bing tracking image
  1. Camper Jacks
  2. Bulldog
  3. A-Frame Jack
  4. 3001 - 4000 lbs
  5. Electric Jack
  6. 22 Inch Lift
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black

Item # BD500199
Retail:$642.53
Our Price: $336.95
You Save: $305.58
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 24 lbs
Quantity: 
BD500199 - 3001 - 4000 lbs Bulldog Camper Jacks
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant. 1-636-306-4830 to order Bulldog camper jacks part number BD500199 or order online at etrailer.com. Free expert support on all Bulldog products. Great prices and Fastest Shipping for Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (324)
  • Q & A (0)
  • Photos
  • Why etrailer?

Bulldog Camper Jacks - BD500199

  • A-Frame Jack
  • 3001 - 4000 lbs
  • Electric Jack
  • 22 Inch Lift
  • Bolt-On
  • 1 Jack
  • Bulldog
  • 2-1/4 Inch

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant.


Features:

  • Tongue jack positions quickly and easily with integrated drop leg
  • Powered drive provides quiet operation and efficient use of electrical power
    • No more hand cranking
  • Internal circuit breaker protects the motor from electrical shorts
    • Hook directly to power, no fuse required
  • Spring-loaded pull pin quickly releases the drop leg into position
  • Built-in level has springs for simple, accurate leveling
  • 3 LED lights make it easy to set up at night
    • Side-mounted spot lights are angled rearward to illuminate weight distribution brackets
  • 4" - 6" Overlap of tubes at full extension provides additional support for side loading
  • Easy-to-access on/off and retract/extend toggle switches make for simple operation
  • Corrosion-resistant, sealed, maintenance-free surfaces
  • Easily accessible emergency manual override in case of power loss
  • Black housing with sleek design protects motor


Specs:

  • Bracket height:
    • 9-3/4" Retracted
    • 31-3/4" Extended
  • Total lift: 22"
    • Screw travel: 14"
    • Drop leg travel: 8"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Lift capacity: 4,000 lbs
  • Power wire: 10 gauge
  • 5-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



500199 Bulldog A-Frame Jack with Powered Drive, 22" Lift, 4,000 lbs

Replaces Bulldog BD500186




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black - BD500199

Average Customer Rating:  4.8 out of 5 stars   (324 Customer Reviews)

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant.

by:

Bulldog BD500199 installed on 2006 Jayco Jayflight 27BH. Bought this powered jack to replace the non-functioning electric jack that came with the camper we bought 6mo ago. We’ve been using the manual override on the old one, so having a working jack is going to be great:) Just installed this new unit yesterday, so have only used at home so far, but it seems to work very well. Speed is good. It has the drop leg with spring pin for quick adjustment which is cool. It has a built in light which is fairly bright and should come in handy for setting up at night. Installation was very easy. Literally had the old jack removed and new one in place in about 20mins and that included getting the jack stands set up. The hole in the A-frame was big enough for the larger diameter tube of the Bulldog unit, so no fitment problems. I’ve got photos showing the old unit and new. Forgot to take one with the jack removed. There was additional time wiring, but it was only another 20mins or so. Most of that time was spent deciding on routing and zip tying the wire. There is only one wire that hooks up to the battery positive post and there is an internal breaker in the unit so you don’t wire in an external fuse. Heads up there are no wire terminals in the kit, so you will need to have your own to crimp onto the wire. You’ll need a 10ga connector, likely a 5/16 or 3/8 ring terminal but could vary depending on your battery. The wire lead could have been another 12” longer, but it was just barely long enough to reach the positive post after I flipped the battery around to put the positive post on that side of the frame. Also should note that this unit has a dual mounting pattern that allows for turning the head unit 90deg to face sideways, which is what I ended up doing. Facing forward, the head of the jack was really tight up against the propane bottles/cover, so turning it sideways fit much better with our camper. Looks to be well built, so hoping it lasts a long time, and I’m looking forward to not using a manual override crank next time we go camping!




by:

Great product, received it quickly, easy directions to follow. EASY to install!!


Comments
Still working great!!
Michael - 07/03/2022


by:

Overall the product does exactly what it's intended for and works well.
I however assumed that this would be a simple R&R for my camper and did very little installation research other that the video provided on etrailer' s website
Sadly it did not fit. Not at all. I didn't take into account that have a double framed hitch toyhauler. The baseplate on the factory leg was a TRIANGLE.....this unit was ROUND. Also the primary shaft was thicker than stock and would not drop down into place
I know modifying is frowned upon, but I found that ALL powered hitch legs I found have round mounting plates and it's not mentioned the leg tube is thicker than OEM?
Since NOT having a power lift wasn't an option for this camper application...too heavy in the front when ATVS loaded to lift for setting the equalizer hitch tension bars, I proceeded to modify by cutting the rear rounded mounting base ... square. Took off about 1/2 inch. Then I took my metal Dremel sanding bit and increased the hitch leg hole diameter slightly.
Took about 1 hr. Dropped it in. Wired it. Tested it. All good.
If you can't post this I understand, but take note that some of your website descriptions may need to be enhanced.
Thanks!


Comments
All good! Works as intended
Bradley - 07/15/2020


by:

I ordered the Reese Bulldog 4000lb power tongue jack on 6/2 and received it on 6/6, my second order from etrailer and it came just as fast as the hitch that I ordered from them previously. The jack was characteristically well packaged so everything was received in perfect condition. The installation took a half hour, including hitching the trailer up to my truck and unhitching after the swap out. I did read the instructions quickly before starting and I would recommend that anyone doing the installation do so as well, just to avoid any hick-ups. Overall it was a very easy installation. Because of limited space I did have to mount the jack sideways, so I appreciate that Reese gave me that option. The one item that I did not finish was a permanent power hook-up. The power wire provided was too short so I will be putting a connector inline so that I can route the wire to the battery terminal.


Comments
After a year of using the Bulldog tongue jack, I really appreciate how easy it makes hooking up the weight distribution bars on my hitch. Just push the Extend button and lift the connected trailer tongue until I can flex the weight distribution tension bars into place. These need to be standard equipment on travel trailers the crank jack that came with it was entirely inadequate/impractical for the work needed to lift the connected tongue to complete my hook-up.
Ross - 06/06/2019


by:

Installed Bull Dog 4000 lb Jack today. Pretty straight forward install. I gave it a 4 star, everything worked fine. I would suggest adding some flat washers along with the lock washers , it gives the lock washer a little better surface to rest on I believe instead of the bigger holes on the Jack. The insulation on the wire was scuffed through to the copper in one little spot, not really a big deal just put some good super 33 electrical tape on it , and they could put a connector on the wire to hook to the battery . Overall very nice ,would absolutely purchase again. etrailer always has quality choices .




by:

Seems like excellent product but was packaged upside down so the level on top of the jack was broke. I called right away and they were more than happy to send me a New level for the jack. Installation was super easy only took about 10 minutes for the jack and when the new level gets here that will be very easy also. Over all great service by everyone I talked to at etrailer.


Comments
It’s been great awesome power jack for my camper I actually traded campers and took this jack and put it on the new camper
Daniel - 07/01/2022


by:

It was very easy to install and it works great. The old tongue jack worked okay but this bully dog jack is smooth and powerful.


Comments
Still giving great service, the small bubble level however has evaporated for the second time. The jack is strong and dependable.
Herman - 07/13/2019


by:

We turned the mounting position 90 degrees to accommodate the truck tailgate. The jack has enough lift capacity to lift both the truck and tongue weight to any height...low gearing on lift works well without any electrical overload strain ...very pleased




by:

This has been a great trailer jack a year into installing it on my 12 x 6 enclosed cargo/camping trailer. The jack is out in the elements 24/7, gets used almost every weekend and is still going strong. I would definitely purchase this product again for my next trailer.




by:

Simple installation. Can't believe I went this long without a powered jack. Arrived sooner than expected. Great service.




by:

It’s a good, sturdy, and reliable Jack. I never have to worry if it’s going to work or not. Can’t say that about the cheap original equipment it replaced. It is slow but most are. I’m happy with this purchase.




by:

works well no issue. light still works as well. LEd light . easy to instal the level is a nice plus




by:

It arrived quickly, was easy to install, fit right where the old jack was. The cover fit correctly. It worked just like it was supposed to. It is installed on a 10k gvw cargo/camper hybrid and jacks it no problem.




by:

Can’t speak much yet if the durability of the Bulldog but I’ll tell you what I know. I’ll start with etrailer. They always provide exceptional service and product packaging and with everything I’ve ever ordered they always beat the expected delivery date. Packaging was great and not beat up. As for the jack itself, installation on our 32ft Jayco TT was seamless and I was finished within 30 mins. The fit and finish of the Bulldog is top notch. Enough power to lift the camper and rear of my 2500 to remove the weight distribution bars. The LEDs put off a decent amount of light, way better than the stick FIC unit. Time will tell but I also have five years in the warranty.




by:

I bought the Bulldog Powered trailer jack from etrailer because they not only have the best price, but amazing service, and shipping was rocket fast!! It took only three days to rural Colorado.

I watched etrailers video of the jack being installed that showed details and dimensions so i could be sure it would fit my application. The videos are well made and super helpful to ensure I got the right jack for my trailer.

Installation was a breeze, three bolts and one wire hookup and you're finished.
The jack works great and the lights are handy. I will say that it is not particularly fast, it is geared low and goes up and down slowly, but it works great and does exactly what it is supposed to do.




by:

Free shipping, excellent customer service, easy installation and fabrication!




by:

Nice product but poor QC. After assembly and installation the jack would not extend. After some searching online I opened the casing and found that the power wire on the switch was never plugged onto the blade on the back of the switch. I plugged it in and all is good. The plug/blade are the locking type, so it did not come loose during shipping, it was simply not connected at the factory, so I have to assume that nobody performed a function check before boxing it up and sending it out. Somebody with less troubleshooting experience would have probably wound up uninstalling and returning. Buyer beware.




by:

It was easy to install and performs as expected. Very satisfied with this purchase.




by:

Great jack, prompt delivery, great price. I couldn’t be more pleased. So much faster and easier than the jack that came with our trailer (and which jammed on us).




by:

Could have been 5 star but there is no specification of the recommended fuse size for the jack. The instructions say that the jack is internally protected but it is always recommended to protect the wiring from the battery to the unit. This is on the manufacturer, not etrailer.




by:

Works great!!! Plenty strong for my 32 foot toy hauler.




by:

Best purchase ever. Not sure why I didn't buy it sooner




by:

It’s a great Jack. A lot quieter than my old one.




by:

works good




by:

I bought this jack for my XLR 18HFS toy hauler. I needed to get the tongue up to reduce the ramp breakover angle to load my Road King. The trailer was equipped with a manual side crank unit, so the electric unit was a nice upgrade. The drop foot plus the stroke of the unit does what I needed. There is no end of stroke protection so the jack really jerks when it hits the ends. I simply marked the leg with a sharpie... I put arrows when I'm getting close and then a line when it's about an inch from full extend. I had to extend the hot wire a foot, but the motor is protected internally so no fuse is needed. My only other comment regards the built in level: I had to turn mine 90 degrees to clear the propane tanks but I wanted the level to remain fore-and-aft. I had to drill the holes myself to make this change. One last comment... my level blistered, or shattered, I'm assuming from heat. I had also purchased a cover (UF38-944020) that basically rests right on top of the level. I contacted etrailer and they sent me a new level. I have a foam insulator between the level and the cover now.



25
324
Show More Reviews

See what our Experts say about this Bulldog Camper Jacks

  • Warranty Coverage of Bulldog Powered-Drive Trailer Jack # BD500185
    The Bulldog Powered-Drive Trailer Jack you mentioned, part # BD500199 is covered by a 5 year Limited Warranty. If you click the provided link, you can see a video showing the jack being installed.
    view full answer...
  • Can The Bulldog Powered-Drive Trailer Jack # BD500199 be Installed in a 90 Degree Orientation
    There is no reason why you could not turn the jack at a 90 degree angle to gain more clearance. Due to the configuration of the holes in the mounting flange, you might need to drill new holes in your trailer tongue to mount the jack in that configuration. The motor housing cannot be repositioned on the shaft. Bulldog tells me that the edge of the motor housing is 1 inch away from the side of the jack tube, as shown in the photo I edited for you.
    view full answer...
    Image 1 for
  • Comparing of the Atwood and Bulldog Electric Trailer Jacks
    The Atwood Power Trailer Jack with Cover and Foot has a lift speed of 15 inches per minute. It also has a lift range of 14 inches. This jack has been around for a very long time and is very dependable. The wiring on this jack is slightly larger than the wiring on the Bulldog model. It is rated for 3,000 pounds. The Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14 inch Lift - 4,000 lbs, # BD500199, has a lift range of 14 inches, the only other added feature that this jack has...
    view full answer...
  • Will Bulldog Powered-Drive Trailer Jack, # BD500199 Work on a 4,700 Pound Travel Trailer
    The total lift capacity of the Bulldog Powered-Drive Trailer Jack, # BD500199, is 4,000 pounds. If mounted on the tongue of the A-Frame trailer, the tongue weight cannot exceed 4,000 pounds. If you do not know the tongue weight of your travel trailer, it is typically 10 to 15 percent of the gross trailer weight. For a trailer weighing 4,700 pounds, the tongue weight would be 470 to 705 pounds. The jack mounts on a standard A-frame trailer, most of which use the same bolt pattern for mounting...
    view full answer...
  • Troubleshooting Malfunctioning Bulldog Power Jack # BD500199
    I spoke with my contact at Bulldog, and he provided several possible causes for the problem you are experiencing. The jack grounds via its attachment point to the trailer. In case there is excessive paint between the jack and the trailer frame, running a separate ground from the jack mounting flange to the trailer could possibly solve this problem. Make sure that the jack mounting flange is making direct metal to metal contact, and that there is no corrosion between the two that would...
    view full answer...
  • Is There a Power A-Frame Jack That Can Rotate 90 Degrees
    There is a Bulldog jack that has numerous bolt holes to allow you to unbolt the jack and rotate it 90 degrees, the Bulldog Powered Drive Trailer Jack # BD500199. You can see an example of this in the linked video - just forward to about the 6:15 mark. This jack provides 22" of lift (9-3/4" retracted height and 31-3/4" extended height), has a 4,000 lb capacity as well as an outer tube diameter of 2-1/4".
    view full answer...
    Image 1 for
  • Recommended Electric A-Frame Jack for 2010 Keystone Laredo
    IThe Bulldog Powered Drive Trailer Jack # BD500199 is rated for 4,000 lbs with 22" of lift. It does have a great 5-year warranty, compared to the 1-year or 2-year warranties of other electric jacks in its class. The Bulldogn # BD500199 has been well reviewed and Bulldog has an outstanding reputation for the quality of their jacks. Due to that and the long warranty if it were me I'd go with the Bulldog # BD500199.
    view full answer...
  • Bulldog Powered Drive Stalling Powered By On Board 12V Battery
    It sounds like either the battery that the Bulldog Powered Drive Trailer Jack part # BD500199 is powered by is not getting a complete charge or I know you said you have double checked the ground but since the ground is through the mounting hardware you may want to run a jumper wire from the mounting hardware to the frame of the trailer to see if that gives it a sufficient enough ground. Other customers have had success grounding the jack this way. It could also be that the tube is slightly...
    view full answer...
  • Troubleshooting Power Isues With the Bulldog Velocity Jack
    According to the details you told me, it sounds like you are running the Powered Drive Trailer Jack # BD500199 off of a battery on the trailer. Does the problem you describe always occur when the jack as at a particular height? If so, the jack tube might be slightly bent. The bend would cause the jack to bind once it reached a certain height. Manually operating the jack would extend or retract the jack past the point where the tube is bent, at which time the motor would be able to move...
    view full answer...
  • Quiet Electric Trailer Jack with Remote Operation for Use in Levitation Illusion
    I think the Ultra-Fab Phoenix # UF38-944055 is going to be your best option. It uses a ball bearing type of system rather than a screw and nut design like most jacks. These means less friction and thus less noise. It also comes with a wireless remote key fob that would probably work better than a foot pedal would and is easier to conceal. It will also give you a little more flexibility as to how the illusion is done since there would not have to be a cable and switch attached to the jack....
    view full answer...
  • Recommended Powered Trailer Jack For 2003 Adam 3-Horse Trailer With Living Quarters
    I recommend a powered drive trailer jack like part # BD500199 that would work great for your horse trailer if the tongue weight of the trailer is less than 4,000-lbs when it is fully-loaded and ready-to-go. This jack is designed to mount on a standard A-frame trailer. I have attached a link to a product review video you can check out and also a link to a helpful article that explains how to determine tongue weight you can take a look at.
    view full answer...
  • Troubleshooting Bulldog Powered A-Frame Jack that Does Not Want to Function
    The Bulldog Jack # BD500199 that you referenced grounds through the mounting hardware so your best option would be to run a jumper wire from the mounting flange of the jack to the ground wire on your trailer wiring to see if that gets it to work. It has an internal circuit breaker that automatically resets so only other possible problem is an internal problem. For that you'd want to return it to where you bought it from.
    view full answer...
  • Troubleshooting Bulldog Electric Jack Operating in Reverse
    If your Bulldog Powered Trailer Jack like part # BD500199 is operating in reverse (up is down and down is up) then most likely it is indeed just a matter of switching the wire leads coming from the switch. This should resolve the issue. If this does not fix the problem then you will want to inspect the wiring itself for any frayed areas that might be shorting out and replace them as needed. Please
    view full answer...
  • Recommended Electric Jack with Footplate
    Yes. The Atwood Footplate is confirmed to fit your jack. However, they've both been discotinued, but I have linked the page to our electric jacks with that 4000 lb weight capacity so you can see other options we do have available. For a great quality jack with a drop leg footplate, I recommend the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199. This is an easy to use electric jack with all the components you are seeking.
    view full answer...
  • Dimensions of Bulldog Electric Jack # BD500199 from Mount to Motor Housing
    I went out to our warehouse to assist with the dimensions of the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199. From the top of the mounting plate to the bottom of the motor housing is 12-7/8 inches. From the top of the mount to the lowest part of that housing that includes the light, the measurement is 11-5/8 inches.
    view full answer...
    Image 1 for
  • Recommendation For How To Power An A-Frame Bulldog Powered Trailer Jack Power
    Technically, your A-Frame Bulldog Powered Jack, Item # BD500199, can be powered by the 12 volt circuit on a 7-Way trailer side connector which is in the 1 o'clock position where the wires connect if looking at the back of the 7-Way connector. However, the vehicle side may not have enough rated power for the jack which needs 30 amps. If there are other draws on the power then you could easily overload the wiring and even "burn-up" the 7-Way connector on 2002 Ford F-350. To have peace...
    view full answer...
  • Will Bulldog Powered Drive Trailer Jack BD500199 Replace Manual Jack w/Triangle Mounting Bracket
    Yes, you can use the Bulldog Powered Drive Trailer Jack # BD500199 in place of your existing jack because the mounting hole pattern in the bracket will be the same between the 2 jacks. Provided that your existing jack also has a round outer tube that is 2-1/4 inches in diameter you will be good to go.
    view full answer...
  • Recommended Electric A-Frame Trailer Jack for a Forest River Rockwood Roo 23SS
    You are correct in that the Fastec Electric Trailer Jack part FIC 3500 that you have now is rated for 3,500 lbs. It also offers up to an 18" lift. You can certainly use a 4,000 lb jack in place of this and for that, I recommend using the Bulldog Powered Drive Trailer Jack part # BD500199 on your Forest River Rockwood Roo 23SS. This jack offers up to 22" of lift and has an additional 500 lbs of capacity. The added capacity will extend the life of your jack because it does not have to work...
    view full answer...
  • Troubleshooting Bulldog Electric Trailer Jack with Dead Battery
    The Bulldog 4,000 pound Powered Drive Trailer Jack # BD500199 runs off the of a battery on the trailer or directly from the tow vehicle's battery depending on how you have it setup. If it's off the trailer's battery then you charge it by plugging your trailer into your tow vehicle and it charges from the vehicle's battery.
    view full answer...
  • How Much Power Does the Bulldog Jack Require to Operate
    The Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199 is run off of a 12V system and has a max draw of 20 amps to extend or retract under load.
    view full answer...
  • Do Bulldog Powered Jacks have Inline Fuses
    The Bulldog Powered Drive Trailer Jack part # BD500199 comes with an internal circuit breaker so there should not be a in-line fuse holder on the black wire from the jack unless someone added it during installation or before you purchased the jack used. The Bulldog jacks all have internal circuit breakers and they do not recommend adding an inline fuse holder because it would require a high amperage fuse that is not needed or safe. If the black wire coming from the jack is bad you will...
    view full answer...
  • Does the Bulldog Powered Drive Trailer Jack Use a Ball Screw
    The Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black # BD500199 uses an ACME screw, not a ball screw. An ACME screw uses a trapezoidal shape thread to roll onto the lead screw and does not use ball bearings.
    view full answer...
  • Hole Spacing and Retracted Height of Bulldog BD500199 Powered A-Frame Trailer Jack
    The Bulldog # BD500199 powered A-frame jack uses the industry standard 3 inch on center bolt spacing, but the bolts holes are slotted, you there's some leeway. When fully retracted, the underside of the foot plate and the underside of the jack's mounting flange is 9-3/4 inches. To get a real world feel of where the foot plate would sit in relation to the trailer tongue on your trailer, measure down 9-3/4 inches downward from the top of the A-frame which is where the bottom of the foot plate...
    view full answer...
    Image 1 for
  • How Would Bulldog Powered Drive Trailer Jack # BD500199 Power from Battery Box
    There should be a grommet on the battery box that has a wire ran to it currently that you could fit the power wire of the Bulldog jack part # BD500199 into to run it from. This grounds through the mounting hardware so you do not have to wire that in any way.
    view full answer...


< Previous
123. . .4



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video by:
Andrew L
Employee Dustin K
Video by:
Dustin K
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Hayden R
Installed by:
Hayden R
Employee Shelly K
Written by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830