Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75560
Retail:$366.13
Our Price: $219.77
You Save: $146.36
Confirmed to Fit
2006 Subaru Outback Wagon
excluding Sport
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (470)
- Q & A (0)
- Photos
2006 Subaru Outback Wagon - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 4000
- Visible Cross Tube
- Draw-Tite
- 400
- Custom Fit Hitch
Fully welded Subaru Outback Wagon trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Not rated for use with weight-distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75560 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87446 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation
California residents: click here
Complete Towing Package for 2006 Subaru Outback Wagon
Retail:$428.31
Package Price:$352.27
2006 Subaru Outback Wagon Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Outback Wagon Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75560
Average Customer Rating: 4.9 out of 5 stars (470 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection.by: Daniel06/29/2023
2008 SubaruOutback Wagon
Great hitch and delivery came as promised, very quickly. It was a bit tricky installing - being careful and thorough, it took 2 hours. The hitch is strong and will hold 400 pounds, plenty for the 73 pound e-bikes we have.
by: Cole06/02/2023
2009 SubaruOutback Wagon
Fit was perfect and the install video was clear and helpful! Pictures also show tongue for bike rack.
by: Thomas 12/26/2023
2009 SubaruOutback Wagon
Fairly easy install, even just using a jack. Just followed the video and it took me about 90 minutes with some help from my son. It's hard to imagine doing this without an extra set of hands when actually installing the rack in place, but I'm a B- mechanic and I pulled it off. The rack seems super solid, and if the two previous racks I've ordered from etrailer are any guide, this thing will probably outlast the car it's attached to
by: RJW-NC10/28/2022
The hitch fit our 2008 Subaru outback wagon perfectly. Installation was straightforward and fairly quick.
It has been in use for a year and we are completely satisfied with the purchase!
by: Jordan 03/21/2024
Fit perfectly instructions were clear, only issue I found is I like torque specs and it didn't come with any also nothing about using lock tight on bolts but I would recommend it
by: Michael 02/24/2024
Works great I've used it a bunch for camping and pulling my trailer for the dirtbike
by: Portland, Oregon11/10/2023
The install was quite surprisingly simple. Thanks for the installation video etrailer! Really like the 2” receiver which seems be more accessorized in the market. The strength of this hitch and appearance (for the money) is superior to the smaller receiver offering.
by: Tom05/28/2017
2005 SubaruOutback Wagon
Over the past 3 months I have been fixing and replacing parts on my, new to me, 05 Subaru Outback. Sway bar links, lower control arm bushings, driveline, tires, struts... and a taller hitch. Of all the products I've ordered and replaced none have been as easy to install as this hitch. Etrailer provided a YouTube video all the hardware bolts, nuts, spacers needed to do the job. They contacted me via email after my order was placed after it was shipped and after it arrived. Very customer oriented and well designed product. From a retired engineer, this hitch is simple strong and well crafted. I couldn't be happier.
Tom A.
5/29/2018
Great trailer hitch, getting ready to order one for my new Jetta sport wagon.
by: Atsushi03/15/2022
It's been a year of usage and I have no issue. The wiring harness is also working just fine.
Great products and great customer services!
I would highly recommend anyone who is planning to install a hitch receiver.
Atsushi
6/13/2023
It has been wonderful since I installed the hitch. I use for towing a kayak trailer for a local clean up volunteer group. Its been no issues whatsoever. Unfortunately, my car was totaled and lost the vehicle and the hitch. I am looking for another Outback and if it doesnt come with the hitch, I know where to buy again!
Mike L.
9/6/2023
@Atsushi So sorry that happened, that's awful! If you need help choosing a replacement tow setup for your new vehicle, let us know. We'd be happy to help!
by: John 04/12/2024
2005 SubaruOutback Wagon
The Hitch worked perfectly took less than 30 minutes to install completely got to recommend it to anybody that's got a Subaru
by: John W.07/31/2018
Very solid hitch. Easy to install (with some help from someone far handier than I am). Installation was simple, just 5 bolts. Hardest part was lowering the exhaust assembly. I would recommend this company to friends, George emailed me personally when the hitch was delivered.
John W.
7/31/2019
1 yr. update - Tow hitch worked great. Just sold the car, now I need another tow hitch. Be contacting you guys soon.
by: Michael03/29/2020
Best price found,arrived on time,packed well. Super easy install for hitch and wiring,fit perfect. Thank you for the flawless transition. If you need a hitch these are the people to call.
Michael C.
3/30/2021
I use the hitch all the time,have a small and a large utility trailer haul tons of pellets every year. Very happy with my purchase,
by: Patrick A04/27/2018
2006SubaruOutback Wagon
Easy to install on my '06 Outback H6 3.0., happy to have a 2" hitch available. Just had to pop a few rubber exhaust hangers to get it in. Considerably cheaper than trailer rental place shipped. Bought it mostly to mount a bike rack, but it has been used to tow a 'lil trailer several times. End of the hitch is about 3.5" recessed behind the rear bumper line, so pretty low visibility when not in use if that matters to you. I would've designed it to mount on top of the rear tow loop as opposed to under it to get that extra 1-1.5" of ground clearance available to reduce my bike rack bottoming out on the steepest of driveways.
by: NJ Outback04/04/2024
SubaruOutback Wagon
Had my garage remove a very rusty older bar from my '06 Outback and fit this one so I could attach a new Thule MTB rack to 2" hitch. It's been rock solid and has worked perfectly.
by: Edwin02/05/2020
The hitch arrived so fast! I unboxed it in the driveway. I had it installed within three hours of arrival. The fit was perfect. The installation simple and straight-forward. The quality was superb. All necessary items were included. I had reviewed the installation video so I didn't even reference the included instructions. Overall I am very impressed.
Edwin T.
2/6/2021
Its been solid and trustworthy.
by: Steven10/08/2019
Got this hitch for my 05 Outback XT. I got it mainly for my bike rack carrier, but also so I can tow a small utility trailer in the future. Hitch was very easy to install (did it by myself). Had to tap out 2 holes due to rust, but other than that, install was smooth. I really like how it looks on my car. Had a few paint chips (I’m assuming from shipping or storage) that I had to touchup after I put the hitch on but that was no big deal. Customer service was awesome, I give a shout-out to Rose G for being awesome and helping me out. I would Definitely recommend etrailer to anyone for there trailer and hitch needs.
by: Rod10/02/2019
2006SubaruOutback Wagon
# 75560 Draw-Tite Trailer Hitch 2" Receiver, for 2006 Subaru Outback. Video for 2008 model has good tips. However, 2005 and 2006 are different. The same 4 capped factory nuts are there, but only the two rear-most are used. Further back, a bolt must be removed from the angle iron bracket holding the rear bumper on. One on each side. Toss the bolt and use longer bolt, supplied. Before removing the bumper bolt, use a crow bar to do some bending. Very close fit between rear-most hitch anchor points and bumper bracket. Mine didn't fit. Car was too wide and hitch too narrow. Barely. Vertical part of bumper bracket angle iron needs to be bent in. Leave bracket bolts in to insure the right part is stressed and bent. Two inches of the forward most end of the angle iron has a gap between horizontal and vertical. -They don't meet at the corner. Helps in bending the vertical. 2005 install video by etrailer was very helpful. Theirs fit right out of the box.
by: Dave Cliett02/26/2012
2005 SubaruOutback Wagon
I found the information on the etrailer site to be very informative and helpful. Found the install video to be "right on" except that I needed to drop both of my mufflers to get the hitch into position (2005 Subaru Outback LL Bean Edition 3.0). Other than that, the install went as described in the video, and very close to the estimated time. I've included a few pics. Very happy with the customer service from etrailer. Shipping was fast, communications regarding my order were excellent, and the product is a quality hitch exactly as described. Thank you!
by: Josh01/20/2024
2008 SubaruOutback Wagon
Went in easy, replaced the 1 1/4 inch that came with the car. Perfect fit.
by: Mike-Etrailer04/07/2024
Worked out great, installed on wife's 09 Outback and not mods needed, direct install just like described.
by: Jon07/02/2018
2006SubaruOutback Wagon
Received products in a couple days from ordering. Everything was packed well and intact. Installation was super easy after watching the video a couple times. It probably took me more time to figure out where the lift points were on my Subaru than to actually attach the hitch. The installation kit included all the bits I needed and contained clear information (especially in combination with the video). Will absolutely recommend the DrawTite hitch and eTrailer!
by: Alan E02/11/2012
Installation was as quick as described.
However, there was some amount of work to remove the mud guards in order to drop the muffler system. Removal took some work since 3 different fasteners were used.
I was working at home alone using a set of ramps to access the rear of the car, and it took some work to:
1. lift the hitch assembly into place. Hint, lift one side and loosely fit a bolt, then do the other side. and
2. lifting the muffler system into place required a set of straps attached to the roof rack and progressively raising each side.
Maybe a younger person would find it easier, but it is either a two person job, or it requires some thought and experiment.
by: Brian07/15/2019
2006SubaruOutback Wagon
Saved a ton of money this way over the local shop. I was initially nervous about installing this one since I had to lower the exhaust to do it (bought my vehicle used a few weeks ago and it has an aftermarket exhaust). Turns out those concerns were way overblown. Install tips (use a safety strap on the exhaust) were great - worked like a charm. Just took a little over an hour to install mostly by myself (wasn't going for speed records).
Very excited - seems like a well made solid hitch. Shipping was quick. I would definitely buy again - but I've now put a hitch from etrailer on all my vehicles in the last two weeks. So hopefully that won't be for a few years....
by: Brandon N.05/06/2014
2015 SubaruOutback Wagon
The hitch and the custom fit wiring were easy to install on my 2006 Subaru Outback. It took me about an hour to install the hitch (by myself without lifting the vehicle). Lifting the vehicle or another person would have cut that time at least in half. And it only took about 15 minutes to connect the wiring. I would highly recommend anyone who purchases these items to watch the installation videos first as they were extremely helpful. Thank you
by: Nick S.08/10/2016
2006SubaruOutback Wagon
Arrived fast! Installation took, maybe, 90 minutes by myself. Fit perfect. I highly recommend the installation videos on the website. They are very clear and easy to follow. Can't wait to use the receiver for our cargo rack for our upcoming trip.
Only issue I ran into was the plate for the rear bolt had to be shaved down a bit for a better fit. Very, very minor issue. I'll be ordering through etrailer.com again! Thanks guys!
25
477
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Will I have to Drill Holes in the Frame to Install Draw-Tite Hitch 75560 on a Subaru LegacyThis Class III hitch by Draw-Tite for the Subaru Legacy uses existing holes in the vehicle frame, no drilling is required. On a wagon model the forward most bolts on either side will need to be removed. The other holes used should have plastic plugs covering the weld nuts which which will need to be removed. I have added a link to the instructions below so you can see exactly what will be involved in installation.
view full answer... - Does Draw Tite Hitch # 75560 Fit 2006 Subaru Legacy Outback TurboYes, the Draw Tite hitch part # 75560 that you referenced is a confirmed fit for your 2006 Subaru Legacy Outback Limited that has a turbo. We confirmed this with Draw Tite.
view full answer... - Recommended Trailer Hitch for 2007 Subaru Outback Wagon The Draw-Tite Max-Frame Trailer Hitch Receiver # 75560 referenced in your question is the correct trailer hitch for your 2007 Subaru Outback Wagon (excluding Sport) that has the dual exhaust. I have attached an image that shows this trailer hitch on the 2007 Outback Wagon that has a dual exhaust like yours. This Class III trailer hitch is custom-fit for this vehicle and will use existing holes in the vehicle frame for a no-drill installation. It will provide a 2 inch receiver opening...
view full answer...
- Will the Draw-Tite Hitch 75560 Reduce Ground Clearance on a 2008 Subaru OutbackWhen we installed the Draw-Tite Hitch part # 75560 on a 2008 Subaru Outback like yours we found that the top of the hitch measured 13-1/2 inches from the ground. In most circumstances this wouldn't be an issue. We have a ton of reviews for this hitch from our customers and none of them reported any dragging. Actually one customer said that this hitch won't be the lowest point on the car, so technically it wouldn't reduce ground clearance. Check out the install video for more install info.
view full answer... - Are Torque Specs for Hitch Installs Important to FollowI can only safely recommend you torque the install bolts of the Draw Tite Hitch part # 75560 to the figures that are listed in the install instructions, but it would be safer to have the bolts tighter than spec as opposed to not as tight. If there is anyway you can verify that you have the correct torque on the hardware by maybe finding a better torque wrench that would be your safest and best option. I attached an install video for you to check out for more info.
view full answer... - Will the Trailer Hitch Rust and Will it Hit the Exahust on a 2008 Subaru OutbackThe same hitches are offered for the 2005 - 2008 model year Subaru Outback wagons. Hitches are made out of steel and constantly exposed to the elements so may eventually rust. Each manufacturer we offer coats the hitches with a paint that is will prevent and ward off rust. If hitches are damaged or scratched and the metal is exposed than it can rust. Sliding a bike rack or cargo carrier in and out of the hitch will scratch away the paint inside the hitch, but a hitch cover will keep the...
view full answer... - Height from Ground When Draw Tite 75560 is Installed on 2008 Subaru OutbackWhen the Draw Tite hitch part # 75560 is installed on your 2008 Subaru Outback the hitch height measured from the top of the hitch opening to the ground is 13-1/2 inches.
view full answer...
- Recommended Trailer Hitch Receiver for 2006 Subaru Outback 3.0 LL Bean EditionThe 2006 Subaru Outback LL Bean Edition with 3.0L was basically a really nice trim model with heated leather seats and a moonroof. It didn't change the hitch fit so I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75560. This hitch is compatible with the wagon or sedan model and will give you a 2 inch receiver that will give you more bike rack and other accessory options. It will sit just under your rear bumper for a clean look. I've attached...
view full answer...
- Hitch Recommendation for a 2009 Subaru Legacy Sedan to Carry a Scooter CarrierThe Draw-Tite Hitch part # 75560 that you referenced is the correct hitch for your 2009 Subaru Legacy Sedan. This hitch has a tongue weight capacity of 400 lbs, so that means that if the weight of your 290 lb scooter and carrier together weighs less than 400 lbs this hitch should work well for you. Basically if your carrier weighs less than 110 lbs (which it should) you would be fine. However, you need to also check the owners manual of your vehicle and determine what Subaru lists as the...
view full answer... - Installation Instructions For Draw-Tite Hitch 75560 on 2009 Subaru OutbackThank you for the purchase of the Draw-Tite Max-Frame Trailer Hitch Receiver # 75560 for your 2009 Subaru Outback. I have added a link below to the installation instructions in English, and added a cut out for you showing the torque specs. I have also added a link below to a video install we did on a similar model year Outback for you to check out of the Draw-Tite Max-Frame Trailer Hitch Receiver # 75560.
view full answer...
- Trailer Hitch for a 2009 Subaru Outback with 2 MufflersMost mufflers are hung on small black rubber hangers. You will simply need to pop these off, and lower the mufflers. It will help if you use some spray lubricant prior to removal of the hangers. The Draw-Tite Hitch Class III Trailer Hitch part # 75560, is custom fit to some model years of the Subaru Legacy and Outback, and will attach to four pre-drilled holes with existing weld nuts on the vehicle frame. If you have the Outback Sport model then there is not a hitch available at this time.
view full answer... - Will Draw-Tite Class III Hitch # 75560 Fit 2006 Subaru Outback 3.0R 6 Cylinder Yes, the Draw-Tite Class III Max Frame Receiver Hitch # 75560 referenced in your question is a confirmed fit for the 3.0R model 2006 Subaru Outback wagon. The different trim style and interior upgrades on the 3.0R do not affect the hitch fit at the rear of the vehicle. This Class III hitch will use existing holes in the Outback's frame for no-drill installation and will provide you with a 2 inch receiver that has a 4,000 pound towing weight capacity and a 400 pound tongue weight limit....
view full answer... - Recommended Class III Hitch for Use with 2-Inch Bike Rack on 2006 Subaru Outback WagonYou are fortunate that for your 2006 Subaru Outback Wagon we offer three different hitch Classes, including the 2-inch Class III type which is what I recommend. Draw-Tite 2-inch hitch # 75560 installs without drilling using included hardware. (This does NOT fit on the Sport verion, please note.) An installation article and video are linked. Using a 2-inch hitch avoids the expense and weight capacity losses of hitch adapters and will result in a safer set-up. All adapters cause you to lose...
view full answer... - Trouble Lining Up Bolt Holes to Install Draw-Tite Hitch on 2006 Subaru LegacySounds like you either have the Draw-Tite Class II # 36334 or Class III # 75560 hitch receiver for your 2006 Subaru Legacy. While this is a custom fit hitch that should bolt right up no problem, the mounting brackets may have become bent during shipping which is why you're having issues getting the bolt holes to line up (if you're talking about something else please let me know). This is common enough that we actually have a helpful article on how to handle this type of situation which...
view full answer... - Installation Process for Draw-Tite Class III Hitch 75560 on 2007 Subaru Outback WagonThe Draw-Tite Class III Hitch # 75560 is a correct fit for your 2007 Subaru Outback Wagon as long as it is not the Sport edition. For reference I have linked the written installation instructions, which indicate the torque specs, and also an installation video showing the process in your exact same vehicle. If the hitch is being installed for a second time please note that you cannot re-use the original installation hardware. Hitch hardware is one-time-use only. If you need a new kit of...
view full answer... - Trailer Hitch Fits for 2005 Subaru Outback WagonThe four hitches offered for the 2005 Subaru Outback Wagon are shown on the linked page. These different hitch classes fit the variants of the vehicle, such as the Sport edition. On each hitch's page we list the compatible vehicles that the hitch will fit. For example, Draw-Tite 2-inch Class III hitch # 75560 fits the following vehicles: 2008 - 2009 Subaru Legacy 2005 - 2007 Subaru Outback Sedan excluding Sport 2005 - 2009 Subaru Outback Wagon excluding Sport 2005 - 2007 Subaru Legacy...
view full answer... - What Vehicles Does the Draw-Tite Max-Frame Trailer Hitch Receiver 75560 FitThe Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75560 fits the following vehicles: 2005 - 2007 Subaru Legacy Wagon 2005 - 2007 Subaru Outback Sedan excluding Sport 2008 - 2009 Subaru Legacy 2005 - 2009 Subaru Outback Wagon excluding Sport 2005 - 2007 Subaru Legacy Sedan This hitch is not confirmed to fit your 2002 Subaru Outback Wagon. For a hitch that is a confirmed fit for your vehicle I recommend the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class...
view full answer... - What Vehicles Does Draw Tite Hitch # 75560 FitHere's full list: 2008 - 2009 Subaru Legacy 2005 - 2007 Subaru Outback Sedan excluding Sport 2005 - 2009 Subaru Outback Wagon excluding Sport 2005 - 2007 Subaru Legacy Sedan 2005 - 2007 Subaru Legacy Wagon You should note that install hardware is considered one time use since so the next person will need new hardware. For that you can order part # RHK from us to get new hardware.
view full answer... - Availability of Replacement Hardware for Trailer Hitch on Subaru Legacy Absolutely. We do have complete replacement hardware kits for trailer hitches available with part # RHK. Once on the product page you will need to type in the hitch model number in the box provided and select the manufacturer in the drop-down menu. We'll then send out the full hardware kit so you can get your hitch attached to your Subaru Legacy. Just as an example, if you happen to have the Draw-Tite Max-Frame # 75560 (which is a confirmed fit for your 2007 Legacy), you will type in "75560"...
view full answer... - Will Trailer Hitch 87446 Fit on a 2015 Subaru Outback Wagon The part 87446 that you referenced was a Hidden Hitch trailer hitch receiver that was replaced with the Draw-Tite part # 75560. I do have a solution for you, but unfortunately your current trailer hitch is not compatible with your 2015 Subaru Outback Wagon. A similar hitch receiver is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75673 which is a Class III hitch with a 2 inch receiver opening just like what you have. It has a 4,000 lbs gross towing weight rating with a 600 lb tongue...
view full answer... - Hitch Recommendation for a 2007 Subaru Outback Wagon V6 LL BeanThe Draw-Tite Trailer Hitch # 75560 would be a great choice for your LL Bean version of your 2007 Subaru Outback Wagon with a V6. We had a customer come back and say this hitch fit his V6 model and that the exhaust of his vehicle didn't interfere with the install. I attached an install video for you to check out as well.
view full answer... - Draw-Tite Trailer Hitch Fit for 2008 Subaru Outback WagonThe Draw-Tite 2-Inch Class III Max Frame Hitch # 75560 is a confirmed fit for your 2008 Subaru Outback Wagon as long as you do not have the Sport Edition. One of our local customers purchased this hitch for their 2008 Outback and the linked video shows you the entire installation process. I also linked two helpful articles on hitch installation to make your project go more easily. If you will be towing you will need a wiring harness # 118461 to power your trailer's lights. I also suggest...
view full answer... - Trailer Hitch and Wiring for a 2005 Subaru Legacy GT WagonFor your 2005 Subaru Legacy Wagon there are both Class II and Class III trailer hitches available. I recommend a Class III hitch with a 2 inch receiver such as # 75560 because it will be stronger and the 2 inch receiver affords you many accessory options. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with...
view full answer... - Trailer Hitch and Wiring for a 2008 Subaru Outback 3.0 LL Bean EditionYes, Draw-Tite trailer hitch # 75560 fits the LL Bean models of the 2008 Subaru Outback. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Kathleen M
Written by:
Lindsey S
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Andrew S
Video by:
Andrew L
Video by:
Alan C
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rjw-nc
10/29/2023
Works great. Fit and finish were great and we havent had any issues in the year!