To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Toyota Tacoma's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling through vehicle frame required for installation , Hitch does not fit vehicles with a factory installed hitch
Complete Towing Package for 2022 Toyota Tacoma
Customers compare e98905 to these similar products
2022 Toyota Tacoma Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Tacoma Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (347 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.The rear hitch mounts are slightly wider and required considerable effort to get it in place. Also, two of the four rear mounting bolts are only accessible using a 19mm wrench but that isn’t mentioned in the directions and cannot be properly torqued using a ratchet style torque wrench. The build quality is excellent and heavy duty.
This hitch fit perfectly and the system for getting the bolts in place inside the hitch was brilliant.
Arrived in just a few days. Looks to be good quality. Haven’t installed the hitch yet.
Wow, super impressed with the bespoke design of this hitch. It comes with a wire to fish the bolts into the old bumper. And it worked! Great job!
Great product, installation guides, and price. Couldn't ask for more.
The video makes it look like it's going to be difficult to do. I had it installed in 15 minutes. The most frustrating part was the bolts in the tube but if you get the right angle it goes in smooth. Quality is great.
Easy to follow instructions and perfect fit made an easy install.
Also, quick response to missing items due to shipping issue (not etrailer's fault either.)A+++
I installed it and it was less than one hour of time to install it.
Very happy with my purchase.
I can’t even get carriage bolt down to the little hole. But the hitch will fit the frame rail.
The video provided for the installation was helpful. The person doing the install was having difficulty getting the bolts to drop through with the fish wire. The clearance is just to tight for that washer/bolt combo, after failing to get the bolts through I smoothed the edges of the square hole in the washer and was able to finally get them to drop through.
i received the hitch receiver now ill just wait for my son to bring his tacoma so we can install it
Excellent product fast shipping and great communication always know where my item was! And perfect fit in my truck
Etrailer have the best customer service experience and great quality of the products
Great hitch. Well made!
After unboxing, I noticed an area where the matte black paint was rubbed off down to the base metal of the hitch. I cleaned this area and used black, metal rust proof spray paint and corrected it. The finished product is unnoticeable but more importantly, it won’t rust.
I’m going to paint the 2 bolts going into bumper black. It’ll give a cleaner look to the install.
Great product and I’m very satisfied with my purchase!
Great product fit perfectly
Shipped faster than others and fit perfectly. It has to be pushed/pulled in between 2 vertical frame pieces (a tight/snug fit), so I couldn't do it alone without a jack -- used my neighbor instead and the 2 of us had no trouble bumping it into place.
This was an easy install. Watch the video. The trick for snaking the hitch bolts is key. That was the most time consuming part. I was able to complete the by myself, it would have been really easy with a second person and a lift but I improvised with a couple milk creates and clamps.
This is my second receiver for a 2021 Tacoma from etrailer. Excellent quality and fit twice. The first Tacoma was a lease and I left it on the truck never thinking of purchasing a used 2021 Tacoma, the reason I purchased a second receiver. The two bolts you need to feed into the frame can be interesting, first went well second one not so easy.
It fit exactly and it is what we ordere d.
Me and my son installed this hitch in 15 min super easy
I was impressed with how durable the hitch is! Shipping was quick also.
You may need some help attaching this to your vehicle. It was not clear-cut.
Scott
7/7/2024
Its been working fine, it was a good purchase!
Perfect fit and I installed it within an hour. Snaking the carriage bolts through the frame was a small challenge but patience pays off.
Like that the receiver part of the hitch is supported to the frame, my last Tacoma the receiver did not have this extra support. More heavy duty then the picture appears. Very pleased with purchase.
A good fit and easy to install
Fit perfect
The key to getting the fish bolts through the holes in the bumper, is to work the flat bolt retainer up at angle with a screwdriver through the hole it is going in as you pull the bolt through it. I spent an hour with retainer laying over hole and trying to get bolt to stand up and drop through. That won't work. Watch the video right before you attempt this and do it exactly like the guy in the video. You will definitely need a dead blow hammer. The hitch fits tight but I kept jack stands under it as I adjusted it to bolt it to the frame.
Was able to install it myself without much trouble fishing the bolts through was tricky was going to give up but watched the video and had to tilt the spacer just so great price
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Daniel
7/2/2024
Still couldnt be happier with the hitch. No problems a year out!