To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded Volvo XC90 Recharge trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling through vehicle frame required for installation , Requires temporary removal of bumper/fascia during installation , Heat shield must be modified or trimmed for hitch installation , Fascia trimming required
California residents: click here
Complete Towing Package for 2024 Volvo XC90 Recharge
Customers compare 76194 to these similar products
2024 Volvo XC90 Recharge Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular XC90 Recharge Trailer Hitch Accessories
It was a pleasure working with Joshua B and etrailer to get my new hitch receiver. The order was reasonably priced and came quickly. It was well packaged and had great instructions of how to install the receiver. (I did not install the hitch myself, but a friend installed it on my car.) There were no problems with getting the hitch and putting it on. I also ordered a pin alignment stop, but did not need it, so I plan to return this item. I would definitely order from etrailer again. Thank you for the great customer attention!
Quality materials good workman ship and performas as it should.
Brooke M.
3/13/2025
Looks awesome, Kasey! What do you use the hitch for? Anything fun?
etrailer was super fast shipping and great communication.
I bought a drawtite hitch for my 2025 Volvo XC90 (Same older body style). While we did make it work the 2025 does have a “lip” of metal that prevented the back of the hitch to sit flush against the frame. There was small gap so my husband tried to pry the metal downward so the hitch was sit flush. In the end we had to push really hard and he was able to drill in the bolts enough to force it flush.
Not e-Trailers fault but just know that it’s like that for the 2025. The hitch instructions showed pics and it was slightly different on the older year models.
We did not have to cut any of the heat shield. Even with that 1 hiccup we installed it in 1 hour and 10 minutes.
Today I had to drive up a very steep drive and scraped the bottom of the hitch…so be aware of that.
Brooke M.
6/16/2025
Looks great! I appreciate the details from your experience with the install process - definitely good to have this kind of information out there since the '25 Volvo XC90 is still so new. Glad you were able to get it done in the end! What ae you going to be carrying with the new hitch?
Great hitch and easy install. While a little concerned over the lack of bolt threads left after the hitch and bumper install, I'll trust the engineers that it won't rip off with a heavy load. The extra included bolts add some reassurance. The bumper cover has a couple molded in lines that let you know where to trim for clearance. Didn't check the clock but was definitely less than an hour to install with basic hand tools and no assistance. Much less expensive than factory original.
Gwendolyn Y.
6/8/2025
Install looks great, Anthony! What are you going to use the hitch for?
I have purchased and installed a few Draw-Tite hitches and have yet to be disappointed. Quality-made product. Everything you need to install is included. Easy to install.
This hitch was installed on a 2022 Volvo XC90 T6 Inscription. Hitch installation only required about one hour with a little bit of prep and clean-up time. For this specific vehicle, the heat shield only required a minor nip (and not as much as the instructions suggested), and the facia was already shaped to accommodate the hitch (maybe factory finished for a towing option?).
Two suggested additional steps to the installation that we have done with every hitch project: 1) Lightly sand and apply a bit of paint to the mounting surface after removing the bumper; it is usually bare metal and sometimes already starting to oxidize. 2) Apply a little bit of anti-seize to the fasteners for the bumper / hitch.
We are very satisfied with the hitch and the upgrade to our vehicle!
This worked perfect for my 2021 XC90 T8 recharge. I bought the wiring harness and trailer control module from Volvo and installed everything myself (had to have the dealership program the TCM). I took my time (~4 hours), the biggest issue was how to install the 7-pin connector. The final result works great to tow my vintage trailer!
2020 Volvo XC90 T8 Hybrid. Yes it fits. I’ve installed several of these and the holes need “convincing” with a rubber mallet against the bolts to fit. It’s frustration but a little creativity goes a long way. If the holes lines up without coaxing I’d give this 5 Stars. Tap the bolts with a 2x4 wood buffer and a rubber mallet until it goes into the hitch hole. At this point you may have damaged the thread on the bolts so take the nuts and tightening them all the way down to re-thread the bolt. Then take the bolts off and attached them metal bumper plate and attach the bolts again. Also, take your time taking the plastic trim pieces off. Putting them back on requires patience. Don’t use too much force. It’s the plastic tabs are in the right place, snapping them in does not take much effort. Good luck!
I purchased the hitch about a year ago and have been very happy I did. Installation was very straight forward on my 2024 XC90 and the instructions were excellent. I would certainly buy from trailer again!
Fit perfectly and very sturdy very happy with this purchase.
The bike rack fits very well
Only used a few times but overall the installation instructions and videos made the install super easy. Would absolutely use again.
Hitch is fine, packaging, not so much. Hitch blew through the box and has paint missing, won’t be able to install until next week.
Victoria H.
4/11/2025
This shouldn't have happened Erick. I'll get a paint credit sent to you right away
From the time I talked to Grace your inside sales person to the final bolt of the install everything went perfect. Installation instructions were fantastic.
Prompt delivery, great video instructions. Installation was about 1 hour with no issues.
Hole pattern was off, I had to drill out mounting plate. Bending the bumper support and heat shield was not just a simple task.
I was nervous about doing this install myself, but was pleasantly surprised with how easy it was! I watched the 10 min video 2 or 3 times then took the plunge. It only took about 1.5 hrs to complete, after running into a small snag with whether or not to re-install the 'bumper' (aka impact yada yada) back over the new hitch (it does, with this hitch, anyhow). We ended up having to call eTrailer to confirm, and the lady was quite helpful and patient with us while we asked our questions.
We watched the videos, taped off the quarters, easily removed everything, trimmed the heat shields and began the hitch install. We couldn't believe how easy the process was - only hiccup was the bending of the brackets for the rear bumper cover (T25 underneath). Once they were "re-adjusted" we finished the re-install of the cover!! Now, on to the wiring!! Thanks for the videos, they really help!! Only wish is that it was a bit more discrete...
Great product,, super fast shipping, pretty easy install. The hard part is getting trim started and off.
This is the second hitch I purchased from etrailer. Once again, the installation instructions and fit were excellent. I did have bit of trouble with flattening a bracket in order to get the hitch to lay flat. The instructions and video showed it cooperating, but mine had other ideas. It was several trial and errors to get the hitch mounted flat. I got quite good at installing and removing the rear fascia.
Hitch was installed and ready for use.
Fantastic hitch. Easier to install than I was expecting. Some very minor trimming of the plastic and heat shields. Watch the etrailer video and you can’t go wrong.
Will 
7/20/2022
Still great!
Hitch worked out OK. Needed to trim fascia more than was indicated in the instructions (notch at each side plate). Also, our XC60 has the sensor that opens/closes the tailgate if you move your foot below the drivers side rear bumper, which made fitting a bit more challenging. Instructions were pretty vague, so it helped to look at the install instructions for the factory hitch/wiring harness (google instructions 31454723 for part 31439424) for details of how to remove body components. Factory hitch definitely would have installed quicker, for a few more $$$.
Product looks great and easy to install with the step-by-step assistance of the video
Yesterday I installed this Drawtite hitch on my 2019 Volvo XC90. Dealer said it would be $1,600 and would require programming the cars computer to do the taillights.
We installed the hitch and taillight kit from etrailer yesterday. It took about 2 hrs. It was a perfect fit. It did not require dropping the muffler nor notching the heat shield. We did notch the bumper but Volvo already had the notch marked!
Light kit worked perfectly
Oh... ETrailer for hitch and light kit: about $ 1300 less than what the dealer quoted..,.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
4/18/2025
Joshua knows his stuff, that's for sure! I'm glad he could help you out on this. :) Thank you, Patricia!