bing tracking image
  1. Trailer Hitch
  2. Toyota
  3. Prius
  4. 2011
  5. Draw-Tite
FITS 2011 Toyota Prius
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

lowest price pledge
Retail:$259.39
Our Price: $140.20
You Save: $119.19
Trailer Hitch
Confirmed to Fit
2011 Toyota Prius

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 19 lbs
Quantity: 
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Class I 24847
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-496-5010 for expert service. We are your Toyota trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Draw-Tite products for your Toyota Prius 2011. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part 24847 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (672)
  • Q & A (0)
  • Photos
  • Why etrailer?

2011 Toyota Prius - Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

  • Class I
  • 1-1/4 Inch Hitch
  • 2000
  • Draw-Tite
  • Visible Cross Tube
  • 200
  • Custom Fit Hitch

This fully welded, corrosion-resistant Toyota Prius trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24847 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60263 Hidden Hitch Class 1 Trailer Hitch Receiver

Item # 24847

Installation Details 24847 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Hitch is not compatible with plug-in models. No drilling required for installation , Exhaust must be temporarily lowered for installation




California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24847

Average Customer Rating:  4.9 out of 5 stars   (672 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
Toyota

Order arrived as specified, and was exactly as described! I am very impressed with how well designed and constructed to be an "exact fit" for our 2015 Toyota Prius! I ran into some difficulty and wound up removing the rear bumper skin to install 2 nuts inside the frame of the vehicle because the vehicle had been in an accident, and apparently the body shop facility that repaired the car (prior to our ownership) neglected to replace the weldnuts!
It was still an easy install, just required a little more time, and effort due to no fault of ETrailer or the manufacturer of the hitch.
The wiring harness setup that ordered greatly simplified the light hookups, and was great quality! Exactly as described!
I would definitely order again, and I highly recommend ETrailer, and their products!




by:
2010 ToyotaPrius

The unit arrived promptly, was well packed, and was a snap to install, but I wouldn't attempt this without a vehicle lift. We had to bend the sheet metal that's above the exhaust just a little bit so the bracket holes would align. Otherwise, a perfect fit. Done in 20 minutes.




by:
2015 ToyotaPrius

We have a 2014 PriusV and needed a trailer hitch for towing a 15 foot sailboat we recently bought. Problem was, Toyota recommends not towing with the PriusV. An Internet search revealed there were a few companies that had light weight hitches available specifically designed for the Prius models. After reading reviews, we decided on etrailers.com due to hitch design, hitch accessories (i.e., draw bar and wiring), price, free shipping, and supposedly easy installation in 30 minutes.

I called etrailer.com to ask a question and the agent told me that if I ordered the hitch package I needed at the time of my call (Monday) I would have the parts in hand by Friday so I placed my order. Parts arrived as expected.

What a pleasant surprise, product quality surpassed my expectations! Being a technical person I found all the directions remarkably well written with excellent supporting drawings and photos. I installed the hitch by myself in roughly 15 minutes. Installing the wiring took a little more time due more disassembly of panels to channel wiring as well as some simple assembly needed on wiring. The entire process took less than an hour and looks professionally installed.

I'm very happy with the overall experience and highly recommend etrailer.com for all your hitch needs.


Comments
Very pleased with product. Speciality trailer hitch for 2014 PriusV. I continue to recommend etrailer.com to others as opportunity presents itself. Thank you for the customer followup. There are very many companies out there that should the etrailer.com customer service policy.
John K - 01/25/2019


by:
2012 ToyotaPrius

My son-in-law and I installed this hitch on a 2012 Toyota Prius V. The video for the install on a Prius is accurate for a Prius V with the exception that a Prius V does not have cosmetic cowling on the underbody that has to be removed. The install was straightforward and we had the hitch on in about 45 minutes.

Other than the receiver on the hitch, you can't see the hitch without bending down and looking under the bumper. I personally like the aesthetics. We're using the hitch with the Swagman XTC-2 bike carrier and the combination is ideal for transporting our two bicycles.

The fit between the hitch and bike carrier is tight and the Swagman allows us to drop the middle bar down for access to open the rear hatch of the vehicle when the bikes are not in the carrier but leaving the bike carrier attached. We bought the Prius V so we could carry passengers, gear and two bicycles on trips. The draw-tite hitch and Swagman XTC-2 give us the flexibility to do that.

Here's some pictures to demonstrate as I've had a difficult time finding photos on the web showing a Prius V with hitch and bicycle carrier installed. I have a cover on the hitch receiver in some photos, sorry I took the photos at night with a flash, but hey, I did the review! Good luck.

Oh, by the way, like others have written, E Trailer was on top of things from the get go and I received numerous e-mails about the status of my order and follow-up after my receipt. Only took three business days between the date of my order and delivery to my home. The hitch and bike carrier were boxed and then inserted into another heavy duty shipping box. There were a few small tears in the outer box (assume from rough handling by the delivery carrier) but the contents were not damaged in any way. I would definitely order again from etrailer.com.


Comments
I just bought the V and your great pictures have made up my mind. Thanks!
-- comment by: Brian s - 12/07/2012



by:
ToyotaPrius

This is a great addition to our Prius V, We have a bike rack and a cargo platform. Putting cargo on the back instead of the roof does not cut down our gas mileage on long trips noticeably. I recommend this hitch to everyone.




by:

loved the ease of installation. Im 67 yr old small female, I tried putting it on myself, you really need an person holding it while you install. it took about 30 minutes in all removing the old tie downs and screws and installing this. It is very sturdy and works perfectly with a bike rack I purchased as well.




by:
2012 ToyotaPrius

etrailer did a fine job as expected. Hitch came very well packed with additional cardboard holding it securely in the box. They also taped the bike rack hitch lock I ordered with it securely to the hitch so it wouldn't fly around in the box.
The DrawTite hitch was an easy 20 minute install with 4 bolts. The Prius V doesn't have the protective bottom cover like the normal Prius does which makes it much easier to access the existing bolts. And since there were 4 existing bolts in place in the frame of my 2012 Prius V (for the muffler hanger and tow hook), I didn't have to deal with any rusty in-frame nuts. Hitch fit perfectly and seems plenty sturdy. I did have to do a little flat filing to the inside of the hitch (see photo) where the large hole on one side had a burr that kept the bike rack tongue from sliding in easily.




by:

This unit installed easily with one person and using car ramps. You may be able to do it without lifting the car but it requires an angled approach through the underbody (which you TOTALLY leave in place) to align that is aided by having the car higher up in the air. It looks good and is solidly installed with the four, welded nuts on the frame from the factory. A very good design and great power coating! Etrailer shipped this unit quickly and all was accomplished with relative ease.




by:

The hitch receiver bolted on relatively easily; took about 30 minutes. The fit is excellent.




by:
ToyotaPrius

The hitch is an excellent fit and the quality of the is outstanding. I did the installation myself in the driveway. Since the Prius is low to the ground it would be easier if the vehicle is raised, but it is not necessary. I tried using 1/2" drive sockets but they don't fit the tight driver side bolts, so I used 3/8" drive set. I had a little problem with the passenger side as you will see in the photo. The heat shield for the muffler was causing me to not seat the hitch properly. Once I realized this and bent the shield out of the way a little everything when together easily. When I need a hitch for my truck I will use e-trailer again. Your instructions don't mention reinstalling the tow point so I didn't. Is this not possible?


Comments
That is correct, the tie-down hook cannot be reinstalled. Check Step 1 again in the instructions.
-- Etrailer Expert Patrick B - 08/27/2015


by:

This product arrived quickly (as always with etrailer) and without damage. It was professionally installed without any problems that I was made aware of. it hold two bikes ~30-40 lbs. just fine.




by:
2010 ToyotaPrius

Quick delivery and easy install. I bought this hitch to enable carrying of my bike on my 2010 Prius. I’m 71 and the installation was pretty easy. Here are a few pointers to keep in mind if you want to do a DIY install. 1 - the instructions say to use 17mm and 19mm sockets, however, 11/16 and 3/4 will work in a pinch. 2 - as others, on this forum, have mentioned align and install the hitch using the original factory bolts (makes things much easier). Once everything is aligned and snugged up tightly, remove one bolt at a time and replace with the supplied bolts (these are much harder to get started). 3 - use a long extension, it makes getting the bolts started much easier. 4 - move the muffler out the way with a piece of 2x4.




by:
2010 ToyotaPrius

Drawtite 24847 on 2010 Prius. Just had the hitch installed today. Thanks for the videos and the email follow up! The installer was very happy that the job was just as you described it!

Here are a few pictures:




by:
2014 ToyotaPrius

Rock solid and pretty easy install with the right tools. Had to modify muffler shield a little bit on the 2014 prius V because the hitch was not going to seat up flush against the frame of the car. Nothing a nice pair of sheers couldnt handle.

Delivery was super fast. Also the contact from customer service and response to a question I had was impressive.

Zero issues with the entire process and I am impressed with the hitch.




by:

Great little trailer hitch. Easy one man installation. One year later and no rust yet. Still hauls great.




by:
2015 ToyotaPrius

The hitches easy to install after watching an Etrailer video on Youtube.




by:

Hitch arrived on time , and was very well constructed. I had watched the video of the installation and was impressed with the ease of insulation and strength of the hitch . I am using it for a bike rack to haul our bikes to the beach . I am 75 years young and cannot impress enough the Quality of this product.


Comments
easy to install could not be any happier with this product !
Steve D - 08/12/2015


by:
2011ToyotaPrius

The receiver fits perfectly on my 2011 Toyota Prius. I was able to get the work done on my own, but it would be definitely easier with a second set of hands. Directions were very straight forward.




by:
2012 ToyotaPrius

I bought this for my 2012 Prius V based on other user's reviews. I was able to install it by myself without a lift or jacking up the car. I had most of the tools I needed, but I did pickup a longer extension for my socket set. Watch the install video and you will see why that's needed.

I used two jack stands to support the receiver while I installed it.

The only issue I had was with the new bolts. The existing bolts have rounded ends and are each to get started in the frame. The replacement bolts have a squared off end and are difficult to start without feeling like you are cross threading the bolt.

I finally installed the receiver using the existing bolts, then replaced them one at a time with the new bolts. That helped. I was able to get the bolts started without trying to hold the receiver in place. Fiddling around with the bolts added at least 20 minutes to the install time.

Now that it's on I'm happy with it. I'm using it with a Swagman XTC2 bike rack. I've been on the interstate several times and the combo is very stable.

Delivery from etrailer was fast. The product was packed well for shipping. I'm a first-time customer and would come back to etrailer again.




by:
2011ToyotaPrius

Great product and fast shipping - Installed with a friend and basic tools in about 25 minutes. My use for this hitch is to mount a bike rack (1up USA) and this hitch has been perfect. Saved a lot of cash ordering and installing myself!
- 2011 Prius




by:
2013 ToyotaPrius

My order for the Draw-Tite Receiver Hitch (for 2013 Toyota Prius) was delivered in good condition, and in just a few days. Installation was relatively easy following the enclosed instructions, e-trailer's video, and a number of reviews. The two best tips I gleaned from other reviews about installation were: 1.) Don't bother to remove the muffler from the hanger, rather just "tweak" it over to R & R the bolts. (I jammed a block of wood between the undercarriage and the muffler to keep it "tweaked" out of the way.) 2.) Re-install the factory bolts to temporarily mount the hitch. Because the factory bolts are tapered, it greatly eases alignment (don't snug any of them up, just run them in far enough to ensure support of the hitch.) Replace them one at a time with the (19 mm head) bolts provided with the hitch.

The purpose for getting a receiver hitch was to get a proper bike rack to haul our two bicycles, so I ordered the Swagman XTC-2 2-Bike Platform Rack. It, too, arrived in good condition and in only a few days. One of the drop arm holes does not align as it should, but I am not of a mind to return it and wait for a replacement because of this minor defect (who knows what defect(s) the next one might have.) I just drove the pin home with a rubber mallet. In time, and some lube, I suspect I will be able to install the pin by hand. I test drove the car with the bikes on the rack for only a few miles (bags were still on the bike racks, as you can see from the photo,) but am pleased with the set-up so far. I anticipate enjoying this arrangement much more than our old "strap-on" bike rack.




by:
2013 ToyotaPrius

I installed this on a 2012 Prius following the video for the 2013 model. They are identical in regards of the hitch installation. Over all it took me almost two hours to get it all in place and torqued down. Mainly because getting those bolts started is really a game of patience and I don't have much of that.
I followed the recommendations in previous reviews (use soap or soapy water on the rubber dampener and use a 19mm crow's foot for the bolt blocked by the muffler). I did not completely remove the rubber dampener as you can turn it out of the way once one side is loose. Working on your back with the hitch right in your face (or on your chest) makes anything pretty difficult. I think that if you had a racing jack to lift the back of the car by a few inches could have made a huge difference. Oh, I also followed the advise of a previous review to use the original bolts to help hold the hitch in place while you try to start the bolts that came with the hitch.
The end product if the work is great though and makes you forget the struggle to install it. It's a really nicely designed piece of hardware and though as nails.




by:

This is the second receiver I have purchased for 2 different vehicles. Both of them were delivered within days of ordering and perfect follow up from you guys. Infact I installed both of them within hours of getting them and had no issues and had them installed ready to go in a hour and a half. Thanks great company.




by:

We bought this for our 2012 Prius V. The install was a piece of cake after viewing the accompanying video. The most crucial part, IMO, is making sure you have WD40 to help remove one of the muffler braces. After installed, our 1.25” bike rack fit perfectly and was very stable. Too bad large hitch receivers aren’t recommended for the Prius V, otherwise we would have gone for a 2” one.


Comments
Still working great, it’s so easy to install and remove our bike rack on demand
PDP - 09/14/2021


by:
2012 ToyotaPrius

I installed this Draw-Tite trailer hitch on our 2012 Prius to carry bicycles with our Thule 2-bike carrier. Installation took about 45 minutes. The installation video on the etrailer.com website was a big help. I used a stack of scrap lumber to hold the hitch in place while I bolted it in place.

As others have noted, I bent about a quarter inch of the heat shield so the hitch mated flat against the frame. The shield is soft metal so this is no trouble at all.

For some reason it took me longer than I would have expected to get the bolts started in the holes on the passenger side. I think this was a combination of my gloved hand and the tight space around the muffler. The driver's side bolts found their way much easier. I used the socket and extension to seat them and that's probably what I should have done on the passenger side, too, instead of trying to do it with my hand in that cramped space.

I saw in another review that someone that is 6 feet tall and 170 lbs. had difficulty installing this hitch. I, too, am 6 feet tall and 170 lbs. and did not have trouble getting under the vehicle. The tools needed were exactly as stated (although you may find pliers helpful to bend the heat shield).

I would recommend this hitch to others considering it for their similar Prius model.



25
676
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch



  • Will the Draw-Tite Class I Receiver # 24847 Fit a 2012 Toyota Prius
    According to my contacts at Draw-Tite, the Draw-Tite Class I receiver # 24847 is a fit for the 2012 Prius and the Prius V. I have linked you to the install instructions as well as an install video that you might find helpful. The video shows the hitch being installed on a 2010 Prius, but the procedure for your 2012 Prius V would be very similar.
    view full answer...
  • Will Installation of a Trailer Hitch for a Bike Rack Void the Warranty on a 2012 Toyota Prius
    I know that on some past Toyota Prius models Toyota states that you cannot tow or use a hitch to carry cargo. You will need to consult the vehicle owners manual to determine if this is also true for your 2012 model. If so then if you install a hitch and it causes something to break on the vehicle then that would void the warranty. If Toyota says that you can use a hitch for a bike rack then unless the hitch causes something to break on the vehicle it will not void the warranty. Trailer...
    view full answer...
  • Does Draw-Tite Trailer Hitch # 24847 Fit 2013 Toyota Prius Two
    Yes, the Draw-Tite Trailer Hitch part # 24847 will fit your 2013 Toyota Prius II. I have attached the installation instructions as well as a short video demonstrating the installation of the hitch on a 2012 Toyota Prius. The vehicle is one year older than your Prius, but the installation will be the same. I have also added a hitch cover you may be interested in for your hitch.
    view full answer...
  • Can Hitch 24847 for the 2010 Toyota Prius Be Painted
    I have attached a photo showing the Draw-Tite Class I Trailer Hitch, # 24847, on a 2011 Toyota Prius for you to check out. Unfortunately we do not have photos available of this hitch on a 2010 Prius, but this photo should give you a good idea of what the trailer hitch will look like once it is installed. I have also linked you to the installation instructions and the installation video if you think that you might want to try to install the trailer hitch yourself. There is a small amount...
    view full answer...
    Image 1 for
  • Any Exhaust Heat Issues With Draw-Tite Trailer Hitch, # 24847, On 2010 Toyota Prius
    The Draw-Tite Trailer Hitch for the 2010 Toyota Prius, # 24847, has a larger L-shaped bracket on the right side of the hitch which allows clearance for the muffler. It allows air to circulate around the muffler to keep any heat from transferring to the the plastic bumper. We have sold quite a few of this part number and have not heard of any complaints with the exhaust heat causing any problems. When installing this hitch you will have to remove the tie-down hook on the drivers side...
    view full answer...
  • What is a Draw Bar and Is It Needed to Install Trailer Hitch 24847
    A drawbar (or sometimes called ball mount), is the metal piece that slides into the hitch opening to provide the attachment point for a hitch ball for trailer towing. If you have no plans of towing with the part # 24847 then you would not need the draw bar.
    view full answer...
  • Draw-Tite Trailer Hitch Receiver for 2012 and 2013 Toyota Prius V
    The 2012 and 2013 Toyota Prius V are both compatible with the same Draw-Tite Class I Sport Frame Receiver Hitch # 24847.
    view full answer...
  • Can I Fit a Hitch From a 2005 Toyota Prius on a 2012 Toyota Prius
    For the Draw-Tite Hitch Receiver # 24847 the distance from the center of the mounting hole on the driver's side to the center of the hitch receiver is 18-1/4 inches and from the center of the mounting hole on the passenger's side to the center of the hitch receiver is 18 inches. The distance from the center of either of the mounting holes on the driver's side to the center of either of the mounting holes on the passenger's side is 36-1/4 inches. These two model years require two completely...
    view full answer...
  • Is it Possible for Exhaust on a Toyota Prius to Melt the Bumper After Installing a Trailer Hitch
    No, none of the customers who have reviewed trailer hitch # 24847 mentioned anything about problems with exhaust melting anything. After installation the exhaust should not be any closer to the vehicle than it was before the hitch was installed. If anything the exhaust would be slightly lower than stock meaning it would be about 1/4 inch further down. Also, the hitch would dissipate some of the heat so it would not be transferred to any part of the vehicle that could potentially melt.
    view full answer...
  • Way to Transport a Dirt Bike with a Class I Hitch
    First off you will need to consult the owners manual of your Prius to see if you can tow anything. But the only option I can provide for you would be a small trailer as none of the dollies or carriers would work on your Class I hitch. There are no Class II hitches available for your Prius.
    view full answer...
  • Trailer Hitch for a 2014 Prius Five, Not Prius V
    Draw-Tite trailer hitch # 24847 is listed as a fit for all models of the 2014 Toyota Prius 4-door sedan except for the plug-in models. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
    view full answer...
  • Tongue Weight Capacity for Hitch on a 2014 Toyota Prius V
    The Draw-Tite part # 24847 that you referenced has been confirmed as a fit for your 2014 Prius V. It has a tongue weight capacity of 200 lbs. It sounds like this hitch would have enough capacity for what you are trying to carry with it. But we can't safely recommend you go against what Toyota recommends in the owners manual of your vehicle.
    view full answer...
    Image 1 for
  • Compatibility of Thule Helium Bike Rack with Draw-Tite # 24847 Class I Hitch on 2012 Toyota Prius
    The Thule Helium 3 bike 971XT is compatible with your Prius. However, the hitch and bike manufacturers both agree that only two bikes should be carried on a hitch installed in a Class I hitch. Adding the third bike will place too much weight too far away from the rear of the vehicle. This would create leverage that the hitch and its attachment points to the vehicle weren't designed to handle. Keep it to carrying two bikes, and the rack and the hitch will work just fine on the Prius. You...
    view full answer...
  • Tools Required for Installation of Draw-Tite Sportframe Class I Trailer Hitch on a 2013 Toyota Prius
    To install the Draw-Tite Sportframe Class I Trailer Hitch # 24847 on your 2013 Toyota Prius the tools needed for installation are: 17 mm wrench and socket 19 mm wrench and socket socket driver with a 6 to 8 inch extension a crows foot socket - to tighten down the bolt on the passenger side above the exhaust torque wrench Before installing a hitch, be sure to check your owners manual or contact your local Toyota dealership for any advice or restrictions regarding installing or using a...
    view full answer...
  • Will Draw-Tite Hitch # 24847 Fit 2013 Toyota Prius V
    Although trailer hitches are designed to be a specific fit for vehicles like your 2013 Toyota Prius V, they can flex during shipping. The Draw-Tite Sportframe Trailer Hitch, part # 24847, is designed to be a custom fit for your vehicle. This is a Class l hitch and has a 1-1/4 by 1-1/4 inch receiver opening, and requires no drilling for installation. This hitch has a maximum tongue weight capacity of 200 lbs and a maximum towing capacity of 2000 lbs. All hardware and instructions are included...
    view full answer...
  • Can 2008 Prius and 2014 Prius V Accept the Same Trailer Hitch Receivers
    Although we do offer several choices in Class I trailer hitch receivers for both the 2008 and 2014 model years of the Toyota Prius, the hitches for one model year are not compatible with the other. The two model years are part of different generations of the vehicle and so have differing frame structures. I have provided two links for you; one is for hitches for the 2014 Prius V and the other for hitches for the 2008 Prius. A Class I hitch is considered a light-duty hitch primarily to...
    view full answer...
  • Trailer Hitch Fit Recommendation for 2011 Toyota Prius
    There was a large enough difference between the 2009 and 2010 Toyota Prius that they had to change the trailer hitch design all together. That means that for your 2011 Prius you would need the Draw Tite part # 24847 as you older hitch will not fit.
    view full answer...
  • What is the Distance From Center of Hitch Pin Hole to the End of Receiver Opening and Inner Tab
    For the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4", # 24847, the measurement from the center of the hitch pin hole to the end of the receiver opening is 2 inches. From the center of the hitch pin hole to the inner stop tab also measures 2 inches. This hitch is designed to custom-fit the 2010-2015 Toyota Prius and the 2012-2017 Prius V. The hitch is rated Class I with an 1-1/4 receiver opening.
    view full answer...
  • Recommendation of Hitch for 2010 Toyota Prius
    We have a couple of hitches that will work with your 2010 Toyota Prius (see link). All of the hitches are bolt on installations with no drilling or welding required. I would recommend the Draw-Tite Class 1 Trailer Hitch, item # 24847, for your vehicle. This hitch comes with the pin and clip for your vehicle and has a good fit close to the underside of the rear fascia. All of the hitches will install with the receiver just under the rear fascia. Some items you may need to complete your...
    view full answer...
  • Trailer Hitch Availability for 2016 Toyota Prius V
    The 2 inch hitches are only used on larger vehicles like SUVs and trucks. The lighter duty vehicles get the lighter duty 1-1/4 inch hitches. And there isn't a vehicle more lighter duty in terms of towing than a Prius. The hitch you would want is the Draw Tite hitch part # 24847 which is a confirmed fit. I like the Draw Tite hitch better than the Curt because it does not require a stabilizer strap when carrying a non-supported load like a bike rack.
    view full answer...
  • What Is The Weight Of Draw-Tite Trailer Hitch # 24847
    The Draw-Tite Hitch, part # 24847, weighs 19 lbs, and the Hidden Hitch Trailer Hitch, part # 60263, weighs 24 lbs which includes the included drawbar.
    view full answer...
  • Hitch Availability for 2014 Toyota Prius 3
    There are several options in Class I hitches for your 2014 Toyota Prius 3, and all can be seen on the link provided. All are 1-1/4-inch light-duty hitches suitable for carrying up to two bikes on a hitch bike rack (or for light towing if your Prius owner's manual indicates this is permissible). If you plan to use a bike rack I suggest the Draw-Tite # 24847, our most popular hitch for your Prius. This comes with all required installation hardware - no drilling or welding required. I have...
    view full answer...
  • Class I Trailer Hitch for a 2015 Toyota Prius
    For a trailer hitch for your 2015 Toyota Prius the most popular option is Draw-Tite hitch # 24847. It fits the 2015 Prius Two, Three, and Four. This is a Class I trailer hitch so any accessories used will have to be compatible with a Class I hitch. On a bike rack you are limited to 2 bikes on a Class I hitch.
    view full answer...
  • Is a 2 Inch Hitch Available for a 2010 Toyota Prius?
    The only available hitches for a 2010 Toyota Prius have 1-1/4" receiver openings and are Class I rated. Class I racks are limited to carrying two bikes, though there are some that have an available adapter that allow bikes to be used with either a 2" or 1-1/4" hitch. For a hitch I recommend the Draw-Tite Sportframe # 24847 because it will not require the use of stabilizing straps with a bike rack the way the Curt hitch will. I've added a link to a video install of this hitch on a '10 Prius...
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .8



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Joe B
Test Fit:
Joe B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010