View Cart
Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Pre-Greased

Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Pre-Greased

Item # AKIHUB-545-35-PG-EZK

lowest price pledge

Our Price: $50.62

Trailer Hubs and Drums

Orders above $99 qualify for Free Shipping

Shipping Weight: 11 lbs

Quantity: 
AKIHUB-545-35-PG-EZK - 1/2 Inch Stud etrailer Hub
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub
  • EZ Lube
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • L68149
  • etrailer
  • L44649
  • 1/2 Inch Stud
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Pre-greased for easy installation. Lowest Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Pre-Greased part number AKIHUB-545-35-PG-EZK can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (19)
  • Q & A (10)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-PG-EZK

Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Pre-greased for easy installation.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb E-Z Lube trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 13" to 17-1/2"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube-Compatible Assembly for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


H-545-09-1 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Pre-Packed and Assembled - EZ Lube





This Product Fits The Following Vehicles

2013 - 2014 Skyline Aljo Retro Travel Trailer 130B

2013 - 2014 Skyline Layton Retro Travel Trailer 130B

2013 - 2014 Skyline Nomad Retro Travel Trailer 130B

2014 - 2014 Skyline Skycat Travel Trailer 130B

2013 - 2014 Skyline Weekender Travel Trailer 130B

2016 - 2016 Keystone Springdale Summerland Travel Trailer 1400FD

2015 - 2015 Coachmen Apex Travel Trailer 151RBX

2018 - 2018 Forest River Cherokee Wolf Pup Travel Trailer 15SW

2016 - 2016 Keystone Springdale Summerland Travel Trailer 1600BH

2016 - 2016 Keystone Hideout Travel Trailer 165LHS

2016 - 2019 Forest River Cherokee Wolf Pup Travel Trailer 16BHS

2015 - 2018 Forest River Cherokee Wolf Pup Travel Trailer 16FQ

2018 - 2019 Keystone Passport ROV Travel Trailer 170RKRV

2019 - 2019 Keystone Bullet Colt Travel Trailer 171RKCT

2015 - 2015 Dutchmen Kodiak Express Travel Trailer 172E

2017 - 2017 Dutchmen Kodiak Travel Trailer 172E

2019 - 2019 Keystone Bullet Colt Travel Trailer 172RBCT

2016 - 2017 Dutchmen Aerolite Travel Trailer 174E

2016 - 2016 Keystone Hideout Travel Trailer 175LHS

2016 - 2016 Keystone Hideout Travel Trailer 178LHS

2019 - 2019 Forest River Cherokee Grey Wolf Travel Trailer 17BH

2015 - 2015 Forest River Grey Wolf Travel Trailer 17BH

2017 - 2017 Forest River Grey Wolf Travel Trailer 17BHSE

2016 - 2016 Keystone Springdale Summerland Travel Trailer 1800BH

2012 - 2012 Skyline Bobcat Travel Trailer 186

2012 - 2012 Skyline Nomad Travel Trailer 186

2012 - 2012 Keystone Springdale Summerland Travel Trailer 1900RB

2018 - 2018 Forest River Salem Cruise Lite Travel Trailer 190RBXL

2018 - 2018 Forest River Wildwood X-Lite Travel Trailer 190RBXL

2011 - 2011 Keystone Bullet Premier Ultra Lite Travel Trailer 19FBPR

See All Vehicle Fits



Video of Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Pre-Greased


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-PG-EZK Review

Today we're going to take a look at the pre-greased trailer idler hub assembly for 3500 pound EZ Lube axles. It has the five on four and a half inch bolt pattern. Now this is a pre-greased idler hub assembly, which is designed to fit EZ Lube idler axles. If you notice it has the rubber plug on the front and on the back. The reason that is is because they've already pre-greased the bearings, installed them in the bearing races, and actually installed the grease seal in the back. It's pretty much all ready to go. It's very easy to install.

When you do receive this there is no need to pack the bearings. This is designed to fit easy-lube axles. Those are the axles that will have a grease zerk fitting on the end of the spindle that allows you grease the bearings without having to remove your complete hub assembly. Comes with this EZ Lube compatible grease cap, that when you do install this on it makes lubricating your bearings very fast and easy. Basically you just pop out the middle which is just a rubber plug and that gives you access to that zerk fitting on the easy-lube spindle. You put your grease gun in, connect it, and pump grease right in there, no need to disassemble the hub to get to your bearings. It includes everything shown here.

As I mentioned it comes with the bearing races already pre-installed, both outer and inner bearing race. Comes with the pre-greased bearings, both outer and inner. Even the pre-installed grease seal on the back, it's all ready to go. Comes with, I mentioned, the zinc plated EZ Lube grease cap with the rubber plug. Then the five, half inch, lug nuts. The hub itself is a sturdy iron construction.

It has a nice zinc enriched paint finish over the whole thing. It is certified by US SAE standards and CSA standards, which are the Canadian standards. Again the application on this is for 3500 pound EZ Lube trailer axles with the #84 spindles. It is compatible with axles from most manufacturers including Dexter, Lippert, and AL-KO. The hub flange diameter, which is the measurement across here from this side to this side, is six and a half inches. Because of that measurement it does require thirteen inch and larger wheels to go on here.

The bolt pattern again is five on four and a half inch bolt pattern. The wheel stud size is half inch by twenty and the weight capacity is 1750 pounds per hub. When this is matched with a hub on the other side of your axle it will meet your 3500 pound max limit on the axle. Again, the parts I mentioned that are already installed in there. The inner bearing, which is in the back here that's a part number L68149. The grease seal that holds it in is an overall diameter grease seal of 2.565. The outer bearing is the part number L44649. Then the zinc plated grease cap, the EZ Lube grease cap, with the rubber plug has a flange diameter of 1.99 inches. It does come with the five lug nuts which are a half inch by twenty size, those would be used to hold your wheel and tire assembly to the hub itself. Once you put your wheel up on the studs you just go ahead and put your lug nuts on. Then go ahead and tighten them down and torque them to the correct specs for your application. That should do it for the review of the pre-greased trailer idler hub assembly for 3500 pound EZ Lube axles with the five on four and a half inch bolt pattern. .


Customer Reviews

Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Pre-Greased - AKIHUB-545-35-PG-EZK

Average Customer Rating:  4.9 out of 5 stars   (19 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Pre-greased for easy installation.

- AKIHUB-545-35-PG-EZK
by:

Exactly what I needed, showed up in 2 days. Make sure when you pull off the protective cap you take it slow, my pregreased bearing popped out and landed right in a pile of dirt. 634062



- AKIHUB-545-35-PG-EZK
by:

Outstanding service. The product looks great. Would highly recommend etrailer for all trailer parts. 429369


Comments

Product works great no problems in last year

Mike - 09/06/2018

43273

- AKIHUB-545-35-PG-EZK
by:

Ordered 2 of these hubs to fix a trailer that was damaged in an accident. Along with the order was 2 Provider wheels with modular rims. Order arrived in 3 days. Wheels looked perfect. Put the hubs on the other night and they went on easy except for one of the dust caps (more on this later). Was so much faster to put prelubed hubs on. I hate packing bearings. Only reason for 4 stars was the one hub dust cap was BENT into an oval from being shipped loose in a box with 2 loose hubs. They should had been packed in a smaller box in the box the hubs were in. I did get it round enough for me to install it, but I shouldn't have to be doing "body work" on a dust cover. 522049



- AKIHUB-545-35-PG-EZK
by:

etrailer comes through again. Delivery was on time. Parts were correct. Shipping packaging was completely intact. Thanks etrailer! Ted from Pennsylvania. 441913


Comments

Spindle seals had to be replaced at less than 3,000 miles. Adequate high quality grease was used and only limited submersion.

Ted C - 10/12/2018

44524

- AKIHUB-545-35-PG-EZK
by:

Received what was ordered. Tammie was great in helping order the correct idler hubs for my trailer. Great Customer service. Due to the weather here on Long Island NY for the last week (Soaking Rains) i have been unable to install the hubs. 509591



- AKIHUB-545-35-PG-EZK
by:

As usual with etrailer, my order was shipped quickly and all the items were exactly as they were ordered. 655046



- AKIHUB-545-35-PG-EZK
by:

One damm good place to shop! 578718



- AKIHUB-545-35-PG-EZK
by:

Arrived today, earlier than predicted. Hubs are marked “China,” which is not surprising at this price point, but I’d pay more for USA product. Troy was great! He helped confirm that my selection is correct. I’ll add to this review after installation. 571706



- AKIHUB-545-35-PG-EZK
by:

Parts were well packed & worked great! Amanda at Etrailer was awesome to deal with! 523842



- AKIHUB-545-35-PG-EZK
by:

Great product, worked as advertised. Easy to install. 508449



- AKIHUB-545-35-PG-EZK
by:

Thanks to Michael H. for the technical advice! This is going to stay stashed in the tool box as a spare, but I double checked the bearing numbers against the factory Lippert idler hub. This is a direct replacement for their 3500 lb axle assemblies. It comes with plastic caps to keep dirt and dust out and the grease in. 482285



- AKIHUB-545-35-PG-EZK
by:

Can't beat the price or the quality. 479555



- AKIHUB-545-35-PG-EZK
by:

Ready to go in an emergency, I carry it as a spare when I'm travelling the backroads. Great product! 470592



- AKIHUB-545-35-PG-EZK
by:

My product came very Fast and was exactly what I orderd Kelsy From sales was very Helpful. 407219



- AKIHUB-545-35-PG-EZK
by:

The hubs look great! I put them on a boat trailer. They are galvanized and more heavy duty than the OEM hubs. The races were pre-installed. It even came with the easy lube hubcap and lug nuts. The fitment was spot on. Finding the correct hub can be a challenge and Amanda was a huge help! She knows her products well and was patient with my questions. Ordered on Saturday and received the hubs the following Wednesday. Thanks!! 344218



- AKIHUB-545-35-PG-EZK
by:

20 year old utility trailer blew tire on 7 hour trip and damaged wheel bearings on blown side. Spare saved the day, but needed new tires all the way around. Hubs, posts, and rims were rusted so decided to replace everything. Tire/Rim combination was cheaper than just tire replacement at Wally World, so it was a no-brainer. Wheels look great and pre-greased hubs went on without a hitch. Ordering from etrailer couldn't be easier and components at this price point and quality can't be beat. I couldn't be happier. 311792



- AKIHUB-545-35-PG-EZK
by:

ordered new hubs for trailer,they look great,perfect match for the old ones.Have not installed them yet. Delivery was very fast. would definitely buy from this company again. 271643



- AKIHUB-545-35-PG-EZK
by:

I found this site and after trying to determine which hub assy to order I called and talked to a CSR and he was extremely helpful. I was out of town and couldn't see my old hub but when I returned home I already had the right information to order the right hub. When I received my order my dust cap was malformed and no plug was included. I sent an email and within days replacements arrived. Only one trip on the new hub but it fit perfectly and I'm am extremely satisfied with this company. 271222



- AKIHUB-545-35-PG-EZK
by:

Great company. Quick service and if you have a problem they will take care for it. Give them a 5 star rating. 260423


19
19

Ask the Experts about this etrailer Trailer Hubs and Drums
Do you have a question about this Trailer Hubs and Drum?



Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Written by:
Alexander C
Photos by:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924