Dexter Trailer Idler Hub Assembly for 8,000-lb Axles - 8 on 6-1/2 - Oil Bath

Dexter Trailer Idler Hub Assembly for 8,000-lb Axles - 8 on 6-1/2 - Oil Bath

Item # 8-287-14UC1

lowest price pledge

Retail:$313.48

Our Price: $176.82

You Save: $136.66
Trailer Hubs and Drums

This item qualifies for Free Shipping

Shipping Weight: 21 lbs

Quantity: 
In Stock, Ships Today
8-287-14UC1 - 25580 Dexter Axle Trailer Hubs and Drums
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • 8 on 6-1/2 Inch
  • For 8000 lbs Axles
  • Hub
  • Standard
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • 25580
  • Dexter Axle
  • 02475
Hub is designed for use on trailer idler axles. Fits 8,000-lb axles. Inner bearing (25580) and race, outer bearing (02475) and race, oil seal, cap, wheel bolts, and lug nuts included. Oil bath system allows for easy maintenance. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Idler Hub Assembly for 8,000-lb Axles - 8 on 6-1/2 - Oil Bath part number 8-287-14UC1 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (1)
  • Q & A (4)
  • Videos (1)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 8-287-14UC1

Hub is designed for use on trailer idler axles. Fits 8,000-lb axles. Inner bearing (25580) and race, outer bearing (02475) and race, oil seal, cap, wheel bolts, and lug nuts included. Oil bath system allows for easy maintenance.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, oil cap, wheel bolts, and lug nuts are included
  • Oil bath lets you check lubricant level without disassembling the hub
    • Look through clear oil cap to check lubrication
  • Oil runs cooler than grease, even in heavy-duty applications
  • Sturdy iron construction
  • Hub and drum are made in the USA


Specs:

  • Application: 8,000-lb trailer axles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 17-1/2" to 18-1/2"
  • Bolt pattern: 8 on 6-1/2"
  • Weight capacity: 4,000 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 02475 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 02420
  • Oil seal (included): 10-63
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


008-287-92 Dexter Trailer Idler Hub Assembly for 8K Axle with Hardware - 8 on 6-1/2 - Oil Bath

Replaces 8-287-14UC1







Video of Dexter Trailer Idler Hub Assembly for 8,000-lb Axles - 8 on 6-1/2 - Oil Bath


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Trailer Hubs and Drums - Hub - 8-287-14UC1 Review

Speaker 1: Today we're going to take a look at the Dexter Oil Bath Trailer Idler Hub Assembly for 8,000 pound axles. Has a eight on six and a half inch bolt pattern. Now this trailer hub assembly will fit 8,000 pound idler axles, with 9/16ths diameter studs. It includes everything laid out here on the table, the idler hub assembly. The inner bearing, which is part number 25580. Outer bearing, which is part number 02475.

The bearing races are included, they're pre-installed already into the hub. Comes with the unitized oil seal, part number 10-63. The oil cap, which is part number RG04-230 and then eight of the 9/16th lug nuts.Now this hub is an oil bath design, so it'll let you check your lubricant level without disassembling the hub. You can look through the clear oil cap to check the lubrication. And oil runs cooler than grease, even in heavy duty applications.

It is a sturdy iron construction. Specs again on this, the application is 8,000 pound trailer axles and it is compatible with standard axles for most manufacturers, including Dexter, Lippert, and Alco.Wheel size used on this is 60 inches or larger. Bolt pattern we mentioned is eight on six and a half inches, and the weight capacity on this hub assembly is 4,000 pound, so when it's used with one on the other side of the axle, it'll meet your 8,000 pound axle capacity.But that should do it for the review on the Dexter Oil Bath Trailer Idler Hub Assembly for 8,000 pound axles, with the eight on six and a half inch bolt pattern.


Customer Reviews

Dexter Trailer Idler Hub Assembly for 8,000-lb Axles - 8 on 6-1/2 - Oil Bath - 8-287-14UC1

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 8,000-lb axles. Inner bearing (25580) and race, outer bearing (02475) and race, oil seal, cap, wheel bolts, and lug nuts included. Oil bath system allows for easy maintenance.

- 8-287-14UC1
by:

Item was quickly shipped and delivered Very reasonable priced 609262


1
1

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

Do you have a question about this Trailer Hubs and Drum?



Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Photos by:
Jim W
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.