Bulldog Square Jack - Fixed Leg - Sidewind - 12-3/4" Lift - 10,000 lbs

Ask the Experts about this Bulldog Trailer Jack

Do you have a question about this Trailer Jack?

• Replacement Parts For 12,000 lb Jack
  
• We don't have any Trailer Tough brand jacks, however, the Replacement Screw and Nut Kit for 12000-lb Capacity Bulldog Jacks, # BD500217 may work. If you trade out the gears # BD500212 and bearing # BD001015, you will basically have a new jack on the inside. You could also just replace the entire jack with the Bulldog Side Wind Jack Assembly - 12,000 lbs # BD182513, however this jack does not have a drop leg. If you want the hand crank you will need # BD015181.
  view full answer...


• Availability of Trailer Jack with Over 20k Capacity and Can Be Set at 31 inches of Height
  
• The Bulldog Square Jack part # BD1823050383 has a 22.5k capacity and has an extended height of up to 48-11/16 inches. The # PS1400830383 has a retracted height of 17-3/16 inches and has a static capacity of 8,000 lbs so it should work well for your other application.
  view full answer...


• Replacement Trailer Jack For Rice Trailer That Currently Has Ram 14K Jacks
  
• The Ram 14K jacks don't have a replacement rod and nut available like the 12K # TJD-12000-RODNUT and are no longer available in that capacity. I recommend changing out your jacks for the 12K option. You can use the Bulldog Side Wind Jack Assembly - 12,000 lbs # BD182513 or the Buyers Products # 3370091410H or # 3370091415H as a replacement. These are all excellent products for the price to help your trailer function as intended.
  view full answer...


• Landing Gear Jacks for a Keystone Cougar 5th Wheel Trailer
  
• Bulldog square weld-on jack # BD182513 could potentially be used on a 5th wheel trailer but it really is meant for trailers with exposed frames and doesn't have stops on the outer tube for brackets like landing gear jacks have. If you have brackets already then you would just need to weld on some stops to the outer tube and the heights needed. For a tandem, manual landing gear set you could use # RVLG-8HDL which is both legs with the stops already on them, brackets, handle, and connecting...
  view full answer...


• Replacement Side Cranking 12K Bulldog Square Trailer Jack Leg
  
• A drop leg on a jack will just be held to the inner leg with a pin such as # BD70129201. It sounds like the inner leg on your jack is damaged. That part is not available but you can replace the hole leg. We have 1 Bulldog square, side crank jack rated for 12,000 pounds and it is # BD182513.
  view full answer...


• Side Mounted, Square Sidewinding Trailer Jack with 18 Inches of Travel
  
• For square, sidewinding jacks with a drop leg I can get you close to 18 inches of lift. You could potentially use Bulldog jack # BD1823050383 with 17 inches of lift. If you want to go above that though you would need a jack with a drop leg such as # BD182701 which has a total of 26 inches of lift. I have linked videos of both of these jacks for you.
  view full answer...


• Available Types and Weight Capacities of Trailer Jacks
  
• We carry all types of trailer jacks, from powered A-frame tongue jacks like # HT87247 to weld-on side-mount jacks like # PS1400950376 to 5th wheel trailer landing gear like # BD500161. On the linked page you can see all jacks; click on the type you need and then click on the weight capacity required. For instance, in a 12K rating we have side-mount jack # BD182513 and powered jack # BD185400. We also have jacks like the weld-on # BD1823050383 and the bolt-on # BD1839060383, both...
  view full answer...


• Type of Grease Used for the Bulldog Side Wind Jack Assembly # BD182513
  
• There isn't necessarily any specific grease to use in the Bulldog Side Wind Jack Assembly # BD182513. You can use the LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11465 along with the LubriMatic Professional Pistol Grease Gun # L30416. You can find a typical grease and grease gun at your local hardware store as well.
  view full answer...


• Weight Capacities for the Bulldog Jack part # BD182513
  
• The two capacities for the Bulldog Jack part # BD182513 are static load (held in place) of 12k and lifting capacity of 10,000 lbs. For most trailer applications the lifting capacity is the most relevant.
  view full answer...

Do you have a question about this Trailer Jack?