Hub is designed for use on trailer idler axles. Fits 2,200-lb axles with BTR spindles. Races included. Tapped for 1/2" wheel bolts. For 13" to 15" wheels.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today we're going to take a look at this Dexter Trailer Idler Hub with the 5 on 4.5-inch bolt pattern for 2200 pound axles.Now the application for this hub is to fit the 2200 pound trailer axles that have the BTR spindles. This hub is a sturdy iron construction, and it is designed to fit Idler axles. Now the bearing races, if you can see are already pre-installed, they are included, have the inner bearing race right here, and then the outer bearing race right here. The lug holes, if you noticed, they are tapped for half-inch diameter wheel bolts.
Now the bearings that are going to be used on this, they are sold separately. They use both the same part number inner and outer bearing, and that's part number L44649. And then the grease seal that goes on the back here, again that's sold separately and it's part number 10-9.A few specs on this. The hub flange diameter, which is measured from this side all the way to this side, is six and a half inches so that means this will work with wheel sizes, 13 inch to 15 inch size. The bolt pattern, again we mentioned is a 5 on 4.5-inch bolt pattern, bolt hole diameter, half an inch, and the weight capacity on this one Idler hub is 1100 pounds so when this is used with one on the other side of the axle, it'll meet your 2200 pound axle rating.But that should do it for the review on the Dexter Trailer Idler Hub with the 5 on 4.5-inch bolt pattern for 2200 pound axles..
Great product would buy and use again.
Fit perfect
Good product, fast shipping
Complete package. Makes ordering simple.
GOOD DEAL SHIPPED SAME DAY!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.