The best technical support and full trailer hitch installation instructions. Lowest price Tundra trailer hitch guarantee and expert service. Toyota Tundra, 2008 trailer hitch by Draw-Tite are available from For expert service call 800-298-8924 to order your Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number 41935, or order online at
Select Vehicle:change vehicle
summer hauling headquarters

Price: $264.71

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # 41935

lowest price pledge


Our Price: $264.71

This item qualifies for free shipping


zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon

In Use/Installed

for 2013 Toyota Tundra 5Draw-Tite
for 2013 Toyota Tundra 1Draw-Tite
for 2013 Toyota Tundra 4Draw-Tite
for 2013 Toyota Tundra 8Draw-Tite
for 2013 Toyota Tundra 6Draw-Tite
for 2013 Toyota Tundra 3Draw-Tite
for 2013 Toyota Tundra 7Draw-Tite
for 2013 Toyota Tundra 11Draw-Tite
for 2013 Toyota Tundra 9Draw-Tite
for 2013 Toyota Tundra 2Draw-Tite
for 2013 Toyota Tundra 10Draw-Tite

  • Draw-Tite
  • 2 Inch Hitch
  • Class IV
  • 1200 lbs TW
  • 12000 lbs GTW
  • Visible Cross Tube
  • Custom Fit Hitch
  • 14000 lbs WD GTW
  • 1400 lbs WD TW

2008 Toyota Tundra - Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant Toyota Tundra trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 12,000 lbs
      • Maximum GTW when used with weight distribution: 14,000 lbs
    • Maximum tongue weight: 1,200 lbs
      • Maximum TW when used with weight distribution: 1,400 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41935 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame

41935 Installation InstructionsInstallation Details 41935 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
14,000 lbs.

Tongue Weight (TW):
1,400 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

Vehicle is factory equipped with a 4-pole wiring harness tucked behind the bumper towards the middle. No drilling required for installation , Fits all models without a factory installed hitch

Complete Towing Package for 2008 Toyota Tundra

Retail: $630.97

Package Price:$403.01

Related Products

2008 Tundra by Toyota Owners Who Purchased this Trailer Hitch Also Bought...

Popular Tundra Trailer Hitch Accessories

Video of Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.

Video Transcript for Trailer Hitch Installation - 2013 Toyota Tundra - Draw-Tite

Today on our 2013 Toyota Tundra well be installing the Drawtite Ultra frame hitch part #: 41935. This is what our hitch will look like once its installed. Next, well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is two inches. From the top of the receiver tube opening to the ground is 18 and a quarter inches. This will assist you with selecting accessories such as a ball mount, a bike rack or a cargo carrier.

Now lets go ahead with the installation. First well need to remove the angle brackets that are located on the inside of the frame rail near the bumper on both sides. To remove the brackets there are a total of four fasteners for each. Well go ahead and remove them now. Two 12 millimeter fasteners and two 14 millimeter fasteners.

Now well go ahead and set the brackets aside as they will not be reinstalled, however we will be reusing the hardware. Our forward attachment points will be here. On the fourteen millimeter bracket well take the bolt and itll go through the hitch, through the frame and then get secured with a flat washer, split-lock washer and nut. The 12 millimeter bolt will get a conical tooth washer and then reinstalled into the weld nut. For our forward attachment points well be using the new 14 millimeter bolt along with a split lock washer and two blocks.

One block will get sandwiched between the hitch and the frame. Note, each process we do on one side will get repeated identically on the opposite side. Now with all of our fasteners installed well go ahead and tighten them down. Next well torque to specifications as indicated in the instructions. Now, with our hitch secured and torqued to specifications thatll complete the install of the Drawtite Ultra frame hitch part #: 41935 on our 2013 Toyota Tundra..

Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41935

Average Customer Rating:  4.8 out of 5 stars   (4 Customer Reviews)

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.
- 41935

by: William01/26/2012

Pros: I had no trouble raising the hitch by myself using a motorcycle jack placed under the receiver. After determining I did not speak French or Spanish, the English version of the installation instructions was helpful. By all appearances, (without x raying the welds,) the hitch looks bullet-proof. Considering the size and weight of this thing, I'm amazed at how quickly the item was shipped and received at my humble abode. Cons: The paint is a bit soft. There were several small areas where paint had been chipped off or worn off the hitch. The reason for some of the missing paint was obvious; the plastic wrapping and clear tape surrounding the hitch had been worn off in a few locations. In other locations, the wrapping was intact over the areas containing missing paint. 30404

- 41935

by: Adam12/23/2010

Heavy Duty I decided to buy this hitch when my Curt Class III hitch bent as I was pulled out of a snowdrift. I have absolutely no doubts that this extremely heavy duty hitch will outlast the truck. I ordered this product on 12/21/10, it shipped on 12/21/10, and it was delivered on 12/23/10! gave me free expedited shipping and it was delivered exactly 50 hours after I ordered it! I will definately buy from again! 4516

- 41935

by: Kraig G.01/14/2013

I received the hitch just a couple of days after I placed my order with etrailer. These folks are REALLY good!!! Very helpful both with ordering the hitch and with follow-up questions. Would I recommend etrailer to my friends??.....Heck Yeah!!! 62927

- 41935

by: Excellent06/02/2017

Took me about 45 min to install and the fit was perfect Thank you etrailer Brian 387856


Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?

  • Trailer Hitch and Wiring Recommendation for a 2010 Toyota Tundra TRD SPORT
  • I spoke with my contact at Draw-Tite and he stated that hitch # 41935, fits all models of the 2010 Toyota Tundra, including the TRD Sport models, as long as it did not come with a factory trailer hitch. You could also use Curt trailer hitch # C15398. I have included links to the installation instructions for each for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin with clip, and a carrying bag....
    view full answer...

  • Mounting a Winch Plate and Front Mount Trailer Hitch on a 2007 Toyota Tundra 2WD
  • I spoke with my contact at Curt and he stated that the Curt Front Mount Trailer Hitch, # 31198, will not sit flush with the bumper on your 2007 Toyota Tundra 2WD, but about 2-3 inches back. We offer the Curt Electric Winch Mount Plate, # C31010, that has three pin holes that will allow you to adjust the distance of the winch plate from the vehicle. The measurement from the furthest pin hole to the mounting plate is 8-1/4 inches. I have attached a picture showing these measurements. This...
    view full answer...

  • Can Factory Trailer Hitch on a 2008 Toyota Tundra be Removed to Install a Draw-Tite Trailer Hitch
  • If the factory trailer hitch on your 2008 Toyota Tundra is bolted on then it could be removed and # 41935 installed in its place. But if the factory hitch is welded on, which is the case on some vehicles, then the Draw-Tite hitch will not fit. I have linked a video showing an example installation of this hitch for you. The factory hitch may be all you need depending on which version you have and what you want to tow. There is a Class III factory hitch rated for 5,000 pounds and a Class...
    view full answer...

  • Aftermarket Hitch for 2012 Toyota Tundra Rock Warrior TRD with Damaged Factory-Installed Hitch
  • We do offer a range of trailer hitch options for your 2012 Toyota Tundra Rock Warrior TRD. Since your factory-installed hitch has been damaged you'll naturally need to remove this entirely. After doing so I suggest you very carefully inspect the OEM hitch's attachment points on the frame rails to ensure no vehicle damage was sustained when the hitch was broken. I would also check that the threads in the frame's weld nuts (that accept the hitch installation bolts) were not damaged in...
    view full answer...

  • Comparing Draw-Tite and Curt Trailer Hitches for the 2013 Toyota Tundra
  • The Curt and Draw-Tite trailer hitches for yoru 2013 Toyota Tundra will be the same part numbers no matter which bumper type you have on your truck. Curt hitch # C15398 is actually a Class V hitch. There is no Draw-Tite Class V option but the Class IV is # 41935. The Curt hitch is rated much higher at 2,400 pounds tongue weight and 16,000 pounds gross trailer weight which likely exceeds the vehicle's capacities (conuslt owners manual for your trucks capacities). The Draw-Tite hitch...
    view full answer...

  • Ball Mount Recommendation for Draw Tite Hitch for 2007 Toyota Tundra
  • It sounds like maybe you are looking for just a ball mount to go along with a hitch that you have installed on your 2007 Toyota Tundra. The recommended ball mount to go along with the hitches that are sold for the 2007 Toyota Tundra is the Draw Tite part # 40330. This ball mount can do a rise of 1 inch and a drop of 2 inches. The best way to pick out a ball mount is to first determine how much rise or drop you would need to tow your trailer level. To see how this would be done check...
    view full answer...

  • Replacement Mounting Hardware for a Trailer Hitch on a 2013 Toyota Tundra
  • If you happen to know the brand and model of the hitch you can order replacement hardware to mount the hitch using # RHK. On the RHK page you would enter the hitch number and choose the manufacturer from the menu on the RHK page to get the proper hardware. The hardware from the old hitch should not be reused since it is designed to be torqued down only once. If the hitch is a factory Toyota hitch you will need to obtain the proper hardware from a Toyota dealer.
    view full answer...

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? Read our Returns Policy. Please note that we cannot exchange items. You can also cancel unshipped items. Contact our Customer Service team at 800-298-8924 to find out more about how to cancel your order.

Info for this part was:

Written by:
Lindsey S

Expert Research:
Michael H

Video by:
Joshua S

Test Fit:
Nicholas E

Updated by:
Laura H

Video Edited:
Dustin K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.