Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2

Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2

Item # 99865UC3

lowest price pledge

Retail:$368.75

Our Price: $264.13

You Save: $104.62
Trailer Hubs and Drums

This item qualifies for Free Shipping

Shipping Weight: 49 lbs

Quantity: 
In Stock, Ships Today
Redline Trailer Hubs and Drums - 99865UC3
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • 8 on 6-1/2 Inch
  • For 7000 lbs Axles
  • Hub with Integrated Drum
  • Standard
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • 28580
  • Redline
  • 1/2 Inch Stud
  • 25580
Trailer hub-and-drum assembly includes lug nuts, inner bearing (28580) and race, outer bearing (25580) and race, grease cap and grease seal. Fits 7,000-lb axles. Lowest Prices for the best trailer hubs and drums from Redline. Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 part number 99865UC3 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (2)
  • Q & A (9)
  • Photos
  • Why etrailer?

Redline Trailer Hubs and Drums - 99865UC3

Trailer hub-and-drum assembly includes lug nuts, inner bearing (28580) and race, outer bearing (25580) and race, grease cap and grease seal. Fits 7,000-lb axles.


Features:

  • Application: 7,000-lb Dexter axles with #99 spindles
  • Works with both electric and hydraulic brakes
  • Drum dimensions: 12" diameter x 2" wide
  • Bolt pattern: 8 on 6-1/2"
  • Includes bearings, races, seal, grease cap, wheel bolts and lug nuts
    • Stud diameter: 1/2"
    • Bearings:
      • Inner bearing: 28580
      • Outer bearing: 25580
    • Grease seal: T51153
      • Outer diameter: 3.623"
      • Inner diameter: 2.375"
    • Grease cap: 3.355" outer diameter
  • Capacity: 3,500 lbs


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"




99865UC3 Trailer Hub and Drum








Customer Reviews

Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 - 99865UC3

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Trailer hub-and-drum assembly includes lug nuts, inner bearing (28580) and race, outer bearing (25580) and race, grease cap and grease seal. Fits 7,000-lb axles.

- 99865UC3
by:

Thank you again for the great service and prompt delivery! Product was exact as ordered and on trailer ready to go fish Aloha and Happy Thanksgiving 584463



- 99865UC3
by:

Every thing fit. 162170


2
2

Ask the Experts about this Redline Trailer Hubs and Drums

Do you have a question about this Trailer Hubs and Drum?


  • Self-Adjusting Brake Assemblies Compatible with AL-KO 7200 Drums
  • The Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA will fit an AL-KO 7200 drum. These brakes will not require maintenance adjustments as the shoes wear over time because they will automatically adjust as needed to give you the best braking function. Those hubs are discontinued and uniquely sized to fit the 99 spindle, so if you need replacement hubs compatible we have the Trailer Hub and Drum Assembly - 7,000-lb Axles -...
    view full answer...

  • Axle Capacity with Bearings 28580 and 25580 with Seal SKF23839
  • The Replacement Trailer Hub Bearing # 25580 is traditionally the outer bearing for a #99 spindle with the inner bearing # 28580. For instance the Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 # 99865UC3 is a fit for your axle and is intended for the 7,000 lb axle which is what I assume you have. Both the bearings and grease seal are a confirmed replacement.
    view full answer...

  • Replacement Hub Recommendation for an AL KO 7200 Axle
  • I did some digging on your AL KO 7,200 lb axle and it has bearings # 28580 and # 25580 which means you have a 99 spindle. The only hub we offer that will fit this setup is the part # 99865UC3 which is a similar Titan hub but has an 8 on 6-1/2 inch bolt pattern instead.
    view full answer...

  • How to Choose the Correct Hub and Drum Assembly for a 7,000 Pound Axle
  • We can figure out which hub and drum assembly that you'll need without emailing pictures. Nonetheless, you can certainly send them to my email if additional details are necessary. Here's what you'll need to choose the correct hub and drums for your trailer. Start off with determining the bolt pattern of your hubs. Check out the attached link that provides details on how to do this. The typical bolt pattern for a 7,000 pound axle is 8 on 6-1/2 inch by the way. After that we'll...
    view full answer...

  • What Comes with the Trailer Hub & Drum Assembly, # 99865UC3
  • On the Trailer Hub & Drum Assembly, # 99865UC3, you will get 1 hub and drum assembly, 1 inner bearing # 28580, 1 outer bearing # 25580, 1 grease seal # T51153, 1 grease cap, and 8 lug nuts. The last picture on the product page shows the bearings, seal, cap, and lug nuts.
    view full answer...

  • 8 Lug Hub Recommendation that has 28580 Inner Bearing and 25580 Outer Bearing
  • For an 8 lug hub with a 28580 inner bearing and a 25580 outer bearing you would want the Trailer Hub and Drum Assembly # 99865UC3. The seal of this hub is a T51153 like you need as well.
    view full answer...

  • Can a 6K Rated Hub and Drum be Used on a ALKO 7,200 Pound Trailer Axle
  • Titan hub and drum # T1870000042 might fit your trailer axle but it is rated for 6,000 pound axles. If yours is a 7,200 pound axle then I do not recommend using an under rated hub. Or, if you do use an under rated hub you are limited to the lower rating. A co-worker has found that your ALKO hub uses bearings 28580 and 25580. We have 1 hub that uses these bearings, # 99865UC3. It also uses grease seal T51153 with an outer diameter of 3.623 inches and inner diameter of 2.375 inches. It...
    view full answer...

  • Recommended Brake Assemblies with Backing Plate For 12 Inch Hub/Drum Assembly
  • For your Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 # 99865UC3, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. These assemblies come with the backing plate and have a 5 hole mount pattern to connect to your axle flange. They need to be adjusted at installation, but after initial adjustment will self-adjust to give you maximum braking performance. For the mounting hardware, I recommend the...
    view full answer...

  • How to Measure AL-KO Axle Spindle for Correct Replacement Hub
  • The Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 # 99865UC3 is the correct fit for 7,000 lb Dexter axles with #99 spindles only. Dexter bought out AL-KO years ago, so they are the most similar fit. AL-KO had some axles that were only compatible with certain brake assemblies and hubs. To determine the correct fit for your spindles, there are a couple options. If you can give me the bearing and seal numbers then I can help you find the correct replacement. These numbers...
    view full answer...


Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.