1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 4 on 4 Inch
  4. For 2000 lbs Axles
  5. Hub
  6. EZ Lube
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings

Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings

Item # 8-91-05UC1-EZ
lowest price pledge
Our Price: $37.51
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
Quantity: 
In Stock
8-91-05UC1-EZ - For 2000 lbs Axles Dexter Axle Hub
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Hub is designed for use on trailer idler axles. Fits 2,000-lb E-Z Lube axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings part number 8-91-05UC1-EZ can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (29)
  • Q & A (44)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 8-91-05UC1-EZ

  • 4 on 4 Inch
  • For 2000 lbs Axles
  • Hub
  • EZ Lube
  • 8 Inch Wheel
  • 10 Inch Wheel
  • 12 Inch Wheel
  • Dexter Axle
  • L44649
  • L44649

Hub is designed for use on trailer idler axles. Fits 2,000-lb E-Z Lube axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Hub and drum are made in the USA


Specs:

  • Application: 2,000-lb E-Z Lube trailer axles with BTR spindles
  • Wheel size: 8" to 12"
  • Hub flange diameter: 5-1/2"
  • Bolt pattern: 4 on 4"
  • Grease cap flange diameter: 1.986"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,000 lbs


Exploded View

Note: Some axles rated at 2,000 lbs require a different seal and bearings. Be sure that the bearings in the hub being replaced have L44649 stamped on them. If the bearings have L44643 stamped on them, use #34822BX trailer hub.


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"

E-Z Lube-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


008-091-93 Dexter Trailer Idler Hub Assembly for 2K Axle with Hardware - 4 on 4 - L44649 Bearings - EZ Lube

Replaces 8-91-05UC1-EZ






Customer Reviews

Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings - 8-91-05UC1-EZ

Average Customer Rating:  5.0 out of 5 stars   (29 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 2,000-lb E-Z Lube axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

- 8-91-05UC1-EZ
by:

I ordered hub and bearing parts for my trailer not knowing what I was doing. They got everything by my description. I ran into a problem getting the old parts off so it's not yet complete. Etrailer did it again and i got it fast. Thank you Etrailer for the great service. 699142



- 8-91-05UC1-EZ
by:

Great products, Awesome service!! Fast, prompt order processing and delivery. Keep up the good work etrailer staff!!!! 672398



- 8-91-05UC1-EZ
by:

Excellent product. Perfect fit and the rubber grommets Make for easy greasing! Would recommend and buy from E trailer again. 644359



- 8-91-05UC1-EZ
by:

Rebuilding my boat trailer. So far have purchased a Dexter axle and hubs, and new springs from E-Trailer. Everything has exceeded my expectations. I am very happy with their products and would recommend their products to my friends. 583095


Comments
Rolling along. No problems at all. Very happy.
John J - 11/16/2019

63372

- 8-91-05UC1-EZ
by:

the wheel hub and springs were easy to install and everything was a perfect match and works perfectly. 506165



- 8-91-05UC1-EZ
by:

I was very satisfied with the delivery of the product it was delivered on time and a timely manner the product is of Great Value and just as it was advertised at a great price I'm very satisfied with the whole transaction 480868



- 8-91-05UC1-EZ
by:

I was completely impressed with all the customer service I received. I don't recall ever having the hard work you folks did. I will make future orders with you..But one thing..the caps that go on the hub we're a nightmare...not sure what the deal was but I finally got them on. But more important..thank you very much for customer service. 446118



- 8-91-05UC1-EZ
by:

Upgraded my axle on 1973 Elgin trailer. The old axle used 2.75 shorty hubs that are hard to locate bearings and seals for. Once i installed the new axle, the Hubs from Etrailer fit like a glove right out of the box. No frustration and no worries. Something that could be said of the old set up. Time to go Fishing. 444272



- 8-91-05UC1-EZ
by:

Ordered by phone Julie H. Very helpful! 431702



- 8-91-05UC1-EZ
by:

Brand new to camping, a little nervous for a first time long trip. Found the hub assembly at a very good price and bought it for just-in-case. A very good take along investment and takes almost no space. Quality and completeness just like the original. 428024


Comments
Still havent needed my insurance it is money well spent
Tony - 09/02/2018

43126

- 8-91-05UC1-EZ
by:

we received our part in a timely fashion just as promised thanks 354960



- 8-91-05UC1-EZ
by:

Good product, works great! 348380



- 8-91-05UC1-EZ
by:

The hub assembly worked out great, the fast delivery saved my vacation at that time! The bearing kit I have not used yet, I purchased as a spare.. Not sure what else you offer. forward your web site info.. 329076



- 8-91-05UC1-EZ
by:

Exactly as expected and received timely 295402



- 8-91-05UC1-EZ
by:

good product; quick order processing and delivery. 274619



- 8-91-05UC1-EZ
by:

The producthing is excellent quality. Didnot install it. I am carrying it as a spare 269405



- 8-91-05UC1-EZ
by:

Everything still runs great after one year. No seizes no wobble. Good product! 268191



- 8-91-05UC1-EZ
by:

Parts were perfect, no issues putting together! Thank you George J for your help! 254395



- 8-91-05UC1-EZ
by:

Excellent service part just as described very fast shipping and great customer service I would highly recommend them 215240



- 8-91-05UC1-EZ
by:

Haven't really tested them out yet but the look good fit right and wow did they get them here fast! Great place to do business I'd say. Gary 212815



- 8-91-05UC1-EZ
by:

The replacement bearings from Pep Boys cost as much as the new hub kit from E Trailer! Now my old boat trailer is as reliable as a new trailer. No worries towing my boat to Vermont from NJ. Great product, Thanks !!! 158096



- 8-91-05UC1-EZ
by:

Excellent and easy to install. 125250



- 8-91-05UC1-EZ
by:

Works as expected, efficient 123514



- 8-91-05UC1-EZ
by:

What a great experience. I wish all my online purchases went this well. You sure know how to do customer service right. Easy website, great fit, great price & rush shipping at no extra charge. I don't know how it could have been any easier. I'll definitely be back! 104429


Comments
I couldnt be happier. The trailer is not something you should have to worry about...it should just follow the van down the road. With the replacement of the hubs, it does so without giving it a second thought. Peace of mind is a wonderful thing!
Bob O - 10/20/2014

7330

- 8-91-05UC1-EZ
by:

great price, great product delivered fast. I could not find these parts in my area in stock anywhere. parts places here were happy to order the parts for me at 3X the cost of etrailer 84995


Comments
I am happy to tell you I have not needed to use the hub. I purchased it as a spare for a camping trailer I own. I keep the hub in the trailer in case I have a problem on a trip. It is good quality, I hope to not need it, but I am happy I have it.
Anthony G - 06/27/2014

5119
25
29
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • How to Pick Out a Replacement Trailer Hub
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub...
    view full answer...
  • Replacement Hubs with L44649 Bearings and Replacement Hubs with L44643 Bearings
    If the spindle is 1 inch in diameter exactly at both bearing locations then they are L44643 bearings. If it is slightly over 1 inch then they are L44649 bearings. You can also measure the inner diameter of the bearing and that will help. And if you can email me a picture I might be able to make it out. I have seen a lot of bearings over the years! If you do end up having L44649 bearings AND the spindles have grease fittings on the ends then you can use hub # 8-91-05UC1-EZ. If they are...
    view full answer...
  • What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup Trailer
    We have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle. This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub. If you do not have grease zerks at the end your axle spindles,...
    view full answer...
  • Availability of 4-on-4 Idler Hub for 1-Inch Spindle
    We offer Axle Tek Hub # AKIHUB-440-2-1K which uses inner and outer bearing # L44643. This bearing's inner diameter is 1.000-inches and it fits a BT8 spindle like # R104BT8 which has 0.99-inch bearing surfaces. The hub kit includes bearings, races, seal, grease cap, wheel bolts and lug nuts as shown in the linked review video.
    view full answer...
  • Recommended Bearing Kit For 2,000 Lb Boat Trailer Axle
    The bearing kit you need for your trailer is part # BK1-100. This will include L44643 inner and outer bearings, and the seal with a 1.249 inside diameter. The kit also includes the races and a cotter pin. If you are replacing both sides of the trailer you will need 2 of these kits to complete the job. I have attached a helpful article that explains how to replace the hub kits you can check out.
    view full answer...
  • Trailer Hub Compatible with Caliper Measurement for Camping Trailer Axle
    Based on your photo it does appear you have the BTR spindle that takes the 1.063 inch inner bearings. The fact that it isn't a digital caliper with the precision of that thousandth does leave slight ambiguity but I am still confident you will want the Dexter Trailer Idler Hub Assembly # 8-91-05UC1. You will not need the # 8-91-05UC1-EZ you asked about because you don't have the grease zerk in your spindles. To confirm fit, I recommend putting your caliper on the grease seal location...
    view full answer...
  • 2,000 lb Trailer Hub with 4 on 4 inch Bolt Pattern Not Pre-Greased
    For a version of the hub you mentioned that not is pre-greased we have the # AKIHUB-440-2-G-EZ-1K.
    view full answer...
  • How Far Does Grease Seal Install into Dexter Trailer Hub
    When installing trailer hub grease seals you want to install them flush with the surface of the hub.
    view full answer...
  • Measuring Harbor Freight Trailer Spindle to Determine if there are Replacement Hubs or Bearings
    So the bearings that were included with the trailer kit are too small to fit on the spindle? It sounds like they gave you the wrong hubs or bearings and you would need to take it all back or contact the manufacturer for the correct ones. In order to determine if we have anything that will fit I would need to know the spindle measurements. I have included a picture that shows where to measure. The measurements should be taken using dial or digital calipers.
    view full answer...
  • Replacement Hubs for 2000 Dutchman Voyager Pop-Up Camper
    To select proper new hubs for your trailer you will need to confirm a few things: bolt pattern (see linked article), inner and outer bearing numbers (see linked photo) and axle weight rating (which should be indicated on a sticker or plate on the axle). You can then use the link provided to see our main page for hubs. Filters in the left margin will allow you to narrow the results based on your bearings, bolt pattern, wheel size and weight requirement, as well as whether or not you need...
    view full answer...
  • Replacement Hubs for Harbor Freight Haulmaster # 90154 Trailer
    To determine if we have a wheel bearing that will be compatible, you will need to use a digital caliper and take some measurements of your existing spindles. If you reply with the B, C and D dimensions you find (as shown in the diagram I provided), I would be happy to try to find hubs that would be compatible with your bearings. In the past we have determined that the bearings of your trailer have non-standard numbers stamped on them. Normally with just the bearing number we can determine...
    view full answer...
  • Replacement Hubs and Related Parts for Older Snowmobile Trailer
    Replacement hubs (and bearings, races, seals, etc) for your "new" trailer can be selected easily by just confirming a few details from the trailer. First you need to find the sticker or plate on the axle that indicates the axle weight capacity. Then you need to pull the old bearings, inner and outer, to find their part numbers to let you select correct replacement bearings, races, seals and the hubs that work with those parts. Last, you need to match the wheel bolt pattern to ensure...
    view full answer...
  • Recommended Bearing Buddies To Fit Hubs
    The Trailer Hub Assembly - 2,000-lb Axles - 4 on 4 - L44649 Bearings - E-Z Lube # 8-91-05UC1-EZ has a 1.986 inch bore where the grease cap fits. If you choose to use a Bearing Buddy, you would need to remove the grease zerk from the EZ lube spindle as the two are not compatible. The proper Bearing Buddy For these hubs are the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS. The grease capacity is not something that is monitored....
    view full answer...
  • Choosing Replacement Spindles for 4-on-4-Inch Wheels on Light Duty Cart
    Spindles need to be selected based on the set of bearings used in the hubs that will be installed on them. For example, the hub you referenced, 4-on-4-inch # 8-91-05UC1-EZ from Dexter, uses part # L44649 for its inner and outer bearing. If your current hub uses these bearings you can use EZ Lube Spindle # R104BTREZ. We also offer a bearing/race/seal kit for this spindle, part # BK1-150, that uses this same bearing set. The linked photo shows you the typical appearance and location of...
    view full answer...
  • What is the Overall Length of Trailer 2k Hub Assembly 8-91-05UC1-EZ
    I went out to the warehouse to measure trailer hub # 8-91-05UC1-EZ for you. The overall length is 4-3/16 inches.
    view full answer...
  • How to Ensure New Hubs Will Fit on Existing Jayco Pop-Up Trailer Spindles
    An alternate hub can be installed on a spindle so long as the new one uses the same inner and outer bearing as the original. This is the way to ensure the new hubs fit properly on your spindles. Idler hub # 8-91-05UC1-EZ that you referenced has a 4-on-4 wheel bolt pattern and uses bearing # L44649 as both its inner and outer bearing. If your existing hubs use these same bearings then the hub will fit your spindle. Make sure your existing hubs use this same 4-on-4 wheel bolt pattern to...
    view full answer...
  • What is the Overall Diameter of the Hub Assembly on Dexter Trailer Hub Assembly # 8-91-05UC1-EZ
    I went out to the warehouse and took a measurement of the whole hub assembly on the Dexter EZ Lube Trailer Hub Assembly, part # 8-91-05UC1-EZ. The overall diameter of the whole hub assembly is 5.45 inches. I included a picture with the measurement listed.
    view full answer...
  • Replacement Trailer Grease Seal for Hub that has Inner and Outer Bearings L44649
    Based on the bearings you listed having you have a trailer hub like part # 8-91-05UC1-EZ which would take a grease seal of # 10-9
    view full answer...
  • Trailer Wheel for a Rear Rack on a 5th Wheel Trailer
    We have many different single wheel hubs, see link. To determine the trailer hub assembly for your rear rack on the fifth wheel, we will need to know what spindle is on the rack. The best way to make this determination is to remove the existing hub on the rack and acquire the part numbers off of the bearings and seal. You will also need to determine the bolt pattern of the original hub, or select a new wheel and tire combination that will work with the hub you choose. I posted a photo...
    view full answer...
  • Needing Dexter Hub # 8-91A
    The hub that you are looking for comes in the Trailer Hub Assembly # 8-91-05UC1 on our site. For the E-Z Lube version you would instead want the Trailer Hub Assembly # 8-91-05UC1-EZ. I contacted Dexter Axle and confirmed that these were the correct hubs for the 8-91A hub you are looking to purchase.
    view full answer...
  • Using the Timbren Axle-Less Systems To Upgrade From Single Axle to Tandem Axle on 4,000 Lb Trailer
    The Timbren Axle-Less Trailer Suspension Systems are excellent options for many reasons with one being that is makes for upgrading from a single to tandem axle setup much easier in regards to both installation difficulty and parts needed. In order to choose the correct system, you'd need a total capacity that meets the total weight of the trailer minus the tongue. The Timbren Axle-Less Trailer Suspension Systems part # ASR2000S01 which has a 2,000 lbs weight capacity would have you covered...
    view full answer...
  • Idler Hub that Fits Timbren Axle Less kit part # ASR2000S02
    For an idler hub that fits the Timbren kit part # ASR2000S02 you would want the part # 8-91-05UC1-EZ which comes with the needed bearings.
    view full answer...
  • Dexter Torflex #9 1000-2200 lbs Axle Hub and Bearing Kit Replacements
    The current hub for your Torflex #9 axle uses the inner and outer bearings # L44649 with a grease seal that has a 1.500" inner diameter. You can find the bearing kit as part # BK1-150 on our site. For a replacement hub we have the part # 8-91-05UC1 for a standard spindle or part # 8-91-05UC1-EZ for E-Z Lube spindles. If you have brakes then you would want part # 8-173-16UC3 for a standard spindle or part # 8-173-16UC3-EZ for E-Z Lube spindles. All of these hub kits come with bearings...
    view full answer...
  • Hubs and Spindles to Go with 5.70-8 Trailer Tire and Wheel Combo with 4 on 4 Bolt Pattern
    Since you need tires and wheels, hubs, and spindles the best solution is to go with a complete axle with 4 on 4 hubs to match tire and wheel combo # AM30080. Spindles are difficult to install because they require a special jig and someone with experience to weld them on. With a complete axle, its all ready to go. I have included a link to the axles we have with 4 on 4 hubs for you. Otherwise you could use hub # 8-91-05UC1-EZ with spindle # R104BTREZ and everything will be compatible...
    view full answer...
  • Dimensions of Timbren Axle-Less Trailer Suspension System # ASR400S01
    The Timbren Axle-Less Trailer Suspension System - Spindle Only - Off-Road Tires - 400 lbs # ASR400S01 is a great system. We do not have an stp file or usable 3D model, but I have attached the dimensions for the unit to assist. I've attached the manufacturers installation instructions as well as the weights and dimensions to assist as well for you to compare models. I recommend the Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings # 8-91-05UC1-EZ...
    view full answer...
  • Replacement Trailer Wheel for Trailer with 1.062-Inch Diameter Spindle
    Selecting a replacement or spare trailer wheel/tire requires matching the wheel bolt pattern, weight rating, tire size and tire weight load range. If what you're looking for is a wheel with a fixed hub/bearing, like the ones often used on wheel barrows, we do not have that type but many farm-type stores have these. If your trailer uses a straight spindle like # R104BTREZ, which has a 1.06-inch diameter where the bearings ride, then we do have idler hub kits. Part # 8-91-05UC1-EZ is...
    view full answer...
  • Using Timbren Axle-Less Suspension to Build a Trailer for On and Off-Road Use
    If you consider that a Timbren axle-less suspension system such as # ASR1200S01 has just one moving part compared to leaf spring suspension that has multiple pivot points and the advantage, at least from that standpoint, is clear. Fewer moving parts means fewer potential issues. Only the lower jaw part will pivot on that large bolt and while it doesn't have a grease fitting it would be easy to lubricate it since the units can be taken apart relatively easily. That would help protect...
    view full answer...
  • Can Timbren Axle-Less Suspension System Fit on a Single Axle Trailer to make a Tandem Axle Trailer
    You can add the Timbren Axle-Less Suspension System, # ASR1200S01, to your trailer in combination with your current axle, but there are a few factors that you will want to consider first. To add this system to your trailer, you will need to move your current axle either forward or backward to ensure that the weight of the trailer and any load is distributed to both axles properly. I have attached a diagram that explains how to find the correct axle spacing for a tandem axle trailer...
    view full answer...
  • Recommended Axle-Less Suspension System For Lightweight Off-Road Trailer
    Since you want to travel off-road I recommend the Timbren Axle-Less System, part # ASR1200S01. This is designed for off-road tires and has a capacity of 1,200-lbs. The hub assembly I recommend is part # 8-91-05UC1-EZ. This system does not have the same bolt pattern as your Tacoma. This hub has a 4 on 4 wheel bolt pattern. Since you said you want to match the 6 x 5-1/2 bolt pattern of your Tacoma you will need to use a more heavy-duty system like part # ASR35HDS01. This is a 3,500-lb...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Patrick B
Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.