Customers prefer these similar products
Weld on the assembled L-bend swivel bracket and easily swing this jack up for travel and down for use. Jack has 14-1/2" retracted height and measures 10" from mounting bracket to top, excluding handle. Includes plunger pin and footplate.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Bulldog Round Top-wind Snap Ring Swivel Jack. It has a 15" lift, 2,000-lb weight capacity. This is a dependable jack which is recognized as an industry standard for agricultural and commercial applications. It is ASABE complaint, they do use, on the inside, precision fitted parts to provide exceptional stability and reliability. The handle right here, when you flip it into the working position is a top-wind handle. It has a nice, smooth, ergonomic design for easy cranking.
The outer tube on this is 2-1/4" diameter outer tube, has a nice gray painted finish to it, the inner tube, which slides on the inside is a 2", has a nice zinc plated finish. If you notice, it does have a foot plate that's attached to it and is also zinc plated. The mounting brackets on this, right here, this is a weld on L-bend mounting bracket. It comes assembled to the jack using a snap ring. It does have a nice convenient spring loaded 1/2" diameter plunger pin swivel feature right here that when you pull it out, this mounting bracket will be attached to your trailer and allow your jack to swivel up and stow in the parallel position to the tongue for travel, and then when you're ready to use it, pull the pin back out, rotate it down, it'll lock into place in the upright position for use. A few specs on this jack, the bracket height, which will give you retracted and extended height dimensions, is going to be measured from the center of the bracket down to the ground. Right now it's in the fully retracted position, it'll be 14-1/2".
Since it has a 15" lift, if we crank this all the way extended out, would be 29-1/2". The clearance from the center of the bracket to the top of the jack is 10". The handle radius is 6-5/8", and again, this jack has a lift capacity of 2,000-lbs and a static load capacity of 3,000-lbs. You turn it clockwise it rotates open, and then if you turn it counter-clockwise it'll retract. Then for storage, just flip the top-wind handle down just like that so it's close to the jack. That should do it for the review on the Bulldog Round Top-wind Snap Ring Swivel Jack with a 15" lift and a 2,000-lb weight capacity..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.