bing tracking image
  1. Camper Jacks
  2. Bulldog
  3. Landing Gear
  4. Gooseneck Landing Gear
  5. 9001 - 10000 lbs
  6. Sidewind Jack
Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs

Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs

lowest price pledge
Retail:$327.59
Our Price: $195.41
You Save: $132.18
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 63 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Heavy-duty, square drop-leg jack includes crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-2/5" retracted height. Call 800-298-1624 to order Bulldog camper jacks part number BD182804 or order online at etrailer.com. Free expert support on all Bulldog products. Guaranteed Lowest Price and Fastest Shipping for Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (198)
  • Q & A (0)
  • Photos
  • Used (1)
  • Why etrailer?

Bulldog Camper Jacks

  • Landing Gear
  • Gooseneck Landing Gear
  • 9001 - 10000 lbs
  • Sidewind Jack
  • 26 Inch Lift
  • Weld-On
  • Bulldog
  • 1 Jack

Heavy-duty, square drop-leg jack includes crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-2/5" retracted height.


Features:

  • Sturdy steel, drop-leg jack is perfect for raising, leveling, and supporting horse, livestock and other weighty trailers
  • Drop leg with spring return increases overall extension for maximum adjustability
    • Plunger pin positioned to the side
  • Gearbox is easy to access for routine maintenance
    • Includes grease fittings
  • Large footplate provides excellent stability
  • 7-Gauge alloy steel offers superior strength and durability
  • Black-painted inner and outer tubes are weather resistant
  • Direct-weld design
  • Sidewind crank included
  • Two of these jacks can be used for tandem applications by repositioning pinion bevel gear in one jack
    • Telescoping shaft extension tube required for tandem use (BDCS730300 - sold separately)


Specs:

  • Bracket height:
    • 27-3/8" Retracted
    • 39-7/8" Extended
  • Total lift: 26"
    • Travel: 12-1/2"
    • Drop leg: 13-1/2"
  • Outer tubing width: 4"
  • Handle radius: 13-1/2"
  • Lift capacity: 10,000 lbs
  • Static capacity: 12,000 lbs
  • Limited 5-year warranty


This jack can be used in tandem operations with Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift (BD182805). When used in tandem, a user-made connecting rod is required. Both jacks are designed so that their plunger pins and footplate handles are in easily accessible positions from either side of your trailer.

182804 Bulldog Heavy Duty Square Direct Weld Jack with Spring Return Drop Leg, Sidewind, 26" Lift - 10,000 lbs - SWQ 180 DL-BC SR

Item # BD182804




California residents: click here



Customer Reviews

Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs - BD182804

Average Customer Rating:  4.8 out of 5 stars   (198 Customer Reviews)

Heavy-duty, square drop-leg jack includes crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-2/5" retracted height.

- BD182804
by:

Item exactly as described and very prompt service and shipping. Great communication from all the fine folks at etrailer.com



- BD182804
by:

This was a replacement jack for a flat bed trailer. Installed it and it was just like the old one. Very happy with the jack, I recommend it highly.


Comments
Our Bulldog jack is still working like the day we bought it. Thanks for the follow up!
Brian - 01/30/2018



- BD182804
by:

We trust in E Trailer and the service provided. Looking forward to doing more business.



- BD182804
by:

Heavy duty, well-built jack. I decided to upgrade my trailer jack for poor performance and after searching the net I came across a video from etrailer describing the features of the Bulldog Square Jack # BD182804. It has every feature you need and some. With the upgrade, I must mention there was welding involved. I first confirmed there was structural support where the jack was to be mounted. I disassembled the jack per the video, located and welded the housing in place, reassembled the jack and lubed with the same grease I use for my trailer axles. It was that easy.



- BD182804
by:

Worked out great for our replacement



- BD182804
by:

Delivered as promised, customer service was excellent



- BD182804
by:

Easy snd fast good service



- BD182804
by:

Heavy duty weld-on jack great for application of large sawmill trailer at reasonable price. Unit well packaged and arrived without any issues.



- BD182804
by:

The Jack on my trailer quite working after 20+ years. i bought this Jack to replace it. I got fast delivery and it was packed well so there was no damage. Had my welder cut the old one off and weld this one on and it works perfectly.



- BD182804
by:

I called bulldog about a BD182404 trailer jack that I have on my trailer that has a frozen drop down non- return spring leg and asked them if I could put a spring return drop down leg and all of the internals from a new jack into the old 4"x4" tube. The tech said I would need a BD 182804 jack and it would all fit, (he was right). The reason for not using the new tube was there was nothing wrong with the old one and by not cutting out the old one and welding in the new one saved hours, thanks to Bulldog for that info. I also want to thank etrailer.com for their timely shipping and follow through, I appreciate receiving the right part the first time on time, Thanks again.



- BD182804
by:

Works great!



- BD182804
by:

Very good stout well built jack for the price


Comments
Everything is great , I’m only kind of regretting not going with either dual manual or single electric . I did what the budget allowed me to do at the time you know .
Dusty - 03/20/2019



- BD182804
by:

As far as I know, this product has worked out well. I have not had any complaints from our employees. It shipped in a very timely manner. I had follow-up emails and a phone call from etrailer letting me know the status of my order throughout the shipping process. I would definitely purchase from this company again.



- BD182804
by:

Nice heavy built jack. Installed it on our 10 ton equipment trailer and it works perfect. A good jack for reasonable price! AND etrailer.com was a pleasure to do business with.



- BD182804
by:

Nice quality product and shipping time was great. Would highly recommend purchasing from etrailer.



- BD182804
by:

Great speedy service!!!



- BD182804
by:

Etrailer was quick, affordable and fast. Great product, had to replace jack on livestock trailer that rusted out.



- BD182804
by:

This is very heavy duty, you can jack up your trailer with the equipment on.



- BD182804
by:

I like the products and service and so far shipping has been just as good thanks



- BD182804
by:

It on one of our equipment trailers and is great has worked flawlessly since installed a year ago



- BD182804
by:

Great service. I can always depend on eTrailer. Thank you!



- BD182804
by:

Extremely fast delivery and excellent service. Very happy with product



- BD182804
by:

The best service. Good inventory, easy site to search and the fastest shipping ever. Great place to buy from.



- BD182804
by:

GREAT PRODUCT, FAST DELIVERY, THANKS



- BD182804
by:

product was exactly as advertised and price and service were excellent


Comments
jack still good as new.
willie - 04/04/2018


25
200
Show More Reviews

Ask the Experts about this Bulldog Camper Jacks



  • Do Replacement Rod, Screw and Nuts for Square Jacks Only Fit Certain Jacks
    The Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT, along with the Replacement Screw and Nut Kit for 12000-lb Capacity Bulldog Jacks # BD500217 and Replacement Screw and Nut Assembly for Bulldog Square Jacks - 10K TW # BD500250 only fit specific jacks and are not universal parts. So unfortunately you will need to know the exact brand and model of jack you have in order to try a replacement part that fits. If that is not something you can find,...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Cap for 4 inch Square Trailer Jack
    What you'd need is the part # BD017802 for your 4 inch square trailer jacks that are missing the top caps.
    view full answer...
  • Differences Among Square Drop Leg Jacks # BD182800, # BD182804, and # BD182815
    The difference between Bulldog Square Jack - Drop Leg with Spring Return - Sidewind, # BD182800 and # BD182804 is that the latter comes with a handle. Both of these jacks can be used in tandem with BD182805. They all have the same: Bracket height: 27-2/5 inches Retracted, 39-9/10 inches Extended Drop-leg travel: 13-1/2 inches Lift: 12-1/2 inches Tubing width: 4 inches Plunger pin is positioned to the side Bulldog Square Jack - Drop Leg with Spring Return - Sidewind, # BD182815 can not...
    view full answer...
  • Dual Jack Landing Gear for Gooseneck Trailer Transporting Large Water Tank
    The weight of 1600 gallons of water, without the water tank's own weight factored in, is about 13,350-lbs. For such a high-weight application I suggest Bulldog Square Jacks # BD182804 and # BD182805 along with Connecting Rod # BDCS730300. Two jacks are definitely the way to go. If you wish to motorize this jack setup you can also add motor kit # BD1824200100. I also recommend you first determine the actual pin weight of the loaded trailer so that you can be sure to select jacks with high...
    view full answer...
  • How to Remove Pin in Handle Shaft to Replace Gears on an Older Bulldog Model 12 Square Jack
    I spoke to my contact at Bulldog who said that the Model 12, 180 Series Bulldog jack that you have is the older version of the the current 10K jacks like part # BD182500. Since you have the older version without the spring that you mentioned seeing in other videos it means that pin you are trying to remove has knurls on it. When it was first installed that pin hole was smooth and the knurls on the pin basically "carved" into that pin hole. To remove it you need to use a punch and quite...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Jack To Clear Tailgate With A-Frame Trailer
    I do have an option for you but the tongue jack only needs to be rated for the tongue weight of your trailer which will only be around 10-15% of its loaded weight. Therefore, you are likely only going to need around a 700-1,000 lb weight capacity. The higher rated you go, the better off you will be but an 8,000 lb option would be far too much. In order to clear your tailgate while the trailer is attached you are likely going to need a side mount, swivel option. I recommend the Bulldog Round...
    view full answer...
  • Replacement Jack Handle With Vertical Clevis for Gooseneck Trailer Jack
    The Bulldog Replacement Sidewind Jack Crank Assembly # BD015181 that you referenced does have the vertical clevis you indicate was on your original. This handle is intended for Bulldog's heavy-duty square jacks, like # BD182804. If you can provide the brand and part number from your jack tube I'll be glad to confirm the correct replacement handle for you.
    view full answer...
  • Availability of Cross Shaft for Use with Bulldog Jack BD182804
    We have the fixed cross shaft extension tube part # BDCS730300 which could be used to extend out the crank of the Bulldog Jack part # BD182804 that you referenced. This shaft is 72-3/4 inches long though which might be too long depending on the width of your trailer.
    view full answer...
  • Powered Landing Gear Recommendation for a Loaded PJ Work Trailer
    There isn't a motor that can be added to the Pro Series Jacks part # PS1400960376. But if you are in the market for that style system, I recommend using # BD182804, and then add motor assembly # BD1824200100. You can also add # BDCS730300 and # BD182805.
    view full answer...
  • Repair Parts and Replacement Jack for 2000 Sundowner 2-Horse Gooseneck Trailer
    We do offer repair kits for many jack types, brands and models but we do not have a way to look up the specific brand and model of jack on your 2000 Sundowner gooseneck. From my research it appears most of the 2-horse gooseneck trailers from Sundowner used a single square jack, like the Bulldog 10K square jack # BD182804. This is a weld-on jack. We also have a Bulldog bolt-on 12V electric jack, part # BD185400 rated for 12K. If you can find brand and specific jack model information on...
    view full answer...
  • Powered Bulldog Jack Recommendation for a 24 ft Flatbed Gooseneck Trailer with Camper
    The best recommendation I can give you would be to replace your current jack with a Bulldog Jack like our part # BD182804 and then get a Bulldog Powered-Drive Kit # BD1824200100. The powered drive kit is only confirmed to fit Bulldog jacks so you would not be able to install the kit on your current jack.
    view full answer...
    Image 1 for
  • Similar Jack to Bulldog 10k # BD182304 That Has Spring Return Leg
    The closest jack option we have to the jack you mentioned that has a spring return leg is the Bulldog Square Jack # BD182804 which has the same 10k capacity but instead uses a sidewind handle.
    view full answer...
  • Replacement 10K Capacity Jack for Pace Trailer
    I wasn't able to find any information about the jack part number you provided. We do offer some 10K capacity Bulldog jacks, but they aren't A-frame models. We offer a direct weld-on drop leg model, part # BD182804 or a fixed pipe mount, part # BD182524 that would work well for you. The pipe mount is sold separately as part # BD005122.
    view full answer...
  • Recommended Landing Gear For Stabilizing A 2004 International 4300
    The best option we will have is the Bulldog Square Jack - Drop Leg w/ Spring Return # BD182804. This has a 10,000 pound lifting capacity and a 12,000 pound static capacity. As this is the capacity per jack, you can add the Bulldog # BD182805 to the other side of the frame to double the capacities. You will need to fabricate a bar to connect them, but I think this will be the best option we have for your 2004 International 4300. Now the most heavy duty option we have will be the Bulldog...
    view full answer...
  • Difference Between Bulldog Landing Gear Jacks BD182800 BD182805 BD182804
    The most similar two jacks you mentioned are the part # BD182800 and # BD182805 with the difference being the side of the leg the jack foot release lever is on which is determined by which direction the jack goes when cranked. These are both basically follower jacks to the # BD182804 you also mentioned which has the main crank handle. The follower # BD182805 would be ideal on the right hand side of the trailer and # BD182800 for the left.
    view full answer...
  • Will Ultra-Fab Motor Kit Work On Bulldog Square Drop Leg Jack
    It sounds like you have a Bulldog Square Jack, part # BD182804, and want to add a motor. The correct powered drive kit for the # BD182804 is part # BD1824200100. This is designed to fit Bulldog, single-speed jacks with 4 inch square tubing and with a 1 inch shaft. The Ultra-Fab Motor and Switch Kit, part # UF17-943045 is not designed to work with the Bulldog jack. The Ultra-Fab Motor is designed to fit landing gear sets with connecting rod and up to a 6,000-lb capacity.
    view full answer...
  • Recommended Landing Gear for Peterbilt 335 Expedite Straight Truck
    For your Peterbilt 335 Expedite straight truck, I recommend the Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 12-1/2" Lift - 10,000 lbs # BD182804. This jack is 27-3/8 inches retracted and 39-7/8 inches extended. It has a drop-leg travel of 13-1/2 inches.
    view full answer...
  • Does 10k AutoLock Drop Leg Trailer Jack Have a Spring Return for the Pin on the Drop Leg
    I was able to find that the pin for the drop leg on jack # TC10B is not spring loaded. Pro Series jack # PS1400950376 does have a spring return pin. I have included a link to a video review of this jack for you. Bulldog jack # BD182804 also has a spring return.
    view full answer...
  • Bulldog 12k Jack Recommendation where the Pull Pin is on the Same Side as the Crank Handle
    What you would need is a Bulldog Square Jack # BD182804. This jack has the handle on the same side as the pull pin for the jack extension and should be exactly what you need. I attached a review video for this product for you to check out also.
    view full answer...

Do you have a question about this Camper Jack?


Used Items Available
Used Picture for Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
Used Picture for Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
Used Picture for Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs

Condition: Surface Scratches

Notes: Item has several surface scratches but will function as intended.

Our Price: $167.55
Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624