1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 5 on 4-1/2 Inch
  4. For 2000 lbs Axles
  5. Hub
  6. Standard
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2

Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2

Item # 8-258-5UC1
lowest price pledge
Retail:$100.72
Our Price: $84.34
You Save: 16%
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 7 lbs
Quantity: 
In Stock
Dexter Axle Trailer Hubs and Drums - 8-258-5UC1
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Hub is designed for use on trailer idler axles. Fits 2,200-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. For 13" to 15" wheels. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 part number 8-258-5UC1 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (66)
  • Q & A (135)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 8-258-5UC1

  • 5 on 4-1/2 Inch
  • For 2000 lbs Axles
  • Hub
  • Standard
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Dexter Axle
  • L44649
  • L44649
  • 1/2 Inch Stud

Hub is designed for use on trailer idler axles. Fits 2,200-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. For 13" to 15" wheels.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
  • Sturdy iron construction
  • Hub and drum are made in the USA


Specs:

  • Application: 2,200-lb trailer axles with BTR spindles
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,100 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-258-91 Dexter Trailer Idler Hub Assembly for 13" to 15" Wheels - 2.2K Axles - 5 on 4-1/2 - L44649 Bearings

Replaces 8-258-5UC1






Customer Reviews

Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - 8-258-5UC1

Average Customer Rating:  4.6 out of 5 stars   (66 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 2,200-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. For 13" to 15" wheels.

- 8-258-5UC1
by:

In building two tear drop trailers (see attached picture) and do to a miss measurement I ended up with two axles without hubs. (another story!) So I decided to order hub and start making a utility trailer. I enjoy etrailer's website. It is very helpful in selecting the right trailer parts. Delivery was good but the packaging was poor. The bearing, seal, lug nuts and cap are all in one bag taped to the heavy hub. One of the seal were bent but the rubber part looked OK, so I straighten it the best I could and install it anyway. I did not want to go through the hassle of returning it for a new one.


Comments
Still have not built the utility trailer. Other project have taken priority.
Gary - 03/26/2018



- 8-258-5UC1
by:

I noticed both my hubs had cracks and someone before me did too, see photo w/ yellow mark at crack, I almost ordered just the bearing kit. The hubs arrived together and all the parts where heavily taped to hub securing them well so no damage occurred. Madison at eTrailer.com was a great help in finding the right parts I needed. Installation was easy as the races were already mounted in the hub. The price was affordable and when i mounted the hub/tire i almost thought i heard the boat trailer sigh with relief.



- 8-258-5UC1
by:

I can not say enough about the efficiency of this company. I have ordered two products ( trailer tires and idler hub for utility trailer) within one week. Both times, I paid for 2-day delivery. On both occasions my orders were filled promptly and I received them as promised, two days. Keep up the good work-I’ll always be your customer.



- 8-258-5UC1
by:

The products ordered were exactly what I needed. After having to replace bearings on the side of the road a few times over the years, I finally decided to buy a spare hub, which I feel will cut the roadside maintenance time dramatically, should I have a seal or bearing failure. (It happens.) The packaging could have been better. I also had 5 pairs of seals ordered with the hub, as the ones that came with it did not fit my axel. (Always read the notes on the products thoroughly. Glad I did.) One of the seals was damaged beyond use (crushed by the hub) during shippment. While the parts were packed with packing-paper, I'm not sure that would suffice with some of today's parcel carriers. You know, the ones that run up to your porch and throw the box as they turn to run back to their trucks. Anyway, completely happy with the ordering process, shipping time, delivery time, and most importantly, the email communication from E-Trailer. I've purchased from E-Trailer before and will definately be back for future needs.


Comments
Thankfully I havent had to use the hub yet. I bought it as a spare, as changing a hub instead of changing seals on the side of the road may be a lifesaver. Thanks for the email follow up. I will be back to shop. Oh, my neighbor just bought a boat and I gave him your website link, with a strong recommendation.
Paul G - 06/17/2016



- 8-258-5UC1
by:

There were no part numbers on my utility trailer's bearings and the part numbers on the hubs were not matching anything I could find online. I called eTrailer and spoke with Ashley. She did a great job at mapping over exactly what new part numbers I needed and had them shipped out; she was super helpful and patient. Everything fits and is working perfectly with my new ST175/80/D13 wheels and tires on my 5x8 2000 Eagle Utility Trailer. Prices are good and service was excellent. If eTrailer should improve on anything it should be the packaging. One of the new hub dust covers was bent/dented but still usable. Still worth a 5 star rating!


Comments
Ive been towing that little trailer around for over a year and the parts I ordered are holding up just perfect. Thanks again!
Brad - 05/09/2017



- 8-258-5UC1
by:

These hubs were a good replacement for my old tired boat trailer. Be sure to measure everything on your old hubs. This kit didn't have the right seal for my axle but with so many different sizes out there measure to be certain. I had some seals from a previous job sitting on the shelf so I just used those. The kit didn't have cotter pins so make sure you have them as well. Overall a good product.



- 8-258-5UC1
by:

I ordered two new Dexter 8-258 hubs, they were easy to install and worked as advertised. The team at etrailer.com were professional and very helpful.


Comments
good product, perfect fit, easy to install and is still working well on an often used trailer.
Frank C - 08/30/2018



- 8-258-5UC1
by:

I received this in a timely manner. The grease cap was damaged in shipping, but etrailer sent me a replacement without issue. A smaller box would have prevented the hub assembly from rolling around. I appreciate the videos by etrailer explaining the two different sized hubs in this class. That helped me make sure I was ordering the correct part for my axle.



- 8-258-5UC1
by:

Acceptable quality, fit my trailer just fine, easier than trying to get the original bearing races out of my old rusty hub. Comes with the bearings, seal, and lug nuts, but no cotter pin. Seems like that would be obvious and it could cause an unexpected trip to the hardware store if you don't have some available.



- 8-258-5UC1
by:

The service that I received while ordering was fine. However, I had poor results as one of the hubs/tire flew off of the axle at 60mph on our first camping trip. Not sure if it was the part or installation error, but everyone was ok. After towing to dealer and repairs, they said the axle was fine, but both hubs/tires needed to be replaced. We have gone on a couple trips this summer, with no more difficulties. DIY is not always the best option. Safe travels everyone!



- 8-258-5UC1
by:

Hubs are in nice shape, I like the fact that they dont come greased as I would have no clue what grease was used in them. Please take note however if you are replacing marine hubs like I was that you will need to order two seperate double lip seals. I actually had to order a second time because I noticed that I couldnt hold any hub pressure on my ezlube hubs. Note that I knew from the get go that I needed different caps. I would like to see this same hub offered in a marine package or a warning that this is only a single lip seal. Its however not a deal breaker, I will order a third knowing what I know now to have a travel backup.



- 8-258-5UC1
by:

Sent two different seals both of which were the wrong size. One of the seals was too dented to use even if it had been the correct size. One set of bearings was the wrong size. Packaging was very unprofessional with the bearings, seals, lug nuts, and dust caps taped to the hub with packaging tape. Package did arrive on time but could not be used. Customer service was good and we are awaiting a refund.



- 8-258-5UC1
by:

etrailer has never disappointed me on selection, price, and shipping. I have been a long time customer! Great job!!



- 8-258-5UC1
by:

Great product, great price. This is a duplicate of what was originally on my boat trailer. I check prices when I go to buy replacement parts, trying to replace with the same brand name as the original. Been burnt by too many aftermarket items that "almost work the same." Local retailers wanted $100 for this, not to mention the sales tax. Some online retailers wanted $82.00+ for this same product. Etrailer came through for me.



- 8-258-5UC1
by:

Put many miles on these at highway speeds hauling dirtbikes and quads. After one year no issues to report. Have not regreased yet so nothing to report on bearing condition but they are still tight, not getting hot, and spin with little resistance. Good buy.



- 8-258-5UC1
by:

Very happy with the hub and bearings kit. E trailer got me the write parts despite me picking out the wrong bearings. Very accurate service



- 8-258-5UC1
by:

I would give his item 5 stars, except I couldn't get the grease covers to fit the hubs. I had to use the old covers. Other than that, the kit was very easy to install and came with everything I needed except a Cotter pin, washer and nut. I used my old washer and nut and a new Cotter pin. Customer service was very helpful and the shipping was super quick!



- 8-258-5UC1
by:

Project completed and am back to fishing. Although one bearing was missing in shi3 that was quicky solved and everything is great now. Thanks for your quick shipping of parts.



- 8-258-5UC1
by:

Hub fit good and repaired my trailer. Pulled trailer 3 hours one way on first trip with no issues at all.


Comments
Still working great
Ronald C - 08/12/2017



- 8-258-5UC1
by:

Price was reasonable and they fit and perform well. I used these to upgrade an oddball 5 on 4.25 bolt pattern 2000lb axle to the more common 5 on 4.5 pattern. The hubs essentially paid for themselves in the decreased cost of replacement tires and wheels (would have to have had tires mounted/balanced locally which greatly increased the price).



- 8-258-5UC1
by:



- 8-258-5UC1
by:

Extremely unsatisfactory result with a complaint on phone. will never use your company again nor will I recommend same.



- 8-258-5UC1
by:

The shipping was fast! The hub package is nice but the paint job is not the best. The packing of the hub package could have been better, the bag that was taped to the hub pulled the paint. I stripped the paint and reapplied paint in short order! Wish the package that contained the bearings, nuts, grease cap and seal was better protected because both grease caps were damaged at the lip and unusable. This damage is not a concern for my project because I am using bearing buddies. I will be back because of the great service and good price! Thanks



- 8-258-5UC1
by:

I've had no issues with the hub or bearings I installed on my trailer. *knocks on wood* Hope it continues that way for years to come...



- 8-258-5UC1
by:

worker well very pleased


26
67
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Replacement Hub for 1989 Ranger Trailer
    Judging by your photo, your trailer would use an idler hub, not a hub drum. Assuming you have 5 lug on 4-1/2 inch bolt circle wheels that use an # L44649 inner and outer wheel bearing, you have a few choices. Rather than the painted hub, I'd recommend going with a galvanized hub for greater corrosion resistance. Dexter hubs are manufactured in the US, which is what I'd recommend. For an 8, 10 or a 12 inch wheel, use # 8-259-50UC1 for a standard spindle or # 8-259-50UC1-EZ for the EZ...
    view full answer...
    Image 1 for
  • Replacement Bearings, Races and Oil Seals for Ranger Tandem Axle Boat Trailer with Cool Oil Hubs
    To determine the correct replacement bearings, races and seals for the oil bath cool hubs on your Ranger Boat Trailer you will want to remove one of the hub assemblies so that you can take note of the part numbers on the existing components. If you refer to the photo I linked you'll see how these parts numbers usually appear. Experience with Ranger trailers like yours suggests that it may well use inner bearing # L68149, outer bearing # L44649, inner race # L68111 and outer race # L44610....
    view full answer...
    Image 1 for
  • Replacement Hub that Has Bearings L44649 and Bolt Pattern 5 on 4-1/2 inch
    The trailer hub part # 8-258-5UC1 that you referenced is an exact fit for the spindle you have on your trailer based on the bearing numbers you listed and the wheel bolt pattern. To jump up to a 3,500 lb axle would require more info from you. I'd need spring seat center to spring seat center plus hub face to hub face off your old axles. You have slipper springs which we can help with that as well. How long are the springs you have now?
    view full answer...
    Image 1 for
  • Solution for 2,200 lb Axle with Short Spindles to Replace Hubs with 5 Lug Bolt Pattern
    You have the stub length spindles which we don't have replacement hubs for. If you removed the spindle and installed the part # TRU27FR in it's place you'd have ability to install new hubs like what you are looking for with # 8-258-5UC1 that you referenced.
    view full answer...
  • Replacement Axle for Trailer with 46-1/2 Inch Spring Center
    Unfortunately, we do not have any trailer hubs with the bearings that you need. Would you be open to replacing the entire axle? This would be the only option we have for you. If so then I would need you to measure the distance between each hub face and the spring center. I would also need to know the capacity and if it is a leaf spring or torsion system.
    view full answer...
  • Availability of Hub that Uses LM67045 1.25 Inch Inner and Outer Bearing
    I do have an option for you, however, we don't carry any hubs that use bearing number LM67045 for both the inner and outer bearings, or any hubs that use # 02475, # 14125A, # 15123 or # LM67048 (also 1.25 inch ID) for their inner and outer bearings. From what I was able to find, this type of hub was used on 2,500 lb axles on marine or utility trailers dating back to the 1960's for which replacement parts are nearly impossible to find today. Your best option is to replace your axle...
    view full answer...
    Image 1 for
  • Replacement Trailer Hub for 55-Year-Old Trailer
    You have an interesting combination of bearings on your trailer hub. We carry the # LM67048 bearing, but the other bearing we don't so it is unlikely that we will have a hub for your 55-year-old trailer. However, you can double check by measuring the spindle then using dial calipers since the measurements have to be as accurate as possible. Please refer to the picture I have included that shows where to measure the spindle. With those measurements we can try to determine the correct...
    view full answer...
    Image 1 for
  • How to Determine Correct Hub Assembly Based off Bearing Numbers and Spindle Dimensions
    You will need to disassemble your hub to get the actual bearing numbers. Unfortunately the numbers you gave me don't help identify anything. Check out the video I attached that details how to get the bearings out of a hub so that they can be identified. Once we have that info we can pick out the correct hub. The other option you have is to get exact measurements from spindle. Check out the picture I attached shows what dimensions are needed. I also will need to know the correct...
    view full answer...
    Image 1 for Image 2 for
  • How to Pick Out a Trailer Hub for a Utility Trailer
    The bearing numbers you listed aren't the standard trailer bearings we normally see, but there is still hope that we may have a hub that would work. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing...
    view full answer...
    Image 1 for
  • Information Needed to Find Correct Replacement Hub for Boat Trailer
    From what you describe, you might very well use the # 8-258-5UC1 hub you referenced, but we will need to be absolutely sure. In order to suggest the correct hub, we will need some additional information from you. - Bolt pattern of your existing hubs (see FAQ article to determine your bolt circle dimension) - Since your bearing reference numbers are unobtainable, you will need to take some accurate measurements from your spindle using a dial or digital caliper at the inner bearing surface,...
    view full answer...
    Image 1 for
  • Solution for Trailer Hub Replacement When Hub Uses Non Standard Bearings
    Your outer bearing, LM12749, is not a trailer bearing that we carry at this time. I checked online and found that the outer bearing you need will have a 0.8656 inch inside diameter for your spindle. Because of that we aren't going to be able to provide you with a solution that will fit your current axles. The spindle you have won't fit anything we have. The best solution I can provide would be to recommend to you with new axles on your trailer. You can order them with new hub/drums and...
    view full answer...
  • Finding Replacement Hubs for Older Trailer
    Identifying replacement hubs for your older trailer will require you to confirm a few details from your trailer: its axle weight rating, bolt pattern, and the existing bearing and seal numbers. If these cannot be found you will need to take precise measurements (to the nearest thousandth) using a digital caliper. The linked photo shows both the typical appearance and location of these part numbers. In the event you take measurements instead the spindle locations to be measured are also...
    view full answer...
    Image 1 for
  • How to Pick Out Replacement Hubs for a Boat Trailer
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub...
    view full answer...
    Image 1 for
  • Replacement Boat Trailer Hub for 1 Inch Diameter Straight Spindles
    Based on your description it sounds like the hubs on your trailer take L44643 bearings which have a 1 inch inner diameter. We have pre-greased hub # CE13110 that fits that description. I have linked a video review of it for you to check out.
    view full answer...
  • Replacement Trailer Hub with L44649 Inner and Outer Bearings and 5 on 4-1/2 Bolt Pattern
    You have already done the hard part, which is getting the bearing numbers. With those numbers and the bolt pattern you have provided, we have 2 possible hubs that could work as replacements, depending on the trailer wheel size. If your trailer has 12 inch to 15 inch wheels, then you can use the Trailer Hub Assembly, # 8-258-5UC1, that you have referenced. If your trailer has 8 to 10 inch wheels, you will need Trailer Hub Assembly # 8-259-5UC1.
    view full answer...
  • Trailer Hub Recommend for Utility Trailer with 5 on 5-1/2 inch Bolt Pattern L44649/L68149 Bearings
    The spindles of an EZ lube axle are the exact same as a non-EZ-lube. Only difference being the zerk fitting at the end of it. The EZ lube hubs we offer are the same as the non-EZ-lube hubs with the only difference being the grease cap has a rubber plug that fits the cap. For a replacement hub to replace yours with a 5 on 5-1/2 inch bolt pattern and matches your bearings of L44649/L68149 you would wan the part # AKHD-555-35-K for a non-EZ lube or part # AKHD-555-35-EZ-K for EZ-lube style.
    view full answer...
    Image 1 for
  • Grease Cap Recommendation for a Harbor Freight Trailer 90154
    The 2.09 grease cap that you tried might be the one to use. They are supposed to be a tight fit and require being tapped in with a hammer and a flat piece of wood like a 2x4. There is a Bearing Buddy that fits right between the two sizes you have tried though. The part # BB2047SS has an outer diameter of 2.047 inches.
    view full answer...
  • How to Identify Compatible Replacement Idler Hub
    The sure way to match up a replacement 4-on-4 idler hub to your spindle is to note the bearing and seal part numbers from the original hub. On the linked page you'll see all 4-on-4 idler hubs and all of these use one of two bearings for both their inner and outer bearings, either # L44643 or # L44649. We also offer complete axle/idler hub kits in both 60-inch and 72-inch hub face sizes and these complete axle kits like # 20440I-EZ-60 are shown on the linked page. This kit includes the...
    view full answer...
  • Replacement Trailer Hub Assembly with 1-1/4 Inch Inner Bearing and 1-1/8 Inch Outer Bearing
    The closest hub assembly we have available to the specs that you mentions is with a 3,500 pound hub like the etrailer.com # AKHD-655-35-EZ-K. This hub does have a 6 on 5-1/2 inch bolt pattern. It uses # L68149 for the inner bearing (1.378 inch inner diameter) and # L44649 for the outer bearing (1.063 inch inner diameter). Since the measurements need to be exact, I recommend verifying the measurements you took on your bearings with a digital caliper like # 301-17068 to see if this will work....
    view full answer...
    Image 1 for
  • Dexter 8-258 Inner Grease Seal Recommendation
    For a Dexter hub 8-258 the correct seal is the part # 10-9.
    view full answer...
    Image 1 for
  • How to Remove Bearing Races on a Trailer Hub
    The bearing races on a trailer hub, like the Trailer Hub Assembly, part # 8-258-5UC1, are removable, they are not built into the hub. I am including a link to a FAQ page on wheel bearings, races, and seals. Also, a link to a video of removing and reinstalling bearings, races, and seals. It will show, starting at the 2 minute and 5 second mark, how to remove a bearing race. You might also try to rent from an auto parts store a bearing/race removal and installation tool, or you might see...
    view full answer...
  • How to Determine the Size of a Trailer Hub Assembly for Replacement
    To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose # 8-258-5UC1. If the inner bearings are marked L44643, you will need # 8-258BTUC1. If you do not have the old bearings, you need to measure the inner bearing surface on the spindle to determine if the 1.063 inch dimension or 1.00 inch dimension will be needed to accept the bearing. You...
    view full answer...
  • Where are the Bearing Numbers on a Bearing to Determine the Right Replacement Hub for Boat Trailer
    I will need to know the inner and outer bearing numbers stamped into the sides of the bearings in order to determine the correct replacement hub for your boat trailer. I have included a picture that shows the location of the bearing numbers. You can also measure the spindle if you cannot read the numbers on the bearings. The picture also shows where you would measure. You will need to use a set of dial or digital calipers to take the measurements because they have to be as accurate as...
    view full answer...
    Image 1 for
  • Looking for Replacement Hubs for Boat Trailer with 1.06 Inch Diameter Spindles
    Since you successfully measured your spindles, it sounds like you might have a digital caliper lying around somewhere. Measure the hub bore (inside diameter of hub where grease cap sits). If this diameter is 1.98 inches, your existing bearings are # L44649, in which case the # 8-258-5UC1 hub you referenced would indeed be a correct replacement. Since the hubs are going on a boat trailer, I'd recommend you use galvanized hubs like part # 8-259-50UC1. The hubs are identical to the ones...
    view full answer...
  • Is There a Hub Available with L44649 an LM11749 Bearings
    It sounds like you might have an older agricultural hub and spindle on your trailer based on the LM11749 bearing that you referenced as I can not find any information on hubs with that bearing number. I am going to send you a separate email that is going to have a picture of a spindle with measurements on it. If you could use a dial caliper and give me those measurements I would be able to know for sure if there is a hub that I could recommend for you.
    view full answer...
  • Replacement Trailer Hub Ranger Trail
    From past experiences with your trailer we do know a bit about what hubs are typically going to fit but I would recommend you verify first by checking your trailer. We have found that your trailer has inner bearing L68149, ID 1.378, race OD 20362, outer bearing L44649 ID 1.063, and race OD 1.980. I recommend the Dexter Trailer Hub Assembly # 8-247-50UC3-EZ. This hub features a grease cap that is compatible with EZ lube spindles that have a grease fitting out the end of the spindle....
    view full answer...
    Image 1 for
  • Axle Flip Kit Recommendation for a 1995 Jayco Tent Trailer
    If your leaf springs are mounted below your axle you could use an axle flip kit (over under kit) to get additional ground clearance. This is the best way to gain ground clearance and should work well for you. If you have 3 inch axles you would want the Over Under Kit # K71-385-00. If you have 2-3/8 inch axles you would want the Over Under Kit # K71-384-00.
    view full answer...
    Image 1 for
  • Raising a Jayco Tent Trailer for More Ground Clearance and Using Larger Tires and Wheels
    First, I do not recommend using a spacer to raise the trailer because doing so is going to affect the deflection of the suspension leaf springs and could lead to premature wear. If you want to raise the trailer height a safer way there is an option. You can have taller hangers welded on to get more height. I have linked the hanger main page for you. Please note that raising the trailer height in any way is going to raise the center of gravity and the trailer will be more likely to sway. You...
    view full answer...
  • Replacement Hubs for 1994 Shelby Haulin Trailer
    To find the correct hub for you, I will need to know the wheel bearing numbers or an accurate measurement of the spindle with a digital caliper. I will also need to know the bolt pattern of the hubs you are replacing. The cages that the wheel bearings sit in should have a reference number stamped on the back of them (see diagram). I will also provide you a diagram showing where on the spindle the measurements need to be taken. You will also want to make sure that your spindles are...
    view full answer...
    Image 1 for




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lisa S
Updated by:
Lisa S
Employee Sarah W
Updated by:
Sarah W
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.