1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 4 on 4 Inch
  4. For 2200 lbs Axles
  5. Hub with Integrated Drum
  6. EZ Lube
Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4

Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4

Item # 8-173-16UC3-EZ
lowest price pledge
Our Price: $99.91
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4 L44649 8-173-16UC3-EZ
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This hub-and-drum assembly fits 2,200-lb E-Z Lube axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4 part number 8-173-16UC3-EZ can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (40)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 8-173-16UC3-EZ

  • 4 on 4 Inch
  • For 2200 lbs Axles
  • Hub with Integrated Drum
  • EZ Lube
  • 10 Inch Wheel
  • 12 Inch Wheel
  • 13 Inch Wheel
  • L44649
  • 1/2 Inch Stud
  • L44649
  • Dexter Axle

This hub-and-drum assembly fits 2,200-lb E-Z Lube axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 2,200-lb trailer E-Z Lube axles with BTR spindles
  • Wheel size: 10" to 13"
  • Inner drum dimensions: 7" diameter x 1-1/4" wide
    • Works with 7" x 1-1/4" brake assembly
  • Bolt pattern: 4 on 4"
  • Grease cap flange diameter: 1.98"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,100 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"

E-Z Lube-Compatible Hub for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


008-173-92 Dexter Trailer Hub and Drum Assembly - 2,200-lb Axles - 4 on 4 - EZ Lube

Replaces 8-173-16UC3-EZ and 115440






Customer Reviews

Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4 - 8-173-16UC3-EZ

Average Customer Rating:  4.9 out of 5 stars   (16 Customer Reviews)

This hub-and-drum assembly fits 2,200-lb E-Z Lube axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

- 8-173-16UC3-EZ
by:

Essentially plug and play for my previous hubs. Great quality and fit. Would purchase again.



- 8-173-16UC3-EZ
by:

Well after receiving 2 different hubs and unfortunately of course installed the correct one first about 45 minutes or less. Perfect fit and finish. etrailer took care of the wrong hub and when i received it took around 30 minutes to install that side. If you have general knowledge and just a bit of mechanic skill you can do it. Added brakes to my 2008 pop up camper, have driven this over 8000 miles (or more) now and has worked flawlessly. Highly recommend.



- 8-173-16UC3-EZ
by:

Good product. I installed on my 2009 Jayco 1007 pop up and they worked. Always a plus. Received in about a week.



- 8-173-16UC3-EZ
by:

I purchased a pair of these to replace the hubs on my 2001 Jayco popup camper w/Dexter axle. They arrived quickly and included everything but the grease. The races are already installed, which is great. These are EZ lube hubs, but the only difference I could see is the EZ lube dust cap and a different hub seal. I installed these on non-EZ lube spindles and used the bearing buddies I already had. eTrailer was great in addressing the one question I had, the price was great, and I got free shipping with my order over $150.



- 8-173-16UC3-EZ
by:

Worked great and went on very easy. Feels a lot better to tow a trailer with brakes!!



- 8-173-16UC3-EZ
by:

Heavyweight and nicely machined



- 8-173-16UC3-EZ
by:

Needed electric brakes on my Scamper pop up camper 1997, to tow with my Subaru (needs brakes over 1 000 lbs). These fit perfectly. Easy to install and a breeze when you drive.


Comments
Thank you for asking. I am very happy with my purchase. Worked great last summer and I look forward to taking the road again with my Skamper camper and feeling secure. Have a great summer
Louise G - 05/29/2018



- 8-173-16UC3-EZ
by:

New hubs were shipped immediately after ordering and arrived the next day. They fit my 2004 Viking Epic 1706 perfectly. I was able to change them out in about one hour and get on the road to Florida. I re-torqued the lug nuts and checked the hub temperature at every gas fill up and they never got warmer than the tires. Drove 1000 miles in two days with no issues. Thank you etrailer for quality parts at great prices and excellent customer service.



- 8-173-16UC3-EZ
by:

This is a great product for a great price. Perfect fit and easy assembly for the inexperienced. I put 5000 miles on this set immediately after install and it worked flawless with brake control. Highly recommend etrailer products and great service.



- 8-173-16UC3-EZ
by:

Well made, fast shipping, everything just as it should be. Thanks etrailer!



- 8-173-16UC3-EZ
by:

Product delivered as ordered. Great communication throughout order process by Patrick, and order was delivered very fast. We will use etrailer.com again for future requirements. Thanks!



- 8-173-16UC3-EZ
by:

Fairly priced and it came one day sooner than expected. Very satisfied with the service so far. I’ll post an update when I get to try the parts I purchased. Thank you ETRAILER!



- 8-173-16UC3-EZ
by:

Great quality dexter product. Was a quick and easy replacement for the worn drum on my tent trailer with a 3000lb dexter axle.



- 8-173-16UC3-EZ
by:

I ordered two of these. They arrived quickly and works perfectly.


Comments
Ive had these brakes for a year now. I am still pleased with them. Although I did have trouble with the Drivers side unit at first. I could not eliminate a squeak when applying the brakes. eTrailer worked with me to resolve the problem. They sent me a total one side replacement. I recently completed a 300 miles trip with the camper and the brakes worked perfectly. No more squeak.
Don - 09/09/2019



- 8-173-16UC3-EZ
by:

Looks great! Best price, amazing fast s hipping Thanks



- 8-173-16UC3-EZ
by:

excellent product very happy with the s ervice


16
16

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Recommended Hubs and Electric Brakes for 2015 Jayco Sport 10SD
    You are absolutely on the right path! I was able to contact Jayco and confirm that your 2015 Jayco Sport 10SD came from the factory with a 2,200 pound Dexter EZ Lube axle. With this in mind, the Dexter E-Z Lube Trailer Hub and Drum Assembly # 8-173-16UC3-EZ is the correct hub and drum for the trailer. It features the 4 on 4 inch bolt pattern you are needing along with the E-Z Lube grease cap with plug and seal to allow for easy bearing maintenance. Since you will be changing out the...
    view full answer...
  • Replacement Brake Drum for a 1998 StarCraft 2408 Pop Up Trailer
    When trying to find the correct drum brakes, a measurement of the inside drum diameter and the depth of the drum will be needed. See attached picture. The drum that you referenced, # 8-173-16UC3, measures 7 inches in diameter and 1-3/4 inches deep. Also this drum will have a 4 on 4 bolt pattern. If your drum has this measurement and your current shoes measures 1-1/4 inches wide, then this will be the correct part and work it well for your pop up camper. I have also attached an...
    view full answer...
    Image 1 for
  • Selecting Electric Drum Brakes for 1998 Fleetwood Coleman Pop-Up Camper Trailer
    Since your camper's axle already has brake mounting flanges on it selecting brakes just means confirming the axle weight rating and the mounting bolt pattern on the brake flanges. Most of the 1998 Coleman pop-up campers have dry weights close to or a bit higher than 2000-lbs so there is a good chance your axle rating is 3500-lbs. You can check the axle's identification sticker or plate to make sure so that your chosen brakes have the appropriate stopping power. You can also check with Fleetwood...
    view full answer...
  • Can Electric Trailer Brakes be Added to a Harbor Freight Kit Trailer
    Neither of those Harbor Freight trailers has brake mounting flanges on the spindles. To add electric brakes you would have to have brake mounting flanges welded on. This is a precision job that requires a special jig and someone with experience in welding on flanges. I have included a link to the flanges we carry to the right. You would also need to replace the idler hubs on the trailer(s) with hub and drum assemblies. The problem with that is the Harbor Freight trailers use uncommon...
    view full answer...
  • Availability of Trailer Hub with 4 on 5 inch Bolt Pattern
    If you do indeed have a 4 on 5 inch bolt pattern we have one hub that matches that. For that you would need the part # AH15450ECOMP. There is a better chance that you have a 4 on 4 inch bolt pattern as that is the most common 4 bolt mounting pattern. I attached a help article on determining bolt patterns as well. You should also note that when picking out a hub for an axle you have to make sure you pick one that will fit the spindle. To do this you need to measure the spindle where...
    view full answer...
    Image 1 for
  • Adding a Brake Axle to a 48 Inch Wide Home Made Travel Trailer on Harbor Freight Frame
    What you could do is use an axleless system # A35RS545E which comes with everything except a brake controller. The only issue is that you would need to also replace the tires and wheels with something like # AS13B45SMQ since the kit has a 5 bolt pattern and your trailer has a 4 on 4 pattern. We don't have a straight axle with the proper spring hanger spacing for the trailer. But you could potentially use # T20BTR-6048 and have a professional welded cut off the spring seats and weld on...
    view full answer...
    Image 1 for
  • Recommended Lug Nut Torque Specs for Trailer Hub and Drum Assembly
    When installing the lug nuts on the Trailer Hub and Drum Assembly # 8-173-16UC3-EZ you should follow lug nut torque specs and not lug bolt torque specs. For this assembly you will want to torque the lug nuts between 75 and 85 foot lbs according to the attached spec sheet. You will also want to use the Dexter Electric Trailer Brake Assembly - 7" - Left Hand # 23-47 and Right Hand # 23-48. Along with these, I recommend the Epicord 7-Way Molded Trailer Plug with Junction Box # E99011...
    view full answer...
    Image 1 for
  • Replacement Axle for Harbor Freight Trailer
    In order to find a replacement axle for your Harbor Freight trailer you will need to take some measurements to determine the correct axle length. The most important measurement is the distance from hub face to hub face. Additionally, you can measure the spring center distance. When replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and these measurements. If you...
    view full answer...
    Image 1 for
  • Parts Needed to Add Electric Drum Brakes to a 2004 Viking Epic Model M2007
    First and foremost, thank you for your service to our country. It is greatly appreciated. Ultimately you are correct that the most accurate way to determine the correct hub and drum assembly is to pull the hub and find the bearing and grease seal numbers or at least use a digital caliper # 301-17068 to measure the spindle where they sit. However, there are a few pieces of info that we can possibly piece together to make an educated guess as to what you have. We do have the Dexter...
    view full answer...
  • 7 inch Trailer Hub and Drum with 4 Lug Bolt Pattern and Brake Assemblies
    For a 4 lug hub/drum that has a 7 inch diameter drum we have the 2,200 lb axle hub/drum # 8-173-16UC3-EZ and then for a matching brake assemblies you'd want # 23-47 and # 23-48.
    view full answer...
  • Diameter Of Hub On Trailer Hub And Drums With 4 On 4 Bolt Pattern
    I went to the warehouse and measured the hub on both the # 8-173-16UC3-EZ and the # 8-276-5 hub. The outside hub measurement for the 8-173-16UC3-EZ is 2.47-inches. The outside diameter of the hub for the # 8-276-5 hub measures 2.06 inches. Both of these hub assemblies have a 4 on 4-inch bolt pattern so I have attached a link to the tire/wheel combos with 4 on 4 bolt patterns you can check out.
    view full answer...
  • Recommended Electric Brakes and Drums for Tow Dolly with 4 on 4 Inch Wheel Bolt Pattern
    For 14 inch wheels with 4 on 4 inch bolt pattern, I recommend the Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4 # 8-173-16UC3-EZ along with the Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # 23-47-48. You will need to make sure your axle has a brake flange like # 4-34 and make sure the bearing inner diameter of 1.063 inches matches your axle spindles. If your axle is long enough, then this will work well. The...
    view full answer...
  • Converting Brakes of 1994 Jayco Eagle to Electric Drum
    Replacing the hub/drums on your trailer will not change the length of the axle at all. Thankfully the hub manufacturers we carry all have the same overall length for the hubs so there's no need to worry about that. The hub/drum part # 8-173-16UC3-EZ would work great on your spindle as long as it has a diameter of 1.063 inch where the bearings ride. The brake assemblies part # 23-47-48 would fit this as well. A great way to upgrade your trailer to a 7-way would be with the 7-way upgrade...
    view full answer...
  • Compatible 2,200 lb E-Z Lube Axle, Hub and Drum and Electric Brakes
    The 2,200 lb capacity Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-6048 is not compatible with the hub and brakes you referenced, so it will require a couple of different parts, though you can use Brake Mounting Flange # 4-34. The axle has BTR spindles so you would need Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles # 8-173-16UC3-EZ which are compatible with 7" x 1-1/4" brake assemblies. For that you will need the Dexter Electric Trailer Brake Kit...
    view full answer...
  • Can Electric Brakes Be Added to Dexter 2,200lb Capacity Idler Axle
    Brake mounting flanges like part # 4-34 could be welded to the axle you referenced. The spindles are compatible with the L44649 wheel bearings. If you needed a hub with a 4 on 4 bolt pattern, use the # 8-173-16UC3-EZ hub drum and the # 23-47 and # 23-48 brake assemblies. You'd also need 4 nuts # 6-17 and # 5-8 lock washers per brake assembly. If you needed a 5 on 4-1/2 bolt pattern, go with the # 8-257-5UC3-EZ hub drum along with the brake assemblies and hardware mentioned above.
    view full answer...
  • Dexter Torflex #9 1000-2200 lbs Axle Hub and Bearing Kit Replacements
    The current hub for your Torflex #9 axle uses the inner and outer bearings # L44649 with a grease seal that has a 1.500" inner diameter. You can find the bearing kit as part # BK1-150 on our site. For a replacement hub we have the part # 8-91-05UC1 for a standard spindle or part # 8-91-05UC1-EZ for E-Z Lube spindles. If you have brakes then you would want part # 8-173-16UC3 for a standard spindle or part # 8-173-16UC3-EZ for E-Z Lube spindles. All of these hub kits come with bearings...
    view full answer...
  • Brake Drum for a Reliable 2,700 Pound Trailer Axle
    If the spindles on your Reliable 2,700 pound axle are straight (same diameter in both bearing locations) then that indicates that it uses L44649 inner and outer bearings but if the spindles are tapered (inner bearing surface diameter is larger than the outer bearing surface diameter) then it will use L68111 for the inner bearing and L44649 for the outer. If you pull a hub off and find that both bearings are L44649 you can use # AKHD-545-2-EZ-2K if there are grease fittings at the ends...
    view full answer...
  • Electric Brake Assemblies and Hub and Drum for Snowmobile Trailer with 7x1-1/4 Inch Brakes
    For Dexter 7 x 1-1/4 inch electric trailer brakes you will use # 23-47 for the drivers side and # 23-48 for a passenger side assembly. For a hub and drum assembly, you may need # 8-173-16UC3-EZ. This has a 4 on 4 bolt pattern and is designed for use with the brakes listed above. It takes inner and outer bearing L44649 and a 10-60 grease seal (included). If the bearing numbers or wheel bolt pattern is different on your existing hub/drums let me know and I can determine if there is...
    view full answer...
  • How To Determine Axle Capacity of Trailer with 4 Lug Hubs with Brakes
    The only way to know for sure is to check your bearings. That being said, the most common 4-bolt configuration is a 4 on 4 bolt pattern, which are typically found on 2,000 lb to 2,700 lb trailer axles. The only 4 on 4 bolt pattern hub and drum assemblies we carry are for 2,200 lb axles and use # L44649 inner/outer bearings. See below. Compatible with 7 inch x 1-1/4 inch electric and hydraulic brakes # 8-173-16UC3 - Includes bearings, races, grease seal, standard grease cap and lug nuts. #...
    view full answer...
    Image 1 for Image 2 for
  • How To Add Brakes to a 2006 Coachman Clipper Pop-up Camper
    Yes, the Electric Trailer Brake Kit part # AKEBRK-2 and the Dexter Trailer Hub and Drum Assembly part # 8-173-16UC3-EZ are correct for your pop-up camper based on the information that you provided. The braking assemblies do not come with the lock nuts and washers so you can obtain these using the Mounting Hardware Kit part # BRKH7. In order to complete your setup you will also want to use the Trailer Wiring 7-Way Upgrade Kit part # e99011. The main difference between the Curt Reflex...
    view full answer...
  • Can You Add Trailer Brakes To A Trailer With 2200lb Axles
    Absolutely! If your auto-flex 2200 lb axle does not already have a 4-bolt brake mounting flange you would need to add one. Assuming that your axle is 1-3/4" diameter you would need the # 4-34. The brake mounting flange will need to be welded on by a professional as it needs to be welded perfectly square to the axle or you may experience abnormal tire wear or other braking issues. Next you will need to confirm the inner and outer bearings your current hubs use. You can do this by removing...
    view full answer...
    Image 1 for Image 2 for
  • 4-on-4 Bolt Pattern Hub/Drum for Use on 2K-Rated Axle
    Matching up new hub/drum assemblies to your Dexter P-11 axle just requires matching up the bearings used in the original hubs and confirming the axle weight rating. New hubs have to use the same bearings in order to fit on your spindles and your new pair of hubs need to be rated for the capacity of your axle. Usually a plate or sticker on the axle itself (or the trailer) will tell you this. I see that you selected 7-inch brake assemblies for a 2K axle. For 4-bolt hub/drums you can use...
    view full answer...
  • 2,200 lb Axle Measuring 72 Inches Between Hub Face, Brake Flange, Hub, and Electric Brakes
    We do have all the parts you need, though the axles with that size don't come with the brake flange mounted, so you will need to have them welded on. Also, there isn't a hub with a 5 on 4-1/2" bolt pattern that will fit this spindle though, only a 4 on 4" bolt pattern. So for the 2,200 lb axle that measures 72" hub face to hub face & spring seat to spring seat, brake mounting flange, hubs, and electric brakes, these are the exact parts you need. - Dexter Trailer Idler Axle Beam with...
    view full answer...
  • Recommended Replacement Brake Assemblies for Viking 2107 ST Pop-Up Camper
    The American-Made Dexter # K23-103-104-00 brake assemblies would be absolutely the correct application for your Viking Pop-Up. The brake assemblies are compatible with 12 inch wheels used by your 145R80 tires. The installation is pretty easy if you're moderately handy. The video I've linked for you will provide an overview of what's involved. The video shows a larger brake assembly being installed, but the procedure for a 7 inch assembly would be pretty similar. Really the only difference...
    view full answer...
  • 7 inch Trailer Brake Assembly Recommendation for Trailer with Parking Brakes
    The 7 inch brake assemblies part # K23-103-00 and # K23-104-00 are parking brake compatible. For hub/drums that fit these assemblies you would then want the part # 8-173-16UC3-EZ. These are designed for 2,200 lb axle spindles.
    view full answer...
  • Replacement Brake Assemblies and Hub/Drums for 2,200 lb Trailer Axle
    For a 2,200 lb axle the correct brake drums would be the # 8-173-16UC3-EZ for a 4 lug hub. For brake assemblies you'd need the part # 23-47 for the left hand side and part # 23-48 for the right hand side.
    view full answer...
  • Electric Brake Kit For Two 2,200 lb Axles On Aluma Trailer
    Since you have two 2,200 lb trailer brakes you should get two of the Dexter Electric Trailer Brake Kits # K23-103-104-00. These are good for 10", 12" and 13" wheels. This kit requires a mounting flange bolt pattern of 4" x 4" and are 7 x 1-1/4 drum brakes. A 4" x 4" E-Z Lube Axle # 8-173-16UC3-EZ or standard axle hub # 8-173-16UC3 will work but make sure that your hubs use the # L44649 inner and outer bearing to make sure these hubs are correct for your Aluma Trailer. All the hardware is...
    view full answer...
  • Adding Brakes to a 2015 Jayco Jay Sport 8SD
    If you want parking brakes for your 2015 Jayco Jay Sport 8SD then you do want to go with the Dexter Electric Trailer Brake Kit # K23-103-104-00. Parking brakes aren't required so if you would rather use standard brakes then you can use the part # 23-47-48 that you referenced instead. If your spindles don't already have the brake mounting flanges then you need those, like part # 4-34, as well. Please note that if you haven't had brakes on your trailer yet then you also need hub and drum...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.