1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 4 on 4 Inch
  4. For 2200 lbs Axles
  5. Hub with Integrated Drum
  6. Standard
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4

Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4

Item # 8-173-16UC3
lowest price pledge
Our Price: $92.46
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
4 on 4 Trailer Hub/Drum Assembly
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This hub-and-drum assembly fits 2,200-lb axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4 part number 8-173-16UC3 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (18)
  • Q & A (53)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 8-173-16UC3

  • 4 on 4 Inch
  • For 2200 lbs Axles
  • Hub with Integrated Drum
  • Standard
  • 10 Inch Wheel
  • 12 Inch Wheel
  • 13 Inch Wheel
  • L44649
  • Dexter Axle
  • L44649
  • 1/2 Inch Stud

This hub-and-drum assembly fits 2,200-lb axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 2,200-lb trailer axles with BTR spindles
  • Wheel size: 10" to 13"
  • Drum dimensions: 7" diameter x 1-1/4" wide
    • Works with 7" x 1-1/4" brake assembly
  • Bolt pattern: 4 on 4"
  • Grease cap flange diameter: 1.98"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,100 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


008-173-91 Dexter Trailer Hub and Drum Assembly - 2,200-lb Axles - 4 on 4

Replaces 8-173-16UC3 and HD701BUC3






Customer Reviews

Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4 - 8-173-16UC3

Average Customer Rating:  4.1 out of 5 stars   (18 Customer Reviews)

This hub-and-drum assembly fits 2,200-lb axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

- 8-173-16UC3
by:

Everything in one package taped to the hub. I would have offered more protection for shipping to the bearing and seal then just taping it to the hub but it did arrive unscathed. Quality seemed good. Went together easy. Lost the first dust cap on my first trip around the block for a brake adjustment test. Lost the second on the second trip (about 10 miles). I ordered replacement dust caps and the tap on tool. Not sure if I didn't have them on well enough or if there is a product problem there. I have done a lot of these and never had a problem before. 369776



- 8-173-16UC3
by:

Exactly what I needed for conversion from hydraulic to electric brake system on 1994 Jayco King pop-up camper. 866774



- 8-173-16UC3
by:

Electric Brake kit for trailer this time. The parts are very acceptable and the service is supreme. Couldn't get any better service anywhere. I've bought a lot of items from etrailer for a couple years now. I have had great experiences with each and every order. 384639



- 8-173-16UC3
by:

I had to replace one hub on my pop-up camper and decided I should do both wheels. The parts I ordered came very quickly (3 days), without having to pay extra for quick shipping. The parts matched perfectly and the job went very smoothly. My only complaint is that one of the hub covers/grease seals was dented and bent. It looks like it was damaged during shipment as it was not packaged separately but instead was taped to the outside of the hub. Luckily one of my old seals was reusable and everything worked out. 383216



- 8-173-16UC3
by:

A year ago I bought these as part of an overhaul for a 1976 coleman pop-up camper. Many parts on it were obsolete, so I had to change the drums along with the entire suspension. I am pleased to say they work great with my electronic brakes! We've taken our refurbished trailer on 2 long-distance trips (including one into the mountains) and the brakes and drums perform very well! 382867



- 8-173-16UC3
by:

First of all, the product description on the eTrailer website was very detailed and very complete. With all the different axle sizes and types out there, it was nice to have the specs to make sure I was ordering the right part. I like the shipping tracker. It's easy to use, and I knew where the shipment was, and when to expect delivery. That was nice, because my hub arrived a day later than I thought it would. (When you order on Good Friday, on Easter weekend, 3 day shipping might take an extra day. I should have expected that.) I thought that rebuilding the existing hubs would be a good idea. And it was. But while driving the new bearing race into place, I let the race get crooked, and I cracked the hub. The old hub uses bolts to mount the wheel. The new hub has studs and lug nuts, which makes tire changing much easier. The new hub comes with the race pre-installed, just have to apply grease and tap in the rear seal. very easy. All things concidered, I'm very happy with the entire process, and will probably order a roof rack for my pop up camper from etrailer in the near future. 370199



- 8-173-16UC3
by:

The first 2 drum and hub combos i got were machined crooked and the second set had to be turned on a drum lathe before the brakes would work properly. I lost time and money being broke down and paying to have the drums checked and turned at a machine shop. Maybe made in China? The people at e trailer were helpfull and prompt no complaints there, just the quality of product. 284758



- 8-173-16UC3
by:

Fit my 1997 Starcraft Starflyer 1021 popup camper. Only problem was that it came with the wrong bearings (came with L44643 instead of L44649). Had to call and now I have to wait another week to do the job. 246352



- 8-173-16UC3
by:

Not sure if these hubs are going to work. Spent a hour today installing and found small size differences between old and new ones. I thought kit was supposed to include everything, but it was missing cotter pins and bearing washers. This was not my first purchase from etrailer, but I could of used more information on hub dimensions. I was replacing surge brake hubs for a 1992 Jayco popup. I would suggest adding links to mechanical drawings with guidance on what and where to measure to get the best product. 235104



- 8-173-16UC3
by:

Came extremely fast and just what I ordered and needed. 224063



- 8-173-16UC3
by:

These are to replace old 7 1/4" brakes on an older pop up camper frame that I built a small camper on. Looks they will work perfectly with the new Dexter 7" brake assembles I have. 171359



- 8-173-16UC3
by:

Erica at etrailer.com was extremely helpful in helping me select the right breaks for my trailer application. The ship time was incredibly fast installation was a breeze and customer service is top notch!!! 165567



- 8-173-16UC3
by:

We received our order in record time. The representative was most helpful, and we received the item that we needed. 153179



- 8-173-16UC3
by:

I received my parts, packed the bearings, installed the brakes and backing plates assemblies. installed the drum and hubs, adjusted the brakes and on the road we go. It took 1 hour to do both sides and they fit perfect. Thanks etrailer.com 148814



- 8-173-16UC3
by:

all parts were there, and works OK. 132748



- 8-173-16UC3
by:

no problem all went great 127165



- 8-173-16UC3
by:

INSTALLED AS DIRECTED BY INSTRUCTIONS-- APPRECIATE YOUR DELIVERY ETC. WILL BE USING YOUR SITE FOR FUTURE NEEDS-- GUARANTEED-- THANKS TO YOUR SERVICE 86449


Comments
DID THE JOB FOR OUR TRAILER-
LARRY S - 12/28/2014

8241

- 8-173-16UC3
by:

Ordered 4 parts as part of an update to my tandem axle trailer. The correct lip seal is included with 3 and one has the wrong lip seal(too wide and wrong ID). Compatibility information with other parts ordered (brake assemblies in this order) is valuable. 16096


18
18

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Converting 1994 Jayco Camper From Hydraulic Brakes to Electric Brakes
    I have attached a great article at the bottom of this page that details all the components needed to install electric brakes on a trailer. The particular parts you need will depend on the camper's axle capacity along with the inner and outer bearings that are used on your existing hubs. This is needed to determine the correct hub and drum assemblies that will fit the spindles on the axle. If you can tell me the inner and outer bearing numbers, which should be stamped right inside the...
    view full answer...
  • Recommended Hub And Drum for Electric Brakes With 4 On 4 Bolt Pattern For 1973 Scamp Trailer
    The hub we offer that will work with electric brakes and has a 4 on 4 bolt pattern, is part # 8-173-16UC3. You are correct that this hub and drum will only work with 7 inch x 1-1/4 inch brakes. The bearings, races, and seals are included with this assembly. I have attached a product review video for this hub/drum you can check out. The electric brakes that will work with this drum is designed for axles rated up to 2,000 lbs. The brakes have a 4 bolt mounting flange. For the right...
    view full answer...
  • Replacement Hub and Drum Assembly for 1974 Tee Nee Boat Trailer with 7 inch Electric Brake Drum
    The information you provided is great! From your part numbers I was able to find that the bearings would be a direct switch but that the grease seal and grease cap dimensions on the hub you have and the, 8-173-16UC3, 4 on 4 Trailer Hub / Drum Assembly are different. The, HD700ACU3, Complete hub and drum assembly is the part you would need for a direct replacement.
    view full answer...
  • Converting Existing Hydraulic Brake System to Electric on Pop-Up Camper
    The Dexter Hub/ Drum you mentioned, part # 8-173-16UC3 would be a proper replacement for you as long as the inner and outer bearings in your existing hubs are # L44649, the grease seal is # 10-9 and the 4-on-4 bolt pattern matches up with your existing hubs. Your existing bearings and grease seals should have reference numbers stamped on them, make sure the numbers on the existing parts match those of the replacements. You will also need electric brake assemblies, part # 23-47 for the...
    view full answer...
  • Recommended Hubs And Electric Brake Assemblies For Tandem Axle Snow Bird Snowmobile Trailer
    You can add electric brakes to both axles of your Snow Bird Snowmobile Trailer. To do so you will need new drums only on the axles that don't currently have brakes. You may be able to use your current surge brake hubs for your electric brake assemblies, but often electric hubs on this smaller size require a change due to thickness of the hub. For your hubs, I recommend the Trailer Hub & Drum Assembly - 2,200 lbs. Axles - 4 on 4 # 8-173-16UC3. For your electric brake assemblies, I...
    view full answer...
  • Is Dexter Axle Trailer Hub & Drum Assembly # 8-173-16UC3 Recommended for 1993 Starcraft
    The Dexter Axle Trailer Hub & Drum Assembly # 8-173-16UC3 is a compatible fit for the Dexter axle on your 1993 Starcraft so long as the weight falls at or below the product weight capacity of 2000 lbs and is compatible with your existing bearings. This assembly works only with 1-1/4 inch brake shoes, not 1-3/4 inch shoes and has a 4 on 4 inch bolt pattern. I have included a link to a video review of this item. The other two items you referenced, the Dexter Axle 7 Inch Brake Assembly...
    view full answer...
  • Can Drums from a Trailer with 7 Inch Hydraulic Brakes be Used When Converting to Electric Brakes
    You might be able to re-use the drums. Some 7 inch hydraulic drums are sized differently and will not allow electric brake assemblies to be properly positioned in the drum. Some times the hydraulic drums are too deep and will make contact with the brake backing plate before they are seated all the way on the spindle. The best way to proceed is to try re-using the drums first and if they do not fit get drums made for electric brakes or you can buy electric brake drums from the start. We...
    view full answer...
  • Smallest Diameter Rim the Trailer Hub & Drum Assembly # 8-173-16UC3 will Fit
    The smallest diameter rim the Trailer Hub & Drum Assembly # 8-173-16UC3 is compatible with is a 10 inch rim. It would not work with an 8 inch rim.
    view full answer...
  • Added Surge Brakes to a Pontoon Boat Trailer with 4 on 4 Bolt Pattern
    We have two different drums available for your 4 on 4 setup, but in order to determine which is correct, we need to get your old bearing numbers. Your hubs will have two bearings, an inner and an outer. When we determine what the bearing numbers are we can find the right hub/drum. The numbers will be stamped on the bearings themselves. You only need to disassemble one side of the trailer. I have added a link to a video that covers removing seals and bearings from a trailer hub. If...
    view full answer...
  • Availability of Replacement Washers for 1-Inch Spindle for Dexter Trailer Hubs and Drums
    Thanks for the comment. We do have replacement washers # SW1000 for the hub and drum you referenced # 8-173-16UC3. We also carry 1-inch trailer spindle nuts. The replacement part is # 165686. You may also need a cotter pin. The replacement part is # 165649. If you have an EZ Lube Spindle you will need different parts. Just let me know so I can make the proper recommendations. I have linked a video showing how to remove and reinstall a trailer hub.
    view full answer...
  • Distance from Wheel Surface to End of Drum on Hub & Drum Assembly for 2,200 lbs. Axles 8-173-16UC3
    I went out to the warehouse and pulled hub and drum assembly # 8-173-16UC3 to measure it for you. From the surface where the wheel would sit to the end of the base of the drum is approximately 3-7/8 inches.
    view full answer...
  • Picking Out Replacement Axle for 2005 Coachman Clipper
    That picture of your wheel is pretty crazy! I hope the damage was minimal and no one got hurt! If you damaged a bearing there's a pretty good chance you also damaged the spindle it rides on. You'd need to inspect the spindle to make sure it's free of damage. If it's damaged it's probably a good idea to just replace the axle since you are already at the point of replacing most of the axle. Especially if the hubs are currently pretty rusty on both sides most likely. You are going to...
    view full answer...
  • Replacement Wheel Studs for Trailer Hub part # 8-173-16UC3
    The trailer hub part # 8-173-16UC3 uses 1/2 inch diameter 2 inch long wheel studs like the part # RG03-060.
    view full answer...
  • Which Trailer Spindle and Brakes Are Used with Trailer Hub and Drum Assembly, # 8-173-16UC3
    For Trailer Hub and Drum Assembly, # 8-173-16UC3, you can use BTR EZ Lube Spindle, # TRU44FR. For bakes, use # 23-47 and # 23-48. When adding brakes to a trailer, you will need to make sure the trailer has a brake mounting flange welded to the axle. If they do not, you can add them and the welding will need to be done by a qualified professional welder. We have several mounting flanges, depending on your specific needs. You can find them using the link provided in the electric drum brake...
    view full answer...
  • Recommended 7-Inch Hub And Drum Assembly For Electric Brakes
    We do offer just the 7-inch hub and drum without bearings, seals, and races for hydraulic brakes but we do not sell the hub and drum for electric brakes without those components. The hub and drum assembly I recommend is part # 8-173-16UC3. This does come with the bearings, races, grease seal, grease cap, and lug nuts and is rated for 2,000-lb axles. This assembly does have a 4 on 4-inch bolt pattern.
    view full answer...
  • Brake Controller Recommendation to Activate Electric Over Hydralic Brakes
    Sounds like you have an electric over hydraulic actuator on your second trailer. Some brake controllers like the Prodigy P2 brake controller part # 90885 can be switched into EOH mode and will work to control the brakes easily. Some actuators have adapters that will allow any electric brake controller to be used with them but these aren't always reliable. Your best option would be to go with a brake controller that is confirmed to work on EOH brake systems like your trailer has like...
    view full answer...
  • Will the 7 Inch Trailer Hub/Drum # 8-173-16UC3 Fit on a 1987 MGS Handyman Cargo Trailer
    It sounds as if the wheels that are on your trailer are hub piloted, meaning that the center of the wheel is mated to the outer diameter of the hub not on the mounting studs. In this case the dimension of the hub protrusion is critical for balance of the wheel and tire. At this time we do not carry hub piloted hub and drum assemblies. You may find that these style hubs are only available from the trailer manufacturer. The # 8-173-16UC3 Hub and Drum Assembly, would work for your trailer...
    view full answer...
  • Diameter Of Grease Cap Included With # 8-173-16UC3 Hub And Drum Assembly
    I went to the warehouse and measured the grease cap that is included in the Dexter Hub and Drum Assembly # 8-173-16UC3. The diameter of the grease cap that is inserted in the hub measures 1.98 inches.
    view full answer...
  • Recommended Longer Wheel Lug Nut for Trailer Hub and Drum Assembly with 1/2 Inch Wheel Bolts
    I've got just the chrome 1/2 inch wheel lug nut you need. The Redline # 12CLN will work on your # 8-173-16UC3 1/2 inch wheel bolts. They are sold individually, so you will want to update the quantity to 8 for one axle. I have linked the chrome lug nut to this page for your purchasing convenience.
    view full answer...
  • Hitch and Brake Controller Recommendation for a 2016 Mazda CX-5
    We sell hub/drums with 4 on 4 inch bolt patterns like the part # 8-173-16UC3 which would then call for brake assemblies part # 23-48 for the right hand side and part # 23-47 for the left hand side. If you are still in the process of shopping for a pop up I would recommend you find one with brakes already installed so that you don't have to install them yourself. I attached a help article on adding brakes to a trailer. For a hitch for your 2016 Mazda CX-5 you would want the Draw Tite...
    view full answer...
  • Correct Replacement Brakes and Hub/Drum Assembly for '97 Jayco Popup
    The difference between part # 8-276-5UC3 and part # 8-173-16UC3 is that the 5UC3 works with a 7" x 1-3/4" brake assembly while the 16UC3 works with a 7" x 1-1/4" brake assembly brake assembly. Other than that they use # L44649 inner and outer bearings and a 10-9 grease seal that has the 1.5" inner diameter. You definitely want to go with assemblies that match your bearings so if you're able to confirm that you have L44649 bearings then I'd use one of the options mentioned above. The...
    view full answer...
  • How To Determine Axle Capacity of Trailer with 4 Lug Hubs with Brakes
    The only way to know for sure is to check your bearings. That being said, the most common 4-bolt configuration is a 4 on 4 bolt pattern, which are typically found on 2,000 lb to 2,700 lb trailer axles. The only 4 on 4 bolt pattern hub and drum assemblies we carry are for 2,200 lb axles and use # L44649 inner/outer bearings. See below. Compatible with 7 inch x 1-1/4 inch electric and hydraulic brakes # 8-173-16UC3 - Includes bearings, races, grease seal, standard grease cap and lug nuts. #...
    view full answer...
  • Replacement Trailer Brake Assemblies for 1983 Rockwood Pop Up Camper
    Your 20.5 x 8 - 10 tire, or also stated as 205/65-10 is compatible with 7 inch brake assemblies, like # AKEBRK-2. You'll also want to examine the armature surface of the brake drums where the brake magnet rides. If this surface is pitted and/or has grooves worn in it, you'll want to replace the drums as well. If your hubs use a L44649 inner and outer bearing and have a 4 bolt lug pattern, use # 8-173-16UC3. If you have a 5 lug with L44649 bearings, use # AKHD-545-2-2K or for L44643 bearings,...
    view full answer...
  • Spindle Recommendation for Trailer with 3 Inch Round Axle with 4 on 4 Wheel Bolt Pattern
    Technically, any of our spindles can be welded on the end of your 3 inch diameter axle. However, the 4 on 4 hubs indicate a lower weight capacity. So, if you're wanting to keep the 4 on 4 bolt pattern and reuse your existing wheels, the only option is the BTR E-Z Lube Spindle w/ Brake Flange # TRU27FR. This spindle is designed for 2,500 lb axles and will allow you to use industry standard hubs # 8-173-16UC3. This means that you won't have any issues finding replacement or maintenance...
    view full answer...
  • Parts Needed to add Electric Trailer Brakes to 1990 Skamper 190c
    You are able to install an electric braking system on your trailer. The parts needed are going to be determined by the axle that your camper is equipped with. From what I can tell from your picture, it looks like this is a 4 lug axle which is going to likely mean you have a 2,000-lb axle with a 1-3/4" diameter. In order to verify that is correct you will need to confirm that the Inner and Outer bearings on your trailer wheel hubs match L44649. You can verify this once you've taken it apart...
    view full answer...
  • Replacement Brake Drum for a 1998 StarCraft 2408 Pop Up Trailer
    When trying to find the correct drum brakes, a measurement of the inside drum diameter and the depth of the drum will be needed. See attached picture. The drum that you referenced, # 8-173-16UC3, measures 7 inches in diameter and 1-3/4 inches deep. Also this drum will have a 4 on 4 bolt pattern. If your drum has this measurement and your current shoes measures 1-1/4 inches wide, then this will be the correct part and work it well for your pop up camper. I have also attached an...
    view full answer...
  • Can 7 x 1-1/4 Inch Electric Trailer Brakes be Used w/Hydraulic Brake Hub for 7 x 1-3/4 Inch Brakes
    Hub and drum assembly # 8-276-5 is not a proper fit for 7 x 1-1/4 inch brake assemblies and should not be used with them. I know you are looking to save some money but believe me, you can spend a little now on the correct hub and drum assembly, # 8-173-16UC3, or a lot later after the additional length of the hub stress the bearings and spindles and you are looking at replacing the axles.
    view full answer...
  • Dexter Torflex #9 1000-2200 lbs Axle Hub and Bearing Kit Replacements
    The current hub for your Torflex #9 axle uses the inner and outer bearings # L44649 with a grease seal that has a 1.500" inner diameter. You can find the bearing kit as part # BK1-150 on our site. For a replacement hub we have the part # 8-91-05UC1 for a standard spindle or part # 8-91-05UC1-EZ for E-Z Lube spindles. If you have brakes then you would want part # 8-173-16UC3 for a standard spindle or part # 8-173-16UC3-EZ for E-Z Lube spindles. All of these hub kits come with bearings...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Jeffrey L
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924