Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
(139 reviews)
Price: $259.59
In Stock
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
Item # 8-201-9UC3-EZ
Our Price: $259.59
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (139)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-201-9UC3-EZ
- 6 on 5-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- Hub with Integrated Drum
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Pre-Greased
- 15123
- 25580
- Dexter
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Pre-greased hub is easy to install - no need to pack bearings
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb and 6,000-lb E-Z Lube trailer axles with #42 spindles
- Drum dimensions: 12" diameter x 2" wide
- Bolt pattern: 6 on 5-1/2"
- Grease cap flange diameter: 2.44"
- Wheel bolt diameter: 1/2"
- Weight capacity: 3,000 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 15123 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 15245
- Grease seal (included): GS-2125DL
- Inner diameter: 2.125"
- Outer diameter: 3.376"
E-Z Lube-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-201-95 Dexter Pre Greased12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube
Replaces 8-201-9UC3-EZ
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased - 8-201-9UC3-EZ
Average Customer Rating: 4.8 out of 5 stars (139 Customer Reviews)
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.by: James04/20/2022
What a difference, night and day! Worth every penny. My trailer rides like a dream now, the independent suspension made such a difference, no more bouncing on the roads especially when it gets rough. Customer service was excellent and they answered all my questions and made sure I had all the right equipment I needed. Would definitely do this again if I built another trailer.
by: Jeff03/05/2023
Perfect fit for my united covered trailer. Very easy install. Also made in the USA!
by: Tyler 08/16/2023
Very easy to convert from old mobile home hubs. Braking power is incredible.
by: Brilan05/29/2016
Would like to thank Etrailer.com For The Great Products and service! These Drum Assembly's worked amazing with the electric Brake assembly's I ordered with them. Products came in within 3-4 days! Can't beat that. Thanks ETrailer, got my trailer stopping again and didn't break the bank!
by: Richard09/13/2018
Fast Free shipping. Needed to replace all four hubs. Some had bad magnet wear. Two had loose races. Had great assistance selecting measuring original bearings to make sure I got the right parts. Heave shipping boxes. They did a good job stapling smaller boxes to the bigger box which helped boxes stay together.
by: Bryan 07/26/2023
Great, always great support from the eTrailer team and arrived on time for trip. Thank you
by: Jessie F03/28/2017
Comes with everything you need for fresh hub & bearings. Shipped fast! Great fit.
by: Thomas05/18/2022
has performed as expected would buy aga in
by: Robert07/30/2022
Exactly the right part, with all the required pieces. Really helpful that the bearing races were already pressed, made it a very simple job!
by: Angus11/09/2022
Easy to install. Performed well. Easy to lube.
by: Roger06/07/2018
Fast Shipping!! Hub fit exactly as it should.I really had nothing to go by to find this hub.Went to etrailer and started searching questions submitted by others.In a very short while was able to find my axle number and there it was. I would highly recommend and will use for future purchases.
Roger
6/7/2019
Great, no issues.
by: Alan12/02/2016
Item: 8-201-9UC3-EZ; This item Is a replacement for my 5th wheel camper. Do to the fact while traveling the outer bearing failed on interstate I-40 late in the evening. The cost of replacing brakes, drum, bearing, seals, grease, plus service cost is Very Expensive after hours. Having these items on hand can save a lot of time and money.
Etrailer parts are top quality and best online price.
Thanks
Alan
12/6/2017
Great! I have recommended this item any times. Thanks, etrailer.com
by: Mark09/23/2022
Sheryl was very helpful and knowledgeable in getting the right product to fit my Timbren suspensions. They were out of one of the Brake packages but she kindly split the order for us and got us what we needed asap while the other item is being restocked. Sheryl gets 5 stars from me!
by: Robert N.05/05/2017
Excellent service from etrailer staff. Super fast delivery. I wasn't expecting the drums to come with the spindle nuts and retainer clips. Pleased to see them in the boxes. They weren't listed with what is included on the site. Parts seem to be of good quality. I wish installing them was as easy as ordering them.
Robert N.
5/5/2018
No longer have these. I went to bigger axles. However, they worked great. When I need replacements on new axles, I will be purchasing from etrailer
by: The Donald10/07/2022
I bought these in 2014 for $79 each, now they are $247 each. Lets go Brandon.
by: John a05/10/2018
received on time as promised. good replacement part but make sure you measure the axle grease seal. they come with 2 1/8 inch seals and my application required 2 1/4 inch. fortunately for me I had the spare seals on hand from previous order.
John A.
5/10/2019
brakes are working perfectly.
by: Doug 06/05/2023
As always excellent service ty
by: Chester L.04/11/2017
I am writing this very favorable review of my online shopping experience with etrailer. Recently I had to replace the brakes, hubs, wheels and tires on my travel trailer. Please keep in mind that I am a 65 year old man without a lot of experience with online shopping. Never-the-less, I decided to give it a try in hopes of saving some money. To my surprise, etrailer made the experience very easy and painless. Before I placed my order on line, I had a question about one of the items on my shopping list, so I placed a call to them. I spoke with a very lovely and patient Customer Service Representative by the name of Michelle S. She was very helpful in answering my questions and encouraged me to call her back directly when I was ready to place my order; and so I did. During the shipping process, she kept me informed through emails the status of my order and everything arrived on time and in great shape. I truly appreciate the personalized services I received doing business with etrailer. They truly removed all of the uncertainty and nervousness of shopping online.
by: Wayne S03/31/2015
I bought the whole package, the brake assembly and hubs. It even came with bearings, rear seal and lug nuts. The shoes are
already on the backing plates. All you need to do is bolt the backing plate to the axle which is five bolts and splice the electric brake wire to your trailer wire. I thought the price was very reasonable and I got free shipping which would have been $126.
Very happy with this company and will do business with them again in the future.
by: Justin Paris04/06/2016
I ordered four Dexter drums and brake kits. Shipping was FAST, my order was placed about 3:45 one afternoon and at 12:15 the next day UPS was unloading it.
The quality of the Dexter parts was what I expected and the reason I paid extra. What I didn't like china made bearings, races and seals, so I spent another $180 with another supplier for U.S.A. made Timken bearings and races.
by: Jessie01/28/2018
Was easy to install. No issues in the first year. Still looked brand new when we repacked
by: Nice to have good details when puchasing a product08/14/2017
Nice to have good details when puchasing a product over the web. Fit as described. Great personal support when calling in as well. Purchased to convert stock humvee trailer 8 lug to 6 lug. Fit as described and quality was great.
Robert V.
9/5/2018
All the product I purchased has been working great.
by: Robert07/28/2022
The quality of the drums seems to be good but the bearings are Chinese which I wanted to avoid. I will replace them with Timken at additional cost to me.
by: Glenn08/06/2018
The 8-201-9uc-ez trailer hub assy i ordered was great quality and exact fit. The customer service second to none. etrailer is a top notch company and will be my GO TO provider for my trailer needs from now on. Only improvement id like to see is the option to get Timken bearings in the wheel kits as they only provide the chinese junk as do most other companies. Great shopping experience. Thank you Gwendolyn for all your help!
by: Roger06/29/2015
This was a great purchase and a fair price. saved me a lot of time putting the brakes back together. I purchased new back plates with the pads and all parts pre-assembled and ready to bolt on the axles. slide on the new drums and bearing and i was done. quick easy and not expensive.
Would highly recommend buying from etrailer.
25
139
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and TiresTo determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to obtain these measurements. You will need to measure the seal, inner bearing, and outer bearing. It is also possible that there may be bearing numbers stamped on these parts as well, and those would be helpful in obtaining the correct replacement...
view full answer...
- Will 12x1.5 Mag Seat Lugs Fit Dexter Trailer Hub and Drum Assembly I talked to our resident tire expert who has years of experience and the 12 x 1.5 mag seat lugs will not fit the Dexter Trailer Hub and Drum Assembly, Item # 8-201-9UC3-EZ. This hub and drum has a wheel bolt diameter of 1/2 inch so you would need something that fits that size. While we do not carry them, he did recommend looking for 20 x 1/2 mag/shank lugs and trying them. Wish we could help and good luck with the hunt!
view full answer... - Mobile Home Hub Recommendation with # 42 Spindle DimensionsFor your spindle dimensions we have a hub and drum that will fit. For that you would want the part # 8-201-9UC3-EZ which comes with bearings that match what you have. This is also a 12 inch by 2 inch drum like you said you need as well.
view full answer... - Replacement Motor Home Axles, Hubs, And WheelsI understand that your primary use of this motor home will be on your property. If you had a traditional trailer this would not be an issue, but since you have a motor home we have some limitations to deal with first. Your motor home axle is not a standardized axle size. Due to this, your motor home axle does not have any replacement hubs available. Since motor home axles are not replaceable, by design, manufacturers did not design aftermarket hubs for them. As a result, we do not have...
view full answer...
- Replacement Hub/Drum for Dexter 8-210I do have an option for you but there is not really a complete conversion kit for what you are looking for. The best option would be to just replace the axle. In order to do this I would need to know what your hub face and spring center measurements are as well as the axle capacity. However, if you want to save some money then we may have a new hub/drum for you that uses a standard bolt pattern. In order to confirm if this is an option I would need to know what bearings and seal your hub...
view full answer...
- When is it Time to Replace a Trailer HubIf the armature surface where the brake magnet is damaged, or if the area where the bearings ride is showing wear or is damaged it would be time to replace the hubs. If you had bearings go out in the hub and you continued to drive on them for a while, to the point where the hub is damaged it would be time for the hub to be replaced. To pick out replacement hubs you will need to get the numbers off of the bearings plus the bolt pattern of the hubs. With that info we can pick out the correct...
view full answer...
- Solution for Needing Replacement Hubs for Mobile Home AxleI wish we had an easy solution, but for your older trailer with mobile home axles we aren't going to have a hub that will fit on your spindle. Mobile home axles are made for one time use and the parts they use aren't standard. You are going to need to measure your current axles in a few places to get the correct one. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached...
view full answer...
- How to Determine Replacement Axle for Boat TrailerUnfortunately the only option you have is to replace the entire axle. The reason for this is mobile home axles are designed for a single use, to get the mobile home from point A to point B and is not intended for any other purpose so it very important you replace that axle. From there you can convert to a tire that is as large as you have room for and that fits on your wheel and hub. In order to choose the correct replacement axle you will need to know the dimensions of your current axle's...
view full answer...
- How to Pick Out Parts for Adding Drum Electric Brakes to a TrailerWe have the parts you would need to add electric brakes to your trailer, but we do not have them all together in a kit. You should note that most people try to avoid running electric brakes on boat trailer since water and electricity don't mix well generally. We recommend unplugging the trailer connector before backing the trailer into the water. I attached a help article that will walk you through the whole process. But basically you would need to determine first what spindles you have...
view full answer... - Is Hub part # 8-201-9UC3-EZ Made by DexterThe Dexter hubs and trailer components we offer like the Dexter hub part # 8-201-9UC3-EZ that you mentioned are the same Dexter products you'd get anywhere else. We sell enough of the Dexter products that we are able to offer them at a very competitive price!
view full answer... - Back of Drum to Hub Face Measurement for Dexter Hub and Drum Assembly for 5.2K - 6K AxlesI went out to the warehouse and found the dimension that you asked about for the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ was about 4-1/8". I have attached a photo to demonstrate this.
view full answer...
- Does 12 MTI on Dexter Trailer Hub # 8-201-9UC3-EZ Refer to Part Number or FitThe 12 MTI or the 6 MTI that you are seeing on trailer hubs like the # 8-201-9UC3-EZ that you referenced is not related to the part number or fit so it wouldn't be something you'd need to match. If you see 8-201 on your hub and/or it's a 6k trailer axle then this for sure is the correct fit for you.
view full answer... - Does Dexter Hub/Drum # 8-201-9UC3-EZ have 6k CapacityThe hub you mentioned part number K08-201-91 is our part # 8-201-9UC3-EZ and is a 6k axle from Dexter. It's actually pretty common though for axles with capacities ranging from 5,200 to 7,000 lb to share same hub setups so I could see pretty easily how there'd be confusion there.
view full answer... - Where Are the Bearings and Races Made that Come with the Dexter Hub and Drum Assemblies?The Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-9UC3-EZ is made in the USA. I reached out to my contact at Dexter and the Races and Bearings that go into those assemblies are made in China. Because the hub/drum is made and assembled in the USA, they are able to label the assembly as such.
view full answer... - Will Trailer Hub and Drum 8-201-5UC3-EZ Fit in Place of K08-201-95You can use hub and drum assembly # 8-201-9UC3-EZ in place of K08-201-95. The only difference is the appearances between the 2 are slightly different. Everything else is the same. I have included a link to a video review of this hub and drum assembly for you.
view full answer... - Difference Between 8-201-9UC3-EZ and 8-201-5UC3 Trailer HubsThe biggest difference between the hubs part # 8-201-5UC3 and # 8-201-9UC3-EZ is the grease cap style and the weight capacity. The # 8-201-5UC3 is for non EZ lube spindles basically which means it has a solid grease cap and has a 2,600 lb capacity, and # 8-201-9UC3-EZ instead has a grease cap with a removable center section to allow access to a zerk fitting and has a 3k capacity.
view full answer... - Replacement Trailer Hub/Drum With 8-201 Casting Number On HubThe replacement hub/drum you mentioned, part # 8-201-5UC3 is rated for a 5200 lb axle (a de-rated 6000 lb axle). That particular hub/drum is compatible with a 25580 inner and a LM67048 outer wheel bearing. If your axle is indeed rated for 6K and uses a 25580 inner and 15123 outer wheel bearing. If that's the case, you'd need the # 8-201-9UC3-EZ hub/drum. The different outer bearing is what de-rates the hub. The hubs include the races, bearings, grease seals, lug nuts and grease caps compatible...
view full answer... - Replacement Hub & Drum Assembly for Dexter 5,200 lb. AxleDouble check your axle markings regarding the 5,100 lbs. We have the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles, # 8-201-5UC3. This is a 12" Diameter - 6 on 5-1/2 assembly. This is compatible with electric or hydraulic brakes. The inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included. We also have the, # 8-201-9UC3-EZ an E-Z Lube Dexter Trailer Hub and Drum Assembly that is 12" - 6 on 5-1/2. Each option...
view full answer... - How to Determine if Trailer Hub 8-219-9UC3 Would Fit SpindleI'd need more info on your axles to know if the hub you mentioned would fit. Is there a sticker or label on it with any info/part numbers? Otherwise you'd have to pull off a hub to get me the dimensions of the spindle or the bearing numbers. The # 8-219-9UC3 uses bearing numbers 25580 and 14125A and has spindle dimensions of 1.25 inch and 1.75 inch.
view full answer...
- Can a 6,000 Lb Dexter Drum Be Used On a 5,200 Lb Dexter AxleThe LM67048 (5,200 lb Outer Bearing), 15123 (6,000 lb Outer Bearing), and even 14125A (7,000 lb Outer Bearing) all have the same 1.25" inner diameter so you can use any of them on a 5,200 lb axle. For this, I recommend the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ which has a 6 on 5-1/2" bolt pattern. If you want to go up to the 8 on 6-1/2" bolt pattern you would need the Dexter Trailer Hub and Drum Assembly part # 42866UC3-EZ which uses an 14125A outer bearing.
view full answer... - How to Determine if a Trailer Hub with a 6 on 5-1/2 inch Bolt Pattern is a 3.5k or 6k AxleTrailer hubs with a 6 on 5-1/2 inch bolt pattern can have an axle weight capacity of between 3,500 and 6,000 lbs. The diameter of the axle will be your next place to look to narrow down the capacity. If it is 2-3/8 inches it's going to be a 3,500 lb capacity or if it's a 3 inch diameter it's going to be a 6,000. For an EZ lube 3,500 with the right bolt pattern you would need part # 84656UC3-EZ, or for a 6,000 lb you would need part # 8-201-9UC3-EZ.
view full answer... - Dexter Hub/Drum and Bearings that Fit 5,200 lb Trailer AxleFor a Dexter hub/drum that fits a 5,200 lb axle and includes bearings, seals, and lug nuts we have the Dexter part # 8-201-9UC3-EZ which includes the same bearings Dexter uses that are made in China.
view full answer... - How to Pick Out a Replacement Hub for a AL-KO T60 AxleIn order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. First thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride. If you get back to me with that information I will help you pick...
view full answer...
- Replacement Hub/Drum that Could Fit Henschen Duraflex 5,000 lb AxleHenschen has been out of business for about 12 years, so I wasn't able to find much information about your axles online. From what I was able to find they seem to use standard trailer bearings and hubs. So the part # 8-201-9UC3-EZ should work but you might still verify the bearing diameters on the spindle as 1.25 and 1.75 inch.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Patrick B
Video Edited:
Joshua S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thomas
5/19/2023
part is working as expected would buy again