Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Item # AH15450ECOMP

lowest price pledge

Retail:$69.31

Our Price: $57.71

You Save: 17%
Trailer Hubs and Drums

Orders above $99 qualify for Free Shipping

Shipping Weight: 9 lbs

Quantity: 
In Stock, Ships Today
Agricultural Hub Assembly 4 Bolt 5 Inch Circle
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • 4 on 5 Inch
  • For 3000 lbs Axles
  • Hub
  • Agricultural
  • LM67048
  • Redline
  • LM11949
  • 1/2 Inch Stud
Lowest Prices for the best trailer hubs and drums from Redline. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural part number AH15450ECOMP can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (3)
  • Q & A (32)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Trailer Hubs and Drums - AH15450ECOMP


Trailer Hub with Bearings, Races and Seal

  • Capacity of 1,500 lbs.
  • Use with spindle # AS1500E
  • Includes LM67048 inner bearing, LM11949 outer bearing, grease seal (2.332" OD x 1.50" ID), and grease cap (1.957")

Agricultural hubs and spindles in the most popular bolt patterns for use in building or repairing implement wagons, carts or machinery. Agricultural hubs and spindles are designed for low-speed applications; weight capacities shown for speeds not to exceed 20 mph.



AH15450ECOMP Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural







Video of Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Hubs and Drums - Hub - AH15450ECOMP Review

Today, we're going to review part number AH15450ECOMP. This is a Dexter Agricultural Trailer Hub Assembly for a 3000-pound axle. This trailer hub has a capacity of 1500 pounds. When used with another hub on this other side of the axle would give you the maximum of 3000 pounds. This is designed for use with a spindle, part number AS1500E. Now, this part does come with the grease cap.

It does come with the 1-1/2-inch inside diameter grease seal. It comes with the inner bearing, part number LM67048. It comes with the outer bearing, part number LM11949 and it comes with four of the 1/2-inch wheel bolt to attach the wheel to the hub. Now, agricultural hubs like this and agricultural spindles are used mostly in building or repairing implement wagons, carts, or machinery. The agricultural hubs and spindles are designed for low-speed applications, the weight capacity shown for speeds not to exceed 20 miles per hours.

Now, this agricultural hub has a bolt pattern of 4 on 5-inch bolt pattern. So basically, the way you would measure that is on a bolt pattern that has an even number of lugs. It would be, in this case, four. You just measure directly from the center of one hole directly across to the center of the other hole. So in this case, if we go across from center to center, it would be 5 inches.

So this will be a four-lug, 5-inch bolt pattern. And that should do it for review on part number AH15450ECOMP.


Customer Reviews

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)


- AH15450ECOMP
by:

Review the Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP and axel stub worked as advertised and could not expect more. would purchase again. 305431



- AH15450ECOMP
by:

Fast shipping and product was just as d escribed 175114



- AH15450ECOMP
by:

I can't believe how fast I got it.It save my plow days no delay at all!!! 57746


3
3

Ask the Experts about this Redline Trailer Hubs and Drums


  • Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
  • It sounds like you are in need of an agricultural hub like the part # AH15450ECOMP that has a diameter of .75 where the inner bearing rides and 1.25 inches where the outer bearing rides. This hub has a 4 on 4 inch bolt pattern so if you needed one with a 5 on 4-1/2 inch bolt pattern you would want the part # T1721400042.
    view full answer...

  • Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
  • The only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # AS1500E. If you can find the actual bearing number on your old bearings and seal or can send me a bearing...
    view full answer...

  • Replacement Hubs for Old Trailer That Uses Inner and Outer Bearing LM67048
  • First, thank you for providing those important details about your trailer. Bearing part # LM67048 is a common OUTER bearing for 6- and 8-lug hubs, but as an INNER bearing we offer only one 4-on-5 agricultural hub that takes this item as its inner bearing. That hub is part # AH15450ECOMP. I presume that you got the bearing part numbers from the original parts. Given the trailer's age it may be that someone previously substituted a different bearing for what was originally installed....
    view full answer...

  • Replacement Trailer Hub that Uses Bearings with Inner Diameters of 1.25 and 0.75 Inches
  • Based on the measurements you have provided hub # AH15450ECOMP is a close match. The bearings that it uses fit on spindles with the measurements you have provided. But the seal has an inner diameter of 1-1/2 inches. It is not uncommon for the seal inner diameter to be smaller to provide a tight fit. This is an agricultural hub so it isn't very common and being an aggie hub means it is limited to 20 miles per hour. It might be more beneficial to replace the axle on the trailer to get...
    view full answer...

  • Availability of Hub for LM11949 Bearing
  • Is both your inner and outer bearing the same part number? The only hub we offer that uses a LM11949 bearing would be the # AH15450ECOMP agricultural hub assembly, but it used a LM67048 inner bearing, which has a 1.25 inch inner diameter. An agricultural hub is typically used on farm equipment for low speed applications, under 20 mph or less.
    view full answer...

  • Replacement Trailer Spindles to Allow Installation of Different Hubs
  • All of the trailer spindles we sell are weld-on types, including those with brake flanges like Redline # R20384EZ that fits 1.75-inch diameter axles. The largest diameter spindle we sell is for a 2-1/4-inch axle beam, part # R50342EZ; this can be seen on the link provided. This spindle is for a 5200-lb axle and it has a 5-bolt brake mounting flange. It is almost surely going to be easier and less expensive for you to replace your axles than to have a professional welder install new spindles...
    view full answer...

  • Replacement Hub Assembly for Tapered 3/4 spindle
  • We do have one hub that will work with 3/4 inch spindle # AS1500E, but this particular spindle measures larger than 1-1/16 inches towards the axle and does not work with the same bearings. The hub, # AH15450ECOMP, also has a 4 on 5 bolt pattern. The grease seal is also going to depend on the measurements of your spindle and we do not have any matching the dimensions you gave. We do have the correct replacement bearings # LM11949 with matching race # LM11910 and # L44649 with matching...
    view full answer...

  • Availability of Trailer Hub with 4 on 5 inch Bolt Pattern
  • If you do indeed have a 4 on 5 inch bolt pattern we have one hub that matches that. For that you would need the part # AH15450ECOMP. There is a better chance that you have a 4 on 4 inch bolt pattern as that is the most common 4 bolt mounting pattern. I attached a help article on determining bolt patterns as well. You should also note that when picking out a hub for an axle you have to make sure you pick one that will fit the spindle. To do this you need to measure the spindle where...
    view full answer...

  • Hub Assembly Needed for Bearings with 0.75 and 1.25 Inner Diameter
  • If the inner diameter of your bearings are 0.750" and 1.250" then we do have a few hubs for you to choose from. It is important to make sure that a digital caliper like part # 301-17068 be used to get an exact reading to the 3rd decimal place (1.234 for example). For the measurements you gave we have the Titan Trailer Hub Assembly # T1721400042 which has a 5 on 4-1/2" bolt pattern and a seal inner diameter of 1.688" as well as the Redline Trailer Hub Assembly # AH15450ECOMP which has...
    view full answer...

  • How to Select Replacement Trailer Hubs
  • Thank you for submitting your photo of your trailer spindles. To select compatible replacement hubs that have the 5-on-4-1/2-inch bolt pattern you want you will need to match up several characteristics to your existing hubs. You will need to match the axle's capacity and also either the bearing numbers or bearing diameters, as you have provided. I was able to find only a little information about the bearings (axle cone runners) you referenced, parts 909501 and 909502. They reportedly...
    view full answer...

  • Replacement Hub for a 3/4 Inch Diameter Straight Spindle
  • The only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # AS1500E. If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may...
    view full answer...

  • Recommended Replacements for a Trailer Hub With an LM67048 Inner Bearing and LM11949 Outer Bearing
  • It sounds like you have an agricultural style hub, like our part # AH15450ECOMP. In reality, replacement items are available for your current setup, but because you mention that this a boat trailer, your best option would really be to switch out to an EZ-Lube assembly. The current agricultural hub might hold up if you are just submerging them once or twice a season, but for repeated use you will really want to switch out the spindle, hub, and wheels. I would recommend going with...
    view full answer...

  • Availability of Hubs That Use Inner Bearing LM67048 and Outer Bearing LM11949
  • We do not have any hubs or hub/drums in a 5-on-4-1/2 bolt pattern that use your particular bearings. The bearings in a replacement hub must match those in your originals in order for the hub to fit on your spindles. We do offer one idler hub that uses inner bearing LM67048 and outer bearing LM11949 and that is 4-on-5 bolt pattern agricultural idler hub # AH15450ECOMP. This hub kit includes bearings, races and a grease seal and it is rated for off-road use up to 20-mph.
    view full answer...

  • Trailer Hub that Uses Inner Bearing LM67048 and Outer Bearing LM11949
  • Sounds like you may have an older setup. If so you may need breaks and drums. All of the drums we carry for 3500 lbs axles are going to be 2 " deep. To get the correct drum we will need the bearing numbers and the spindle dimensions or we cannot guarantee that the drum assembly will fit. If you can provide that information we will be glad to make a recommendation.
    view full answer...

  • Replacement Axle Kit for Homemade Trailer
  • My research indicates Timken bearing 3062 has an inner bore diameter of 0.6250-inches, which is very small compared to the bearing and hub products we offer. The smallest bearing we offer has an inner diameter of 0.750-inches and is part # LM11949. This is rated for hubs used on 3000-lb axles. We have no hubs that use smaller bearings like yours. You may find it easier to replace your entire axle with a kit that includes hubs, bearings, races, seals, etc. I linked our page for axles...
    view full answer...

  • What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMP
  • I pulled the Dexter Hub Assembly, # AH15450ECOMP, from the warehouse and made a simple diagram showing the outer dimensions for you to check out, see photo. This hub comes with the bearings, seal, grease cap and lug bolts. This hub fits spindle # AS1500E. If you are not sure what spindle you have or if this hub will fit on your spindle, then you can compare the part numbers of your current bearings to those with this hub assembly or you can take a few measurements of your spindle. The...
    view full answer...

  • Recommended Replacement Trailer Wheel and Hub for Old 4 on 5 Inch Agricultural Hub
  • Unfortunately we don't have any wheels with the 4 on 5 bolt pattern even though we do have one hub # AH15450ECOMP with that pattern. We have many wheels with the 4 on 4 inch, 4 on 4-1/2 inch, and 4 on 9.44 inch bolt patterns. I've linked the page to all our wheels to assist. I recommend replacing your hubs so that you can get a bolt pattern compatible with wheels that size. I have attached an article to assist with measuring if needed but you may be able to get the bearing numbers...
    view full answer...

  • How To Determine What Hub Assembly is Needed With a Bearing Inner Diameter of 3/4 Inch
  • The Dexter Trailer Hub Assembly - 4 on 4, part # 8-91-05UC1, uses the # L44649 bearing as the inner and outer bearings. The inner diameter of the bearing is 1.063 inches (1-1/16). The only bearing I have that has a 3/4 inch inner diameter is the Redline Bearing, part # LM11949, which is used as an outer bearing on the Agricultural Hub Assembly - 4 on 5, part # AH15450ECOMP. This is a hub that has a 4 on 5 inch bolt pattern and is used for low speed (less than 20 mph) agricultural applications....
    view full answer...

  • Hub Recommendation to fit Agricultural Spindle # AS1500E
  • Based on the spindle dimensions you listed it sounds like you have an agricultural spindle # AS1500E and the only hub we carry designed to fit that would be the # AH15450ECOMP. There is no way to get a 2-48 hub to fit your spindle.
    view full answer...

  • Replacement Axle Recommendation for a Snowmobile Trailer with Non Standard Hubs
  • I wish I had a hub that would work on the spindles you have on your trailer. But none of the hubs we carry work with your bearing combination. That outer bearing you have is the problem. It's usually only used on agricultural hubs like part # AH15450ECOMP. Honestly your best option would be to replace the axle. I attached a page that has all of our axles we carry that come with hubs that have 4 on 4 inch bolt patterns. You will need to know the distance between the hub faces on your...
    view full answer...

  • Which Outer Bearing Mates with Inner Bearing LM67048 on a 4-Bolt Hub
  • We have a 4-bolt hub that uses LM67048 as the inner bearing and an LM11949 bearing as the outer. That is the only hub/bearing configuration we have for an LM67048 inner bearing. It is typically a hub found in agricultural trailer applications. The hub is part # AH15450ECOMP if you want to take a look at it and see if it looks like your hub. I pulled one of the LM11949 bearings from our warehouse to measure. When measuring bearings, you really need to use a dial caliper. A tape measure...
    view full answer...

  • Looking for LM11949 Wheel Bearing and Associated LM11910 Race
  • We offer the # LM119149 wheel bearings as well as the # LM11910 races. The only hub we offer that uses the LM119149 is an agricultural hub, part # AH15450ECOMP which uses the # LM119149 as the outer bearing. If that's the hub you have, which uses the # LM67048 as the inner bearing, you'd want to use # SL150 as the grease seal. If you use a different hub, in order to recommend the correct grease seal, I'll need to know the diameter of the spindle where the grease seal rides (which will...
    view full answer...

  • Replacing the Hub on an Older Homemade Trailer With Bearing LM11949
  • The hub assembly we offer with bearing # LM11949 is an agricultural hub, # AH15450ECOMP. This hub is intended for agricultural use, and the outer bearing measurement you mentioned does not match the outer bearing used by this hub and spindle. This axle uses bearings that are nonstandard, so it may be easier for your to swap out the axle for a new one that uses standard bearings. I've added a link to a list of all our available axles to see if we have one that will work for you.
    view full answer...

  • Replacing Hubs and Wheels on 1964 Alpine Sprite Camper Trailer
  • Older classic trailers like your '64 Alpine Sprite may need new hubs in order to use the wheels and tires you wish for that vintage look. The only 4-bolt trailer hub/wheel bolt pattern we offer is the 4-on-4-inch format, like hub # AKIHUB-440-2-1K and wheel/tire # AM3S120. We do offer one agricultural hub in a 4-on-5-inch format, part # AH15450ECOMP, but this is for 3000-lb axles, much more than your trailer weighs. To use new hubs with the easy-to-find 5-on-4-1/2-inch bolt pattern you...
    view full answer...

  • Trailer Hub that Uses Inner Bearing LM67048 and Outer Bearing LM11949
  • The only hub we have that takes inner bearing LM67048 and outer bearing LM11949 is agricultural hub # AH15450ECOMP. This hub though has a 4 on 5 bolt pattern. If you used it you would have to change the wheels to match but 4 on 5 wheels are rare and we do not carry any. The other issue is that agricultural hubs are rated for a maximum of 20 miles per hour.
    view full answer...

  • Information on Bearing Number LM11949
  • This Bearing, part # LM11949, is most commonly used with the Agricultural Hub Assembly, 4 Bolt, 5 inch Circle, part # AH15450ECOMP. If you are attempting to replace existing bearings, you will just need to check your current bearings for the part number LM11949 to ensure you are ordering the correct replacement bearings.
    view full answer...

  • Determining Capacity of an Old Trailer Axle with No Information on the Axle
  • The 15123 bearing is still common but I could not find any information on the 09057 bearing. But given that your hubs have the 4 bolt pattern it is likely that the axle is rated under 3,000 pounds. Most likely it is a 2,000 pound axle. Measure the spindle where the 09057 bearing rides using calipers such as # PTW80157 I can see if there is a different bearing with the same inner diameter that is commonly used with 15123 and go from there. Since you still have the trailer frame as...
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.