1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 4-3/4 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. Standard
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4

Item # AKIHUB547535ZK
lowest price pledge
Our Price: $43.26
Trailer Hubs and Drums
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.92 lbs
Quantity: 
etrailer Hub - AKIHUB547535ZK
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Protective finish resists corrosion. Lowest Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 part number AKIHUB547535ZK can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB547535ZK

  • 5 on 4-3/4 Inch
  • For 3500 lbs Axles
  • Hub
  • Standard
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • L44649
  • 1/2 Inch Stud
  • L68149
  • etrailer

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Protective finish resists corrosion.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Sturdy iron construction
  • Protective finish resists corrosion
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 14" to 15"
  • Bolt pattern: 5 on 4-3/4"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


H-5475-37 Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4





Video of Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of etrailer Trailer Hubs and Drums - Idler Hub Assembly - AKIHUB547535ZK

Ellen: Hey everybody. I'm Ellen here at etrailer.com, and we're going to be taking a quick look at the trailer idler hub assembly. This works for your 3,500 pound axles that have a 5" on 4.75" bolt pattern. So this gives you everything you need to replace that idler hub assembly and get a new one on there. It's a good idea to get one for either side so that they we're the same and you don't have to worry about one wearing unevenly from the other. So it's a good idea to get two per axle that you're going to be putting this on.

So let's take a closer look at it and make sure it's the right fit for your application. Again, it is meant for a 3,500 pound axle, or a 3,500 pound axle, with the number 84 spindle. It's compatible with any kind of standard axle from most manufacturers including AxleTech, Dexter Lippert or LCI, and ALKO.Has the idler learned itself. The races are already installed, so that's one thing you don't have to worry about installing yourself. Same on the outside there.

We'll have the bearings to fit in place. So the smaller bearing goes on the outside, slightly larger bearing goes on the inside. Those will help that axle to move freely and easily and keep the friction to a minimum there. You want to be sure to properly grease these before you put them in place, so you want to pack those full of grease. We do have some options as far as different greases here at etrailer.com, so if you don't have any or you need a restock, we should have you covered when it comes to that.

We'll also have our grease seal for the inside and the grease cap for the outside. Whenever you're putting this in place, you'll want to use maybe a block of wood or something flat and a mallet to tap that in all the way around so that it gets a nice solid seat into that idler hub.That's going to help to keep that grease from getting out and slinging out over your wheels. Comes with new lug nuts as well to go on our stubs there. Again, this works with a bolt pattern of 5" on 4.75". So that's if you measure from the center of one bolt directly to the center of the other side between the next two bolts there.

Will fit with wheel sizes between 14" to 15". The wheel stud dimensions is a 0.5" diameter and 1.3125" Long. Grease cap flange diameter is 1.988". Capacity for just a single idler hub is 1,750 pounds, so if you get both of these it works for that 3,500 pound axle.It is covered by a one-year limited warranty. It is QAI and CSA-certified. And that's pretty much all there is to it for our look at the trailer idler hub assembly for your 3,500 pound axle. I hope this video has been helpful in deciding if this is going to be the right kit for you. We do have a lot of options available here at etrailer.com, including axles, grease, and all kinds of other stuff. So if you need anything else for your trailer, check us out. Thanks for watching.


Customer Reviews

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - AKIHUB547535ZK

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Protective finish resists corrosion.

- AKIHUB547535ZK
by:

fit well and had everything I needed to put on. holding up so far.



- AKIHUB547535ZK
by:

Quality product for price. Product was shipped fast.


2
2

Ask the Experts about this etrailer Trailer Hubs and Drums

  • 2 inch Lift Timbren Axle Less Kit for Tear Trailer to Use 13 inch Wheel/Tires
    For a 2 inch lift Timbren setup for your trailer the Timbren kit part # TASR35HDS07 would be best option as it has the amount of lift you are looking for as well as has a reasonable weight capacity at 3,500 lbs for your trailer. Then for a hub you'd want to use the part # AKIHUB547535ZK which has a 5 on 4-1/2 inch bolt pattern which would allow for a 13 inch wheel and tire like the # AM31994 to fit well.
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M
Employee David F
Installed by:
David F
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.