Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

Item # 84550BX

lowest price pledge

Our Price: $50.82

Trailer Hubs and Drums

Orders above $99 qualify for Free Shipping

Shipping Weight: 8 lbs

Quantity: 
In Stock, Ships Today
Dexter Axle Hub - 84550BX
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • 5 on 5 Inch
  • For 3500 lbs Axles
  • Hub
  • Standard
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Dexter Axle
  • L68149
  • L44649
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Pre-greased for easy installation. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased part number 84550BX can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (35)
  • Q & A (29)
  • Videos (2)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 84550BX

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Pre-greased for easy installation.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Sturdy iron construction
  • Pre-greased idler hub is easy to install - no need to pack bearings
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb trailer axles with #84 spindles
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 5"
  • Grease cap flange diameter: 1.986"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,750 lbs


Exploded View

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-256-91 Dexter Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 5 - Pre-Packed and Assembled

Replaces 84550UC1 and 84550BX







Video of Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Trailer Hubs and Drums - Hub - 84550BX Review


Customer Reviews

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased - 84550BX

Average Customer Rating:  4.9 out of 5 stars   (35 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Pre-greased for easy installation.

- 84550BX
by:

Item arrived exactly as described, assembled, greased and ready to be installed. I literally took it out of the box, removed the plastic protective caps, and slipped it over the axle stub. It fit perfectly and works great. Very pleased with product cost, fast shipping and ease of installation. 523174


Comments

No issues what-so-ever. Working perfectly with no complaints.

TREGG G - 06/18/2019

56807

- 84550BX
by:

Went on smooth, no issues so far, the cover was a little tough getting on, so I'm sure it'll be fun taking back off to grease. Still, I'd rather have a tight seal. Quality of the bearings, and hub seem to be above par. 607638



- 84550BX
by:

I was looking for idler hub assemblies for my 6' x 12' utility trailer. Apparently 5 studs on 5" circle is not that common. Most trailers are 5 on 4.5. The entire experience with etrailer was great. They helped me with the selection of the idler hub assemblies and assured me I was selecting the correct hub assembly based on the bearing numbers that came out. The ordering was slick, especially with PayPal, and the least expensive delivery method was fast. Ordered them on a Thursday and UPS delivered them Monday morning. Excellent quality and a fair price. Will definitely use trailer.com again. 598022



- 84550BX
by:

Installed easily, glad it's pre-greased. Great deal! Shipping from e-trailer was fast. Other websites didn't provide enough info to know if I was ordering the right part. etrailer did a good job of describing what was being purchased so they won my business. 610020



- 84550BX
by:

Easy to order, arrived quickly, everything was as described on the product page. Couldn’t be happier 679945



- 84550BX
by:

I received exactly what I wanted and fast! Quality is good and so is service! 667690



- 84550BX
by:

Hub was exactly as described and was shipped in a very timely matter. 653848



- 84550BX
by:

Excellent product and value 638254



- 84550BX
by:

These folks are tops Fast shipping and if you have any trouble they fix it immediately.... what more could you ask for Good prices ?they got em 580700



- 84550BX
by:

Thrilled that it arrived so fast. 502486



- 84550BX
by:

Arrived on time and had parts needed to complete the repair. 494205



- 84550BX
by:

Presently surprised that the hubs came pre-greased. Didn't say so when I ordered it. Worked out perfectly! 442939



- 84550BX
by:

I thank you for taking time selecting the correct hub and barring assembly for my trailer. The hub arrived on time for me to make repairs and to go fishing the next day. 410658



- 84550BX
by:

Great company to do business with.All items purchased were of good quality. 412056



- 84550BX
by:

I couldn't be happier with the service, ease of ordering and how fast my hub was shipped, I ordered my hub in a Monday and received it the next day. Everything fit like it should and I will be a repeat customer. Thank you guys so much. 363140



- 84550BX
by:

Fast delivery Perfect for my custom t railer. 305473



- 84550BX
by:

This was a complete kit, all the pieces were included and there were no surprises. This was part of an axle replacement, the entire job of bolting on the axle and the hubs took less than 2 hours. I chose this hub so that I can use the truck spare tire for the trailer, too. 288421



- 84550BX
by:

The hub assembly worked great, I have been using it for a year now without any issues. Thank you for helping me with this great product. Ezequiel 283547



- 84550BX
by:

Exactly what I needed and at the lowest price I could find, then it arrived 2 day before I expected it. Great price and exceptional service, I won't even look any other place for my trailer needs. 276717



- 84550BX
by:

I have had no trouble with these hubs. 276517



- 84550BX
by:

Received items very quickly. Had a damaged hub and could only get partial info, this fit perfectly. Would do business again. 232463



- 84550BX
by:

can't speak to the product quality, haven't used it yet. but delivered as promised (very timely!) and communications were great! 204538



- 84550BX
by:

this one was in great shape. (races in correctly) 203850



- 84550BX
by:

first hub had inner race installed upside down and had to torch out race and install new one. second one i ordered was not the same and was installed properly 203572



- 84550BX
by:

Good product! Easy to install and very fast shipping. 174873



- 84550BX
by:

Good quality good price. 165969


Comments

Ive ran 1000s of miles on this product without any issues.

Steve B - 12/17/2015

16192

- 84550BX
by:

Fit prefect seems well made shipping was fast 156507



- 84550BX
by:

Quick shipping. Parts worked perfectly. Bearings included were cheap so I went to auto parts store and put better bearings in it. 156500



- 84550BX
by:

Good morning Patrick I receved the hubs and it`s perfect thank you I do with this parts , a copy of the Américaine Army trailer 416 146247


Comments

Thats an awesome trailer! Exactly what Id like to build to pull behind my JK. Im hoping these 5 on 5 hubs are the Jeep wheel pattern so I only need one spare?

-- comment by: Phil P - 03/17/2015

10093

As long as the hubs/wheels on your JK are 5 lugs on a 5-1/2 inch pattern, these hubs should be fine. The only other thing to consider is the pilot hole on the wheel clearing around the center of the hub.

-- Patrick B - 4/7/2015


- 84550BX
by:

good product arrived fast and work perf ectly 136245


Comments

I have been very satisfied with all the products that I have purchased from your store . and thanks for asking.

mike - 06/24/2015

12783

- 84550BX
by:

I needed to replace a hub with a 5x5 pattern. The only choice in this pattern was the star shaped hub. This seems to be a sturdy hub but I wish it was a full hub, seems heavy built though, time will tell if it holds up. I like that it comes complete with bearings, dust cap, seal and lug nuts. 118191



- 84550BX
by:

was delivered on time and the trailer is up and out working thank you 115592



- 84550BX
by:

Bolted on quickly and easily. Got upgraded shipping thrown in. Great place to order parts from! 99881



- 84550BX
by:

Great price on great product.Shipped so fast i haven't had time to install it.Got you bookmarked for future. 43956



- 84550BX
by:

Great store I forgot to order bearing so I was pleased when I opened the box and the bearings and seal was with the hub. 3890


37
37

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

Do you have a question about this Trailer Hubs and Drum?


  • Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter Axle
  • You can confirm the weight rating of your Dexter axle by removing one hub and pulling its bearings. The included photo shows how part numbers usually appear on bearings. The specific bearings used will tell you the axle's weight rating. Just refer to the linked article that lists the bearings commonly used for various axle weight ratings. A new hub must use the same bearings as the original hub in order to fit on your spindles. A 3500-lb axle commonly uses bearings # L68149 and #...
    view full answer...

  • Is There a Timbren Axle Less Kit Setup that Fits Jeep Wheel Bolt Pattern 5 on 5 inch
  • We have to tell you that you shouldn't use Jeep wheels on a trailer as they weren't intended for use on a trailer. That said we know people do this all the time so you'd probably be fine. We've seen people use the Timbren Axle Less kits with Jeep Wheels too. Part of why the Timbren Axle-Less Trailer Suspension System with Hubs # A12WS545 is for "off road" tires is for this purpose so it's physically possible. The Jeep wheel bolt pattern is 5 on 5 inch like what the part # 84550BX has....
    view full answer...

  • Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
  • To convert your offroad trailer to the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 you will either use a crossbrace for your trailer frame at the axle location or you will add a 2 inch square tube between the assemblies (not included) into the integrated holes of the assemblies. This will give you much more ground clearance than a standard axle and will also include the suspension needed. Unfortunately that 5,200 lb Timbren...
    view full answer...

  • 5 on 5 inch Hub Recommend for Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03
  • Yes, we do carry an idler hub and and a hub and drum assembly with a 5 on 5 inch bolt pattern that will work on the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03. For an idler hub you would want the part # 84550BX and for a hub and drum you would want the part # 84556UC3.
    view full answer...

  • 89 inch Trailer Axle, 5 on 5 inch Bolt Pattern Hub and Leaf Spring Recommendation
  • To get a 89 inch long axle you would want the part # T3584F-EZ-8974 for an axle that does not come with hubs and then for hubs you would want the part # 84556UC3 for a brake hub with a 5 on 5 inch bolt pattern or for an idler hub # 84550BX. Since this is a 3,500 lb axle you would want the same rated leaf springs. The # SP-212275 is a 3,500 lb spring that would work well for you. For a tandem axle hanger kit you would want the part # APT3 and for a u-bolt kit you would want the # APUBR-1.
    view full answer...

  • 5 on 5 inch Bolt Pattern axle Hub to Replace a 5 on 4 1/2 inch Hub on Trailer
  • You will need to remove an existing wheel and hub. Once this is done clean the bearings and seal off and record the part numbers, be sure not to mix up the numbers for the inner and outer bearings. With the bearing part numbers and seal part number we will be able to cross reference the correct hub with a 5 on 5 bolt pattern to replace your trailers 5 on 4-1/2 bolt pattern hub. If you find that you have a # L68149 inner and a # L44649 outer bearing and a # 10-19 or # 58846 seal then...
    view full answer...

  • Compatibility of Dexter 3500-lb 5-on-5 Trailer Hub # 84550BX with Redline # R2061-284 Spindle
  • The hub you referenced, Dexter 3500-lb 5-on-5 Trailer Hub # 84550BX, which comes with inner/outer bearings # L68149 and # L44649, is indeed a correct fit for the Redline # R2061-284 Spindle. For reference videos on both of these items are linked.
    view full answer...

  • Timbren Axle Less System and Hub with 5 on 5 inch Bolt Pattern Recommendation
  • First thing you will need to know to determine the correct Timbren system will be the total axle capacity you would need for your trailer. We have ones that range from 1,200 lbs up to 7,000 lbs. We don't have a ton of hubs with a 5 on 5 inch bolt pattern, but if you went with a 3,500 lb Timbren system like part # ASR3500S06 you could use the part # 84556UC3 for a hub/drum or part # 84550BX for just a hub. The # ASR3500S06 has a 4 inch lift built into it so it would be great for an...
    view full answer...

  • What is the Correct Hub Replacement for Dexter 8-208?
  • The Trailer Hub Assembly for 3,500 lb Axles, # 84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt pattern you have, please refer to the help article I have linked. You do have an option for a 5 on 4-1/2 bolt pattern with Trailer Hub Assembly, # 84545BX. It is rated for 3,500 lb axles, and this assembly contains the same inner bearings, outer...
    view full answer...

  • What Size Spindle do Bearings L68149 and L44649 fit on
  • Yes, you are going to want a spindle that has the 1.063" and 1.378" measurements. This is commonly known as a #84 spindle and can be found on our site with a few variances. For example, the Redline EZ Lube Spindle # R20384EZ comes with a brake mounting flange and a grease zerk fitting while the Redline Spindle # R20484 does not come with the flange or a zerk fitting. These fit the typical round applications but we also have one for a square application with part # SP20484. Any of...
    view full answer...

  • Replacement Wheel Hub Recommendation for Carson Trailer with 5 on 5 Bolt Pattern and 3500 LB Axle
  • If your Carson trailer uses a standard spindle, you will need the Dexter Trailer Hub Assembly, # 84550BX. This hub assembly includes lug nuts, L68149 inner bearing and race, L44649 outer bearing and race, grease cap and grease seal. If you have a grease zerk at the end of your spindle, you will need our E-Z Lube Trailer Hub Assembly, # 84550UC1-EZ. This assembly also includes lug nuts, L68149 inner bearing and race, L44649 outer bearing and race, grease seal, but this kit includes an...
    view full answer...

  • How to Correctly Determine Wheel Bolt Pattern
  • If you are attempting to determine your bolt pattern and got 2-7/8 inches for your "D" measurement (like in the accompanying diagram) it does not mean it would be 5 on 5" because it could just as easily be a 5 on 4-1/2" bolt pattern. What I recommend doing is measuring from the center of one bolt hole to the outside edge of the bolt hole farthest away from it on your wheel. This is the easiest method to determine the correct wheel bolt pattern. I have also added a link to a help article...
    view full answer...

  • Replacement Hubs for Retired Army Kassel Mfg 3/4 Ton Cargo Trailer
  • Unfortunately I can't confirm a fit for your trailer. You will need to pull a hub and get the bearing numbers or measure the spindle with a digital caliper for me to be able to confirm a fit. If you pull the hub and look at the face of the bearings, you should be able to see a number printed. That number on the inner and outer bearing of a hub will help me get your spindle compatibility. If you can't see the numbers on the bearings, then you will need to use a digital caliper like...
    view full answer...

  • Trailer Axle Solution for Military Trailer with Jeep Wrangler Bolt Pattern
  • For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 which is great for applications like yours you would want the Trailer Hub part # 84550BX that you mentioned as well. This hub includes the bearings that the Timbren you referenced is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
    view full answer...

  • Selecting Replacement Hubs and Wheels/Tires for 5 x 8-foot Utility Trailer
  • We do offer 5-on-5 hubs that you can see on the included link. All are indeed rated for 3500-lb axles as you suggested; please note that your axle should have a sticker or plate on it that tells you its weight rating. These include idler hubs (no brakes) like # 84550BX and # 84545UC1-EZ that you referenced, and hub/drum assemblies like # 84556UC3 for drum brakes. You'll need to make sure that any new hubs you select use the same inner and outer bearings as those on the trailer now....
    view full answer...

  • How to Know if a Trailer Hub with a 5 on 5 Bolt Pattern Would Fit a Trailer Spindle
  • If you take off your current hubs and find an inner bearing of L68149 and an outer bearing of L44649 then yes, you could replace the hub with a # 84550BX and you would have a 5 on 5 inch bolt pattern like you are looking for. Or, you can use a dial caliper to measure the dimensions of the spindle on your trailer. If where the inner bearing rides measures 1.38 inches and where the outer bearing rides measures 1.06 inches then this hub would fit.
    view full answer...

  • Replacement Hub for Master Pro PT A-4 and National Bearing A-17 Bearings on a Utility Trailer
  • Based on the information I could find on those 2 bearings it appears that they are the same as L44649/L68149 bearings. Hubs that take these bearings include: # 84545BX for a 5 on 4-1/2 bolt pattern # 84545UC1-EZ for an EZ lube axle and 5 on 4-1/2 bolt pattern # 84550BX for a 5 on 5 bolt pattern # 845475UC1 for a 5 on 4-3/4 bolt pattern # 845475UC1-EZ for an EZ lube axle and 5 on 4-3/4 bolt pattern # 84555UC1 for a 5 on 5-1/2 bolt pattern The star design is just a newer...
    view full answer...

  • Hub with 5 on 5 inch Bolt Pattern to Fit Timbren Axle Less Kit part # ASR2KHDS03
  • For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # 84550BX that you mentioned as well. This hub includes the bearings that the Timbren you referenced is designed to fit.
    view full answer...

  • Changing Hubs on 1953 M100 1/4-Ton Military Trailer to Match Jeep Wrangler
  • The hub kit you referenced, Dexter Trailer Hub Assembly # 84550BX, has a 5-on-5-inch bolt pattern and so would not work for your trailer 5-on-5-1/2-inch bolt pattern wheels. The link provided will take you to our main page for hub kits in the 5-on-5-1/2-inch bolt pattern where you can use the filters at the left margin to narrow the product results to those with the characteristics you need. Replacement hubs need to be selected based on several factors: bolt pattern, axle capacity and...
    view full answer...

  • Timbren Axle Less System Recommendation for Off Road Trailer with 5 on 5 inch Bolt Pattern
  • We don't have a ton of hubs with a 5 on 5 inch bolt pattern, but if you went with a 3,500 lb Timbren system like part # ASR3500S06 you could use the part # 84556UC3 for a hub/drum or part # 84550BX for just a hub. The # ASR3500S06 has a 4 inch lift built into it so it would be great for an offroad trailer.
    view full answer...

  • What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
  • The Trailer Hub Assembly # 84550BX that you referenced will use # L68149 as the inner bearing and # L44649 as the outer bearing. These are the inner and outer bearings used by a # 84 spindle. We offer the following # 84 spindles: Spindle 1.75 Inch RD x 6.5 Inch STUB # R2061-284 EZ Lube Spindle 1.75 Inch RD x 3 Inch STUB # R20384EZ Spindle 1.75 Inch RD x 4 Inch STUB # R20484 Spindle 2 Inch x 4 Inch Round Stub # R40484 Spindle 1.5 Inch SQ x 4 Inch STUB # SP20484. Out of these...
    view full answer...

  • Trailer Hub Availability with 5 on 4-1/2 inch Bolt Pattern
  • The trailer hub part # 84550BX has a 5 on 5 inch bolt pattern, for a hub that would fit the same spindle that has the 5 on 4-1/2 inch bolt pattern you would want the part # 84545BX. See review video. I attached a page that has all of the trailer rims and tires we offer that fit hubs with 5 on 4-1/2 inch bolt patterns.
    view full answer...

  • Could Hub with 1993 Jeep Wheel Bolt Pattern be Used on Military Trailer
  • A 1993 Jeep Wrangler wheel bolt pattern is 5 on 4-1/2 inches which is a standard trailer wheel bolt pattern so we are off to a good start. That said now we have to determine if there's a hub that's going to fit your trailer axle that has the correct bolt pattern like you need. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle...
    view full answer...

  • Width of Dexter 5-on-5 Idler Hub 84550BX Rated for 3500-lb Axles
  • I pulled one of the Dexter 5-on-5 Idler Hub # 84550BX from our warehouse so that I could take a few measurements for you, including the width of the hub. Please refer to the linked photo. The overall width of the hub is 4-1/8-inches measured from the trailer-side hub bore to the outside hub bore. This dimension is noted in red. From the hub face (where the wheel makes contact) to the outside hub bore is 1-3/4-inches. This dimension is noted in blue.
    view full answer...

  • Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
  • I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # 84546UC3-EZ if you have the grease zerk integrated in the spindle. Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend...
    view full answer...

  • Availability of Timbren Axle Less Kit that Fits Jeep Wheel Bolt Pattern
  • I'll need more info from you like what capacity you'd need and do you want the lifted version of the Timbren but what you are doing is possible. For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # 84550BX that you mentioned as well. This hub includes the bearings that the Timbren you referenced is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
    view full answer...

  • Dexter Trailer Idler Hub Assembly for 3,500-lb Axle Compatibility with 16 Inch Jeep Wheel
  • The Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased # 84550BX is only rated for up to 15 inch trailer wheels. The bolt pattern will match your Jeep tires, but Dexter doesn't recommend using non-trailer tires on their hubs. People do it, but vehicle tires are different than trailer tires and there are different back spacing using vehicle tires. Trailer wheels usually use a zero offset so they are directly centered on the hub face. If you are just looking...
    view full answer...

  • Availability of a 1-1/4" Thick Spindle That is Compatible with the Trailer Hub Assembly # 84550BX
  • The closest that we have to a 1-1/4" thick spindle that is at least 4" long is the Redline Spindle # SP20484 which has a 1-1/2" x 4" stub and is compatible with the Dexter Axle Trailer Hub Assembly # 84550BX which has a 5 on 5" bolt pattern and is rated for 3,500 lbs. For a spindle that matches the dimensions that you want we have the Redline # R104BTREZ but it has different bearings sizes so you will need to use the Dexter Axle Trailer Hub Assembly # 8-259-5UC1-EZ which has a 5 on 4-1/2"...
    view full answer...

  • Replacement Hub for Utility Trailer with Dexter 8-256 Hub
  • The Dexter "8-248" is a hub assembly that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in a few different bolt patterns therefore you would need to confirm your bolt pattern using the attached help article and then choosing from the list below. 5 on 4-1/2" - part # 84545BX 5 on 4-3/4" - part # 845475UC1 5 on 5" - part # 84550BX 5 on 5-1/2" - part # 84555UC1
    view full answer...


Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Lindsey S
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Mike S
Expert Research:
Robert G
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Patrick B
Installed by:
Cole B
Installed by:
Shane T
Video Edited:
Jacob T
Video Edited:
Chris R
Test Fit:
Randy B
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924