
by:

The swivel trailer jack works great on my trailer. The dual wheels makes moving the trailer easy. I will definitely buy another one when I need on any trailer I have in the future.



- MT70149
by:

Welded jack mounting plate to trailer. Then jack disconnected from mounting plate so that had to be welded back on. Then jack gears broke on top. So jack does not function. The one good thing about this product is the double wheels.


Comments
The jack is covered by a 90-day warranty. Please call our Customer Service folks at 800-298-8924.
-- Etrailer Expert Mike L - 04/17/2019


- MT70149
by:

etrailer is the easiest company’s to work with ! They go way beyond good customer service and would recommend they to anyone



- MT70149
by:

This was a very good purchase. It works perfectly for my boat trailer application. The double wheels are a big plus when having to move the trailer around.



- MT70149
by:

The jack worked well for my boat and trailer which weighs about 7000 lbs, however, I would not recommend using this jack in salt water. After one year it became too rusty to crank. I had to replace with an aluminum jack.



- MT70149
by:

This jack fits my trailer / tow vehicle perfectly. The rear door of my Jeep opens horizontally, so the jack's swing-up feature makes opening the door possible. The relatively short overall length stows nicely against the limited space on the trailer frame. Also, the dual wheels make rolling the trailer into it's storage location by hand much easier.



- MT70149
by:

Serves the purpose. I've found the double wheel is a bit cumbersome as the wheels don't want to move. I am still using though.



- MT70149
by:

These wheels make pulling or pushing my etrailer by hand so easy!



- MT70149
by:

I do not recommend this product. I installed it on my boat trailer. The wheels do not turn easily and bind up. Very disappointed.



- MT70149
by:

Great product at an amazing price. Works perfectly on my trailer.


Comments
Excellent. No issues.
Jay R - 04/07/2021


- MT70149
by:

I ordered my trailer jack Quick delivery real happy and now I get back out to the lakes Shaka



- MT70149
by:

Works as expected - I would recommend this to anyone in need of a very good trailer jack



- MT70149
by:

Arrived on time and installed easily.


Comments
This trailer Jack has worked fine without any problems.
Ryaan - 05/18/2020


- MT70149
by:

The product arrived well packed and with instructions and parts well labeled. Initially I thought it would not fit my trailer tongue since the hole spacing was only 4.5 inches vertically as delivered. However, since the entire mechanism rotates to stow, I found that the width measurement at 5.5 inches made that imagined problem moot. The 18mm nuts on the mounting bolts are significantly larger than the 9/16ths one it replaced and provide a much stronger and solid mount. I'm very pleased with the unit. The 11.5 inch lift gives my trailer the additional height required to connect my truck hitch without the wobble and complications of the entry level unit that it replaced. etrailer made the decision easy and the delivery uneventful. If you have a heavy or large trailer, this unit is a winner......



- MT70149
by:

Shipping was super fast, I had a 30 year old jack that worked so hard, this new jack is so easy to turn and I am 70 years old and even I can move the boat with those duel wheels, all mounting hardware was included, the video's were a great help, I will say this, you won't be misled when ordering product from this company, I felt like they went beyond normal in everything concerning my purchase, thanks.



- MT70149
by:

I was replacing another trailer jack. This one appears to be more heavy duty than I was expecting, very well built...and for a very good price.



- MT70149
by:

Rec'd today ( 10-8) for DEMCO TOW DOLLY... Tongue is at a 30 degree angle! Still working out how I need to modify mounts to put in the position needed. Will try again tomorrow...NOT the jacks fault, just a complicated install. I LIKE THE PRODUCT!!!!



- MT70149
by:

Excellent quality product delivered in timely fashion



- MT70149
by:

Works great. Very heavy duty for heavy rung weight.



- MT70149
by:

Replaced a single wheel jack and it works much better



- MT70149
by:

Dual wheel really doesn’t help. The mount is on the side of the trailer tongue so all the weight winds up on one wheel. Had to replace it with a different wide, single wheel, Jack. Waste ofmoney



- MT70149
by:

Purchased this about a year ago. It arrived quickly and works perfectly. I have some tight quarters when trying to store my motorcycle in my trailer for the winter. I try and get it out of the trailer on those good winter days, so my jack allows me to move the trailer around safely to get the access I need to go riding with minimal effort. Very happy with this jack, very strong when moving the trailer.


28
320
Show More Reviews

Ask the Experts about this MaxxTow Trailer Jack

  • Weight Capacity and Weight of MaxxTow Round Swivel Trailer Jack MT70149
    I'm not sure if you are asking the weight capacity or weight of the MaxxTow Round, Swivel Trailer Jack with Dual Wheels # MT70149 so I'll go ahead and give you both just to cover our bases. This MaxxTow jack has a lift capacity of 1,500 lbs (which means the tongue weight it can lift as opposed to the entire trailer weight), and it weighs 20 lbs. I have added a link below to a video review for you to check out as well of the MaxxTow Round, Swivel Trailer Jack with Dual Wheels # MT70149.
    view full answer...
  • Mounting Brackets for Trailer Jack Similar to MaxxTow # MT70149
    For mounting brackets similar to what you see on the Maxxtow part # MT70149 we have the Fulton part # F500286 which should work for you since this is the type of trailer jack you have.
    view full answer...
  • Can MaxxTow Round Swivel Trailer Jack Be Used With Spare Tire on Trailer Tongue
    It depends on where the spare tire is mounted on the pole tongue if there is enough clearance to use a swivel jack like MaxxTow Round, Swivel Trailer Jack w/Dual Wheels part # MT70149. When retracted the jack measures 26-1/4" overall height and the mounting brackets measure 6-1/2" wide x 5-1/2" tall. You should be able to use these measurements to figure out if you have enough clearance. If you are still unsure you can send me a photo of your setup and I can try to assist you further....
    view full answer...
    Image 1 for Image 2 for
  • Dimensions of the MaxxTow Round, Swivel Trailer Jack # MT70149
    I went and grabbed a MaxxTow Round, Swivel Trailer Jack # MT70149 from our warehouse to get the dimensions you asked for. I found that the distance from the center of the mounting bracket to the top of the jack measures 12-1/4 inches. The handle length is 6-7/8 inches, and the overall height is 26-1/4 inches. I attached these dimensions to the picture you submitted.
    view full answer...
    Image 1 for
  • What is Maximum Frame Dimension the MaxxTow Trailer Jack MT70149 Can Install on
    If your trailer frame is up to 4 inches in height the MaxxTow jack part # MT70149 that you referenced will fit and work well. I attached a picture of this jack installed on a trailer tongue that is 4 inches tall for you to check out.
    view full answer...
    Image 1 for
  • Spare Tire Carrier and Jack Recommendations for a Load Rite Single Axle Boat Trailer
    Yes, there does appear to be plenty of space to mount a spare tire carrier and spare on the tongue of your boat trailer. Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels Item # FSTC1000301 is a popular option. It will hold the tire out from the frame 4-1/2 inches so it will clear the winch stand. On trailer jacks such as # MT70149 the retracted/extended measurements are taking from the center of the jack mounting bracket to the bottom of the jack. So on MaxxTow Round, Swivel...
    view full answer...
    Image 1 for
  • Replacement Side-Frame-Mount Wheeled Jack for Triton Boat Trailer
    Triton boat trailers are usually equipped with a side-frame-mounted swivel jack like the 1500-lb-rated MaxxTow side-wind jack # MT70149, which is a bolt-on design with dual wheels. The highest-rated wheeled jacks of this type have a 1600-lb rating, like the Fulton F2 bolt-on swivel jack # F1413020134. All jacks of this type are shown on the linked page. There are also jacks like # FTJ120W0301 which install using a snap ring that connects the jack to the mounting plate welded on the trailer...
    view full answer...
  • Do Trailer Jacks with Two Wheels Make it Easier to Maneuver a Jack on Concrete
    Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt or gravel easier. A Fulton jack such as # FXPD15L is going to be the better jack compared to the MaxxTow line of jacks. I do recommend going with a Fulton. For a single wheel version use # FXP15L.
    view full answer...
  • Replacement Parts for Shelby 5854A Trailer Jack
    I do have a solution for you, however replacement parts for your Shelby 5854A Trailer Jack are no longer available. I recommend simply replacing your Shelby jack with a similar unit like the MaxxTow Round, Swivel Trailer Jack # MT70149. This zinc plated marine jack has a lift capacity of 1,500 pounds and a total lift of 11-1/4 inches. It is designed for trailer tongues up to 4 inches tall and features mounting bracket dimensions of 6-1/2 inches wide and 5-1/2 inches tall. It is a bolt-on...
    view full answer...
  • Using Weight Distribution Hitch on Trailer with Side-Frame-Mount Jack
    In order to use a weight distribution/sway control (WD/SC) system it is necessary to have room on the trailer A-frame to mount the spring bar lift brackets and the hitch on the tow vehicle must specifically be rated for use with WD/SC systems. The hitch safety sticker will indicate if it is indeed rated for use with WD. As for the jack, it sounds like you have a side-frame-mount jack like # MT70149 or one of the similar jacks of this type shown on the linked page. Some of these, like...
    view full answer...
  • Replacement For Shelby Trailer Jack 5764A Missing Handle
    Since Shelby is no longer in business, and jack handles are not universal, what that means is there isn't a replacement handle available, so your only option is to get a brand new jack. Since the Shelby is a weld-on jack, the best option we have for a replacement is the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301. You will also need Jack Mounting Bracket for Fulton Marine Jack - Weld-On # P9012-00. Of, if you have room on your trailer...
    view full answer...
  • Replacement Trailer Jack Recommendation for Shelby Jack 5854A
    The specific Shelby jack you are looking for is not available from us but for a very similar jack we have the MaxxTow part # MT70149 which uses a similar mounting style, is a sidewind, and has a wheel caster setup.
    view full answer...
  • Recommendation for a Trailer Jack with Dual Wheels for Pop-up Camper with Off Road Package
    A trailer jack with dual wheels such as # MT70149 are generally easier to move around on different types of terrain. I actually recommend a Dutton-Lainson swivel jack # DL22580. It also has dual wheels. It features 12 inches of lift, fits up to 3x5 inch frames, and is higher quality with a much better warranty (3 years). I have linked a video review of this jack for you.
    view full answer...
  • Replacement Jack Recommendation for Replacing Shelby 5764A Jack
    Your Shelby jack that you are looking to replace has a 1,200 lb capacity. The MaxxTow Jack part # MT70149 would be a great replacement jack that has even more capacity at 1,500 lbs. I attached a review video for this jack for you to check out as well.
    view full answer...
  • Recommended Trailer Jack with Lower Retracted Height for Landscaping Trailer
    I looked through our selection trying to find a similar jack to the MaxxTow, part # MT70149, with a retracted height less than 14-3/4 inches and found a couple of good options for you. You didn't say exactly what height you need, however part # MJ-1200B has a retracted height of 12-1/2 inches. The weight capacity is slightly less, at 1,200 pounds but that's probably still plenty for your trailer. It also offers 11 inches of travel which is a 1/2 inch less than the MaxxTow. A second...
    view full answer...
  • Replacement Bolt-On Side-Frame-Mount Swivel Jack to Replace Shelby 5876A8
    The Shelby 1500-lb trailer jack 5876A8 is not available but we do have options in other 1500-lb-rated side-frame-mount swivel jacks. You can see all such products on the linked page. For cost-effective options that offer bolt-on installation consider the MaxxTow # MT70149 or the etrailer # MJ-1500B.
    view full answer...
  • Rolling Pin Sheared on Shelby Boat Trailer Jack
    I do have an option for you but we do not carry any replacement parts for Shelby Boat Trailer Jacks. The Shelby Boat Trailer Jacks have also been discontinued for some time therefore replacement parts will be hard to come by so I recommend just replacing the entire jack. I was not able to find any information on the Shelby Boat Trailer Jack 2561-1 so if you can provide me with some specs I would be glad to help pair you with a suitable replacement. If not I have attached our selection...
    view full answer...
  • Features and Capacity of MaxxTow Round Dual-Wheel Swivel Trailer Jack # MT70149
    The MaxxTow Round Dual-Wheel Swivel Trailer Jack # MT70149 is a corrosion-resistant bolt-on marine jack that can fit trailer frames up to 4-inches wide. It offers a 1500-lb lift capacity, dual wheels for easy maneuvering and a lift range of 11-1/2-inches. The linked video further illustrates its features.
    view full answer...
  • Recommended Caster Wheel Jack for Moving Trailer
    It sounds like you are looking for a side mount trailer jack that features a caster wheel for your trailer. We have a large selection of jacks that should work great for you, depending on the capacity you are needing. For example, the MaxxTow Round Swivel Trailer Jack # MT70149 features a 1,500 pound lift capacity and dual thermoplastic wheels that will provide support and easy maneuverability. This can be bolted to trailer tongues that are up to 4 inches tall. It has a retracted bracket...
    view full answer...
  • Can Trailer Jack # MT70149 Attach to Angle Iron Trailer
    You would have to box the frame to install the trailer jack part # MT70149 as it cannot attach directly to an angle-iron frame.
    view full answer...
  • Recommended Swivel Jack for 2004 Shorlandr Boat Trailer
    for your 2004 Shorlandr trailer, I recommend the MaxxTow Round, Swivel Trailer Jack w/ Dual Wheels # MT70149 for a bolt on option. If you have the welded connection on your trailer, then I recommend the Fulton Bolt-Thru Swivel Marine Jack # F1411300301 or the Snap Ring # FTJ120W0301.
    view full answer...
  • Can Side Mount Jack Install on A-Frame Trailer to Replace A-Frame Jack for Better Ground Clearance
    A side mounted jack that you could pivot up and out of the way for better ground clearance would work just fine. The A-frame location is convenient but in a situation like yours you certainly could go with the side mounted style. For that something like the bolt on MaxxTow part # MT70149 would work great. I attached an install video for this for you to check out as well.
    view full answer...
  • High Capacity Trailer Jack Recommendation with Wheel Caster and Tall Bracket Height
    The jacks we offer with wheels have lower capacities as it's hard to make a wheel as strong as a flat plate like what is seen on the higher capacity jacks. Since jack capacity is based on the tongue weight of a trailer, and tongue weight is typically right at 10 percent of a trailer's total weight the need for a 2,000 lb tongue weight jack is kind of scary to think about. Reason being that the total trailer weight would be around 20,000 lbs which would be nearly impossible to move by hand...
    view full answer...
  • Replacement Jack For MaxxHaul and MaxxTow 1500 lb Trailer Jack
    We don't have any replacement gear kits for MaxxTow and MaxxHaul products. My recommendation is to replace your current jack with the MaxxTow Round, Swivel Trailer Jack w/Dual Wheels - Sidewind - 11.5" Lift # MT70149. At the price of the Jack it makes sense to replace versus repair it which is likely why the manufacturer doesn't offer replacement parts.
    view full answer...
  • Is MaxxTow Swivel Jack Part # MT70149 a Good Choice for K2 Utility Trailer
    The MaxxTow Round, Swivel Trailer Jack w/Dual Wheels # MT70149 that you referenced would do a great job on your K2 Mighty Utility Trailer. It's a really solid jack with a dual wheel setup that's also easy on price too so if this is the type of jack you are wanting it would be the right call.
    view full answer...
  • Recommended Swivel Jack for Magnum Boat Trailer to Replace Broken Shelby Trailer Jack
    For your replacement jack, I recommend the MaxxTow Round, Swivel Trailer Jack w/ Dual Wheels - Sidewind # MT70149. This jack is an easy bolt on installation to replace your broken Shelby Jack. This jack has a corrosion-resistant zinc plating and dual support thermoplastic wheels. I've attached a couple of videos to further assist.
    view full answer...
  • Needing a Jack to Mount to a 5 Inch Tall Frame Rail
    I have a solution for you, however, the jack that you referenced # MT70149 will not fit a 5 inch trailer tongue. The Fulton Bolt-Thru Swivel Marine Jack, # FXP15, will fit 3 inch x 5 inch trailer tongue and has a lift capacity of 1,500 lbs. This Fulton jack is made of galvanized steel for rust protection. In my research, I found using zinc coated steel with aluminum will cause none to very little corrosion damage in warm, humid, or marine climates.
    view full answer...
  • How Well Does the Dual Wheeled MaxxTow Round, Swivel Trailer Jack # MT70149 Work on Gravel
    The dual wheels on MaxxTow Round, Swivel Trailer Jack # MT70149 will work better on loose gravel than a single wheeled jack but not as well as wide stance rubber wheels on something like a trailer dolly # MT70225 or the new Trailer Valet XL # TVXL2. The Trailer Valet in particular has chain driven wheels allow you to crank the handle to move the trailer unlike a regular trailer dolly where you'd have to use pure muscle to move the trailer around. I have linked videos on all 3 parts for you.
    view full answer...
  • Replacement Trailer Jack Recommendation for Replacing Shelby Jack 5854
    The specific Shelby jack you are looking for is not available from us but for a very similar jack we have the MaxxTow part # MT70149 which uses a similar mounting style, is a sidewind, and has a wheel caster setup.
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Sarah W
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.