1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 5 on 4-3/4 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. EZ Lube
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-3/4

Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-3/4

Item # 845476UC3-EZ
lowest price pledge
Our Price: $86.38
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
Dexter Axle L44649 Trailer Hubs and Drums - 845476UC3-EZ
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-3/4 part number 845476UC3-EZ can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (5)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 845476UC3-EZ

  • 5 on 4-3/4 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • EZ Lube
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Dexter Axle
  • L44649
  • L68149

This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb E-Z Lube trailer axles with #84 spindles
  • Wheel size: 13" to 15"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 4-3/4"
  • Grease cap flange diameter: 1.986"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,750 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube-Compatible Hub for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


008-247-97 Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-3/4 - EZ Lube

Replaces 845476UC3-EZ





Video of Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-3/4

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 845476UC3-EZ Review

Today we're going to review part number 845476UC3-EZ. This is the Dexter trailer hub and drum assembly for 3500 pound easy lube axles with the 5-14 and 3/4-inch bolt pattern. This trailer hub and drum assembly will fit on easy lube axles with electric or hydraulic brakes. It includes everything shown here, the bearings, the bearing races, which are already pre-installed into the assembly themselves, the double up grease seal, the easy lube grease cap, and the lug nuts. This is designed to go on an easy lube axle and basically that easy lube design will make lubricating your bearings very simply. Basically what you would do after this is all installed and you have your cap installed, what you do is you remove this rubber plug, which is right in the middle of the cap here, and that will give you full access to that grease a Zerk fitting that is on the end of a spindle on an easy lube axle. With that exposed, you can put your grease gun onto that Zerk fitting, pumping your grease and that would lubricate your bearings so you don't have to be taking your hub and drum assembly off your axle.

You can do it without removing the hub and drum. Again, the application, this fits on the 3500 pound easy lube axles with electric or hydraulic brakes. The drum dimension is measured here on the inside, the 10-inch diameter by 2-1/4 inches wide, just to give you an idea here. Measure the inside. You can see there's the 10-inch diameter inside the insides and then the 2-1/4, and just put the tape on there.

You see 2-1/4 inches for the width. Basically this will fit on any brake assembly that is measured by 10 x 1/4 inches. The bolt pattern on this is 5 on 4 and 3/4. The wheels students are a half inch diameter. The capacity on this one assembly is 1750 pounds, so when you combine this with the other hub and drum assembly on the other side of the axle, will give you your 3500 pound weight capacity. The bearings it comes with, the inner bearing, which is the larger of the two is L68149.

You can see here's the inner race that's already pre-installed onto the hub and drum. Your inner bearing would fit right onto that race. You take your double grease seal and you put that in there, and you'd have to tap that in so it's a press fit. It holds everything into place. Then you'd go to the front and again you'll see your outer bearing race already pre-installed in there.

Take your outer bearing, which is part number L44649. That would drop right in there. With that in there, then you'd slide that on. Your spindle would stick through. You'd put your washer and nut on, tighten it down correctly, and then you'd just tap in your grease cap and again I mention that's an easy lube grease cap, and just to show you what I was talking about, as you can see, there's this rubber plug that you can just pull out and with it installed, it will give you full access to that grease Zerk fitting on an easy lube spindle. It also comes with the five 1/2 lug nuts right here. The lug nuts are used. Once everything is installed and you're going to put your wheels and tires back on. Then you'll go ahead and tighten those down by using these 1/2-inch lug nuts and torque them to the correct torque specs. That should do it for the review on part number 845476UC3-EZ, the Dexter trailer hub and drum assembly, the 3500 pound easy lube axles with the 5 on 3/4-inch bolt pattern. .


Customer Reviews

Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-3/4 - 845476UC3-EZ

Average Customer Rating:  4.6 out of 5 stars   (5 Customer Reviews)

This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

- 845476UC3-EZ
by:

Best deal in town, for sure. Very complete kits, arrived in a timely manner, and exactly as represented. If I had to add anything, I'd say include an axle nut, washer, and cotter pin. Still the best value ever, hands down! 895457



- 845476UC3-EZ
by:

Fit like a glove. No problems what so ever. If all of my issues were resolved as fast and nice as you did there would be no reason for any complaints. I made a mistake in measuring the stud spacing. I contacted you and explained what I had done, no problem I was told. I returned everything and was immediately handed the correct parts. Great company - Great people. 405039



- 845476UC3-EZ
by:

Everything worked but I was a little disappointed with the shipping. Everything was shipped in the same box and the weight of the hub partially crushed a bearing and the end caps. I had to bend them back with pliers. No permanent damage luckily, was just overall frustrating. 224463



- 845476UC3-EZ
by:

Product was all it was expected to be. Product bolted right on.....And I even went to the videos to make sure I had things right...will only order from e trailer any time I need something 210550



- 845476UC3-EZ
by:

Right priced and fast shipping! Shipping was upgraded at no cost, received everything a lot faster than expected. 135406


5
5

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Will Dexter Trailer Hub and Drum # 845476UC3-EZ Work with Electric Brakes
    Yes, the Dexter Trailer Hub and Drum Assembly # 845476UC3-EZ referenced in your question is compatible with both electric and hydraulic brake assemblies. This 3,500 pound hub works with 10 inch electric brake assemblies like the Dexter # 23-27 for the Right Hand and # 23-26 for the Left Hand. I have attached a short video demonstration on this hub and drum that you can also check out.
    view full answer...
  • Replacement 3,500 Pound Hubs and Trailer Axle with 94" Hub Length
    I'm sorry to hear about your recent mishap! I'm not sure which of the two axles and hubs on your trailer are in need of replacement but we have exactly what you need for either! To start, for the axle itself the Dexter Trailer Axle Beam # 7359765 will work perfectly. This axle features a 95" hub face length and a 80" spring center length, matching the existing axles on your trailer really well. The extra inch on the hub length won't cause any issues. Then for replacement idler hubs...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Dan D
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Hannah L
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.