This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.5 out of 5 stars (34 Customer Reviews)
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.I ordered Dexter backing plate assembly and drum. Great prices! The drum came with races, bearings and grease seal. Everyone else that I checked with, races, bearings and the were extra and at higher price! I received all the items when expected. I would definitely recommend etrailer to anyone looking for great prices and customer service. Thank you etrailer
Jay M - 09/14/2016I received 3 boxes all of which had some sort of damaged or destroyed parts in it. All of the bearing kits are garbage, I will need replacements. The back plate and pad assemblies were ok, only two I had to installed the adjuster bolt back into and inspect for damage, but only received 2 of 4 nut and plug kits seen in pictures attached. Everything was improperly boxed, boxes are way too large for these components and hardware/bearing kits were packaged with very heavy components. Bearing kits should have been shipped separately in a small package. Bearing kit was also not in a proper bag, if not a ziploc at least tape the bag shut. I hope the drums are ok, I will have to grind on 2 of them just to allow the wheel to mate properly. I will have to measure all of the races and drum dimensions to ensure they are not warped or bent in any way. Extremely unhappy with this purchase. What a waste of components.
Jenny N - 11/19/2021
I bought these to use on a fairly heavy (about 12k #, loaded) 5th wheel. These were bought to replace ones previously purchased w/ 1/2" lugs. I didn't realize there was a difference until they were already installed. Now everything is working beautifully, except I'm now in the middle of replacing the chinese-made wheel bearings that came with the replacements from Etrailer, the reason for 3 stars, vs. 5. Not only is the origin questionable, but the bearings and cups were shipped loose in a bag with the rest of the hardware (lug nuts, etc.) Precision bearings must be individually wrapped, boxed, and never touched directly by human hands, to prevent corrosion, and contamination which lead to early failures. Sorry, but these things are only good for low-speeds, and short distances, such as farm equipment.
Olemax - 03/24/2018Same or better than original hubs. Packaged well and arrived 100% intact.
Brake drums and backing plate assembly had great availability and pricing was excellent , shipping was fast...
andy d - 06/20/2020Product was shipped quickly and very well packed , absolutely no box damage for such a heavy item. The hubs look well made and came with all the hardware. Bearings are made in china but what isn't these days my advice is to purchase a bearing grease packing cone so you insure your bearings are fully packed . Everything fit perfectly .
Kelvin - 01/02/2019I recently borrowed a trailer from a friend of mine and it had to have been infested with grease worms. Needless to say, burnt up a bearing and spit the hub off before I made it to load. I found the parts I needed on this website, but had to purchase seals and dust caps I didn't need along with a kit as well as the correct seal and dust cap for my trailer. I was also disappointed when the EZ LUBE dust cap I purchased did not come with the rubber access plug. I got it put back together, and with a little duct tape to cover the dust cap, the tractor will be moved tomorrow.
Quick efficient and economical Superb service Got us rolling again!!!
Looks like an exact replacement hub for dexter 7k axle lost a brake shoe on a new 42 foot 2019 forest river fifth wheel, overheated the bearings and seal, this has the same bearings as the original, yes, bearings are from china but so are the original hubs and bearings from dexter, I bought 4 of these a few years ago to update our previous fifth wheel a 32 foot nuwa ran them for over 8k miles with no problem
Products are good quality and came in q uickly.
Product arrived damaged. The bearings and grease caps are damaged. Retailer posted a credit due to the problem. Great company a fast reply on products.
I made a big mistake and ordered the wrong hubs for my trailer. Called etrailer and got a return authorization and expedited the correct ones. Delivered on time and fit great. Everyone at etrailer and the on line info was very helpful.
Order arrived ahead of time, everything was complete. Will definitely use Etrailer again.
The product, Dexter brake drum assembly, was exactly as advertised and delivered as promised. I could not have asked for any better product quality or service.
Fit excellent, exactly what i expected.
Had some rust on outside bearing race but I think it cleaned up good enough that it won't be a problem. Otherwise very happy with transaction.
Great quality! Made in USA. Fit perfec tly!
Everything looks good. I purchased this hub assy a a spare for my 50ft Featherlight and thankfully have not had to use it
Exactly what was needed and dexter genuine parts
Your team member was very helpful!! I had tried 2 other companies who just shot me down your guy went the extra mile to get me the right hub!!! Thanks!!!
Looks ok haven’t used it yet
What we needed for the Big Tex trailer.
It was a pleasure doing business with them. Receive the item quickly and at a great price. My customer was very please with how fast I got the job done. Will definitely do business in the future.
Exactly what I needed and works well!
Absolutely love them! Exactly what I expected! Great service and product!
Do you have a question about this Trailer Hubs and Drum?
Condition: Missing Parts
Notes: This product is a bit worn on the side and the grease cap is damaged. It might still fit the hub but it won't have a clean appearance. Otherwise, all other hardware is present and would work properly. Might just have to replace the grease cap.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.