bing tracking image
  1. Trailer Hubs and Drums
  2. Redline
  3. 8 on 8 Inch
  4. For 6000 lbs Axles
  5. Hub
  6. Agricultural
Trailer Hub Assembly - 8 on 8" - 6,000 lb

Trailer Hub Assembly - 8 on 8" - 6,000 lb

Our Price: $195.54
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 32 lbs
Redline For 6000 lbs Axles Trailer Hubs and Drums - AH60880FCOMP
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
Great Prices for the best trailer hubs and drums from Redline. Trailer Hub Assembly - 8 on 8" - 6,000 lb part number AH60880FCOMP can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Trailer Hubs and Drums

  • 8 on 8 Inch
  • For 6000 lbs Axles
  • Hub
  • Agricultural
  • 5/8 Inch Stud
  • 501349
  • 506849
  • Redline


  • Agricultural hub
  • Inner (506849) and outer bearing (501349)
  • Outer Race
  • Grease seal and cap
  • Hex wheel nut - RH
  • Stud diameter: 5/8"

Use with spindle (AS6000F)

AH60880FCOMP Trailer Hub Assembly - 8 on 8" - 6,000 lb

Item # AH60880FCOMP

Video of Trailer Hub Assembly - 8 on 8" - 6,000 lb

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Redline Trailer Hubs and Drums - Hub - AH60880FCOMP Review

Today were going to review part number AH60880FCOMP this is a Dexter Trailer Agricultural Hub Assembly for an 8 on 8-inch bolt pattern and a 6000-lb axle. This is an agricultural hub. It is to be used with a spindle part number AS6000F. Now this part does come with eight of the 5/8-inch cone seat lug nuts, it does come with the grease seal and the grease cap. It does come with the inner bearing which is part number 506849 and it does come with the outer bearing which is part number 501349. Now the bearing races are included also.

They are already installed into the hub. Right here is our outer bearing race and on the back you can see the inner bearing race. All of our hub assemblies will come with the bearing races preinstalled in the hubs. Now this agricultural hub does have an eight lug 8-inch bolt pattern. normally on a bolt patter that have an even number of lugs like in this case eight, you can just measure from the center of one stud directly across to the center of the stud opposite.

In this case because that center is too tall you wont get a correct measurement. What you can do then is just take a measurement from the center of one lug wheel stud to the center of a stud right next to it. So in this case if you measure center to center it will be 3 inches. If youd measure that that will determine that this an 8 on 8-inch bolt pattern. And that should do it for our review on part number part number AH60880FCOMP..

Customer Satisfaction Score:

Customer Reviews

Trailer Hub Assembly - 8 on 8" - 6,000 lb - AH60880FCOMP

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)


Great price . Fast shipping. Will be using as an axle on a tile cart spool to unwrap field drainage tile.



See what our Experts say about this Redline Trailer Hubs and Drums

  • Do Agricultural Hubs Spin More Freely Than Standard Hubs
    You are not going to see much difference in the drag or how easily an agricultural hub spins compared to a standard hub. I will say since agricultural hubs are designed for low speed machinery they are not rated for high speeds like standard hubs are. The amount of drag really comes into play when you are referring to hubs and drums with brakes. Since you are using an idler hub like part # AH60880FCOMP for your application then you won't really see a difference in the spin.
    view full answer...
  • Height of 6K Redline Trailer Hub Assembly with 8 on 8" Bolt Pattern
    I believe you are referring to the height of the Trailer Hub Assembly # AH60880FCOMP when it is standing on end as the "disc" part of the hub would naturally be larger than 8" due to the 8 on 8" bolt pattern. I went out to the warehouse and found that this measures about 5-1/2".
    view full answer...
  • Size of Hub Bore for Agricultural Hub AH60880FCOMP
    The Trailer Hub Assembly # AH60880FCOMP has an inner bore diameter of 3.125 inches. However, to answer your question about the wheels and tires, there are no wheels we carry (or have access to) which have an 8 on 8 bolt pattern as we mostly deal in products for recreational vehicles. I also want to mention that for agricultural hubs like these, they are generally for lower speed applications and the manufacturer does say they are not to exceed 20 mph. I have added a link to a video review...
    view full answer...
  • Pilot Diameter of Trailer Hub Assembly AH60880FCOMP
    The Trailer Hub Assembly # AH60880FCOMP has an inner pilot bore diameter of 3.125 inches.
    view full answer...
  • Replacement Studs for Trailer Hub # AH60880FCOMP
    For replacement wheel studs for the Trailer Hub Assembly # AH60880FCOMP that you referenced you would want the # 7-232 and you'd be set. These are 2-3/4 inches long, 5/8 inch diameter and have a spline length of .31 inch.
    view full answer...
  • Can Trailer Hub Assembly AH60880FCOMP Fit Spindle That Uses Inner Bearing 25580?
    No, the Trailer Hub Assembly # AH60880FCOMP uses inner bearing # 506849 which has and I.D. of 2.165" where the # 25580 inner bearing your spindle uses has an I.D. of 1.750" meaning these bearings are not interchangeable. There are quite a few hub assemblies that do use the # 25580 inner bearing you mentioned so I link a page showing all of these hubs, but if you can tell me the bolt pattern of your current wheels I would be happy to make a recommendation for you.
    view full answer...
  • What Type of Steel is TruRyde TRU67FR Spindle Constructed Of?
    The TruRyde # TRU67FR spindle you'd asked about is constructed of cold rolled 1045 bar stock. The spindles is compatible with the # AH60880FCOMP hub.
    view full answer...
  • Spindle for Agricultural Trailer Hub
    We do have the # TRU67FR spindle available. It's what you're looking for to go with the # AH60880FCOMP hub.
    view full answer...
  • How To Grease the 8 on 8 Inch Trailer Hub Assembly Part AH60880FCOMP
    The Trailer Hub Assembly part # AH60880FCOMP will be lubricated by packing the bearings with wheel bearing grease part # L11380 and a bearing packer part # L70025. That said, there is not any sort of grease fitting on this hub or any trailer hub I am aware of for that matter as this is just not common practice. If a grease fitting is present, it will be located on the end of the spindle but this is only for select axles. The majority of older trailers will be lubricated by hand.
    view full answer...
  • Determining Which Replacement Hub Fits 1000 Gallon Water Wagon
    We may have a hub that will work for you, but I will need to know what bearings your current hubs use. To do this you will need to remove one of the current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649. If your bearings are worn to the point that you cannot read the bearing numbers then you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram....
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Agricultural Spindle and Hub Combinations with 6 on 6 Inch and 8 on 8 Inch Bolt Patterns
    The correct trailer hub to use with the Agricultural Spindle part # TRU67FR is the Trailer Hub Assembly part # AH60880FCOMP which features an 8 on 8" bolt pattern. The Dexter Trailer Idler Hub Assembly part # 42660UC1 will not fit the Agricultural Spindle part # TRU67FR but it will fit the EZ Lube Spindle part # TRU37FR. We also have the Agricultural Spindle part # TRU34FR which can be paired with the Complete Agricultural Hub Assembly part # AH30660FCOMP. I have attached the pairs for...
    view full answer...
  • Compatibility of TRU67FR Spindle and Dexter 42655UC1 Idler Hub
    We carry the # AS6000F spindle as part # TRU67FR. The spindle and the # 42655UC1 hub you mentioned aren't compatible. If you wanted to use the # TRU67FR (AS6000F) spindle, you'd need to use the compatible hub which is part # AH60880FCOMP. This is an agricultural hub which isn't meant for higher speed road use, and has an 8 on 8 bolt pattern which is pretty much relegated to farm equipment. If you need a spindle that's compatible with the # 42655UC1 hub, which has a more commonly used...
    view full answer...
  • Spindle and Hub for 6,000 Pound Axle
    You will want part # TRU57FR for your standard spindle that is compatible with the hub # AKIHUB-655-6-K you mentioned. Another option is # TRU67FR which is an agricultural spindle to fit the 6k capacity. The hub compatible with this spindle is the # AH60880FCOMP.
    view full answer...
  • Available 8-Lug Trailer Hubs for Spindle TRU67FR
    None of the available 8-on-6-1/2 hubs use the bearings required for a fit on agricultural spindle # TRU67FR. That spindle requires a hub that uses bearings 506849 and 501349. We have one hub that fits that spindle, part # AH60880FCOMP, but this has an 8-on-8 bolt pattern. We do offer trailer hubs with the 8-on-6-1/2 wheel bolt pattern. These include both hub/drums like Dexter # 42866UC3-EZ and idler hubs like # 42865-KIT and all appear on the linked page.
    view full answer...
  • Will 8 On 8 Inch Hub Work With Timbren Axle-Less Suspension System
    Unfortunately, the Trailer Hub Item # AH60880FCOMP will not fit the spindles of the Timbren Axle-less Suspension System, Item # TASR7KS02. Like you pointed out, this is the only 8 on 8 inch hub option we have for you. We do have other hub options that would fit the Timbren Axle-less Suspension System, Item # TASR7KS02, like Trailer Hub and Drum Assembly, Item # AKHD-865-7-2-EZ-K, but they are 8 on 6-1/2. Please let me know if I can help you with any other questions.
    view full answer...

Do you have a question about this Trailer Hubs and Drum?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Updated by:
Laura H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.