Dexter Trailer Hub - Grease - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
(6 reviews)
Price: $197.81
In Stock
Dexter Trailer Hub - Grease - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
Item # 008-399-92
Retail:$539.99
Our Price: $197.81
You Save: $342.18
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Videos (1)
- Photos
Dexter Trailer Hubs and Drums - 008-399-92
- 8 on 6-1/2 Inch
- For 8000 lbs Axles
- Hub
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- EZ Lube
- 5/8 Inch Stud
- 02475
- 25580
- Dexter
Hub assembly is designed for use with disc brakes on an 8,000-lb E-Z Lube axle. E-coat finish protects against corrosion. Cast iron construction ensures durability. Inner bearing (25580), outer bearing (02475), races, seal, and cap included.
Features:
- Trailer hub is designed to work with 8,000-lb disc brakes
- Cast iron construction provides strength and durability
- E-coat finish protects against corrosion and wear
- Grease cap features removable plug for easy access to grease zerk on an E-Z Lube axle
- Bearings, races, grease seal, and E-Z Lube grease cap included
- Made in the USA
Specs:
- Fits:
- Axle capacity: 8,000 lbs
- Wheel size: 16", 16-1/2", and 17"
- Bolt pattern: 8 on 6-1/2"
- Wheel bolt diameter: 5/8"
- Pilot diameter: 4-3/4"
Bearing, Race, Seal, and Cap Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 02475 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 02420
- Grease seal (included): GS-2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
008-399-92 Dexter Axle 12-1/4" Trailer Hub - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
Video of Dexter Trailer Hub - Grease - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dexter Axle Trailer Hubs and Drums - Hub - 008-399-92 Review
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Dexter Trailer Hub - Grease - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs - 008-399-92
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Hub assembly is designed for use with disc brakes on an 8,000-lb E-Z Lube axle. E-coat finish protects against corrosion. Cast iron construction ensures durability. Inner bearing (25580), outer bearing (02475), races, seal, and cap included.by: Robert 10/25/2023
Good product great price
by: S. Jameson12/26/2019
I put the hydraulic disc brakes on 2 of my trailers( 8000 lb, spring and 8000 lb. rubber ride). They stop 100% better now than they did with drum brakes. I had to fabricate my own spindle flanges on 2 of the axels to make the disc brakes fit correctly, the stock Axel flanges were off by 3/8" which didn't line up with the rotors. But once we worked out the variables the brakes were great, have worked perfectly. You can count on stopping in time now.
Will never use an electric drum brake again.
by: Samuel 11/25/2023
by: Perry 10/31/2023
Good job
by: Randy 07/31/2023
by: Yusef10/18/2022
6
6
See what our Experts say about this Dexter Trailer Hubs and Drums
- Can Dexter Trailer Hub # 008-399-92 Fit Hub Centric WheelsWhat's the pilot diameter of your wheel and does it normally attach with lug bolts or lug nuts?
view full answer...
- 8k Dexter Trailer Hub with 5/8 inch Wheel StudsWe have the Dexter Trailer Hub part # 008-399-92 which is an 8k hub with 5/8 inch diameter wheel studs.
view full answer... - Dexter 8,000 Pound Axle Idler Hubs with 5/8 Studs for Kodiak Disc Brake Kit K2R858DDIf your current hubs use grease and are not oil bath then you will need idler hub # 008-399-92 to go with slip-on rotor # K71-635-2. But if it is an oil bath set up you will need # 008-399-93. In either case the hubs have the 8 on 6-1/2 bolt circle, 5/8 inch studs, are fit Dexter 8,000 pound axles.
view full answer... - Can You Mix and Match Dexter and Kodiak Disc Brake Parts for a 8,000 Lb AxleI do have an option for you but mixing and matching different idler hubs, rotors, and disc brake calipers can be a hassle as they are not always compatible. This is why I recommend going with a complete kit with parts all from the same manufacturer like the Kodiak Disc Brake Kit part # K2HR89DE. This kit has a one piece hub and rotor design which I like best because they are easier to install and minimize the risk of warping the rotor. There is a benefit to two piece in that you can change...
view full answer... - Will An 8,000lb Dexter Hub Fit A # 42 SpindleThe 42 spindle takes a 5,200 lb hub like part # AKHD-655-6-EZ-K and uses bearings # 25580 and typically # 15123. The hub kits do not include the spindle washer, lock nut, or stud nuts as those come with the spindle. Included are video resources for additional information.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.