bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 6 on 5-1/2 Inch
  4. For 5200 lbs Axles
  5. Hub
Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2

Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2

Item # 008-213-9B
lowest price pledge
Our Price: $90.73
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 14 lbs
In Stock
Trailer Hubs and Drums 008-213-9B - For 5200 lbs Axles - Dexter Axle
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2 part number 008-213-9B can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 008-213-9B

  • 6 on 5-1/2 Inch
  • For 5200 lbs Axles
  • Hub
  • Dexter Axle

Hub is designed for use on trailer idler axles. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
  • Sturdy iron construction
  • Hub and drum are made in the USA


  • Application: 5,200-lb trailer axles
  • Wheel size: 14" to 16-1/2"
  • Bolt pattern: 6 on 5-1/2"
  • Wheel studs: 1/2" diameter x 2" long
  • Grease cap flange diameter: 2.45"
  • Weight capacity: 3,000 lbs

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.750" inner diameter)
    • Outer bearing: LM67048 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: LM67010
  • Grease seal (included): RG06-070
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

008-213-9B Dexter Trailer Idler Hub Assembly for 5.2K Axles with Hardware - 6 on 5-1/2

Replaces 8-213-5UC1

Video of Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of Dexter Axle Trailer Hubs and Drums - Idler Hub Kit for 5,200 Lb Trailer Axles - 008-213-9B

Michael: Hi there, I'm Michael with Today we're going to take a quick look at this Dexter trailer idler hub assembly. This is going to provide a hub for your 5,200 pound idler axle on your trailer. This will provide not only the hub, but also all of the components that you see here that you'll need to get the hub installed and operating properly. The hub itself is a nice sturdy iron construction. It's got a weight capacity of 3000 pounds, so it's going to be more than enough for your 5,200 pound axle.

This is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust the in products that are made here in the US.This will work for your 14 inch to 16 and a half inch wheels. It's got a bolt pattern of six on five and a half, so there's six of these half inch diameter by two inch long studs, and they are five and a half inches from one to the other, center on center, so should work for your tires and wheels that have that kind of spacing for them. This is also going to include your inner and outer bearing. So your inner bearing is going to be this larger one. This is a 25580 inner bearing.

So if you look on here, you can see that number right up there at the top. So if you're replacing one, can look for that number, make sure that this is going to be the exact replacement that you're going to need. You'll want to make sure that you pack that with enough grease to keep everything well lubricated, and then you'll just insert that into your race there. And then you'll install your double lip grease seal to keep everything installed where you need it.Our outer bearing is going to be this LM67048 part number. It's got an inner diameter of an inch and a quarter, and that will install on this outer race here, work just fine for you.

Now that grease seal that I pointed out, that is going to be a double lip grease seal, so you can see on the black portion there, kind of a division there, and the spring on the back side allows you to have tension on that inner lip. This has an inner diameter of two, a quarter of an inch, and an outer diameter of about three and three eights of an inch, so it is going to work great. Get that all sealed up so that all your grease stays where it needs to be. We're also going to have our grease cap to put on the outside to seal everything up, and of course our six half inch 20 lug nuts that will allow us to connect our wheel to our hub here so that our trailer can work properly.So this is just going to be the one side of your trailer. If you're needing to replace both sides, you'll obviously need a second set, but everything that is listed here is going to work together to allow you to have your 5,200 pound idler axle operational again.

So that's going to complete our look for it today. Again, I'm Michael with, thanks for watching.


Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Trailer Hub that Can Fit Mobile Home Axle with Bearing Dimensions 1.25 1.75
    Typically mobile home axles don't have spindles that standard trailer hubs can fit but in your situation you could use the part # 008-213-9B which matches the dimensions you listed. This comes with bearings and seals as well.
    view full answer...
  • Replacement Trailer Axle with 86" Hub Face Measurement and 70" Spring Seat Measurement
    While we do have a closer option for you than the etrailer Axle # e65GR, the axle has a higher weight capacity than you need. That is the Dexter Axle Beam - 5,200 # 8327816. With this axle, if you want to use idler hubs, that is the # 008-213-9B. When using these 5,200 pound parts, I recommend checking with the trailer manufacturer to confirm whether the rest of your trailer can withstand 5,200 pounds of weight. If your trailer is constructed for less weight capacity, you will be limited...
    view full answer...
    Image 1 for
  • Recommended Axle To Replace 86-1/2" Long Dexter Mobile Home Axle
    I reached out to my contact at Dexter and based on the part number you provided you have an older mobile home axle that has an 86-1/2" hub face to hub face measurement, and 75-1/2" spring center to spring center measurement. They were unable to find the exact weight rating of the axle. Based on the hub face length you need for a replacement we have the Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long # e45GR which has a 5200lb axle rating which would be a great choice. The spring...
    view full answer...
  • Parts Needed To Replace Hydraulic Drum Brakes W/ Hydraulic Disc Brakes On Karavan Boat Trailer
    Since your spindle uses inner bearing # 25580 and outer bearing # LM67048 the Dexter Trailer Idler Hub for 5,200-lb Axles - 6 on 5-1/2" # 008-213-9B is going to be the correct replacement and includes new bearings, races, grease seal, and lug nuts. Now the Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs # K2R526DKG you mentioned will go over the idler hub and the included bracket will mount the caliper to the 5 bolt flange on your axle. Now...
    view full answer...
    Image 1 for Image 2 for Image 3 for

Do you have a question about this Trailer Hubs and Drum?

  • Why

    At we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Written by:
Mike S
Employee Michael B
Installed by:
Michael B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.